DIGITEK DTMHA-001 Table Mount with Auxiliary Holding Arm Stand User Manual

Indledning

This manual provides instructions for the proper setup, operation, and maintenance of your DIGITEK DTMHA-001 Table Mount with Auxiliary Holding Arm Stand. Please read this manual thoroughly before use to ensure optimal performance and safety.

Produktkomponenter

The DIGITEK DTMHA-001 Table Mount with Auxiliary Holding Arm Stand includes the following components:

Billedbeskrivelse: An image displaying all components included in the box. These include the main table mount stand, the auxiliary holding arm, a universal phone clamp, two screw adaptors (3/8" and 5/8"), and a user manual/warranty card. Each item is laid out clearly against a dark background.

• Digitek Table Mount Stand
• Hjælpeholdearm
• Universal Telefon Clamp
• 2 Screw Adaptors (3/8" & 5/8")
• Brugervejledning (dette dokument)
• Garantikort

Se diagrammet nedenfor for en oversigtview of the product's main parts.

Billedbeskrivelse: A detailed diagram labeling the various parts of the Digitek DTMHA-001 Table Mount. Key components identified are the Camera Connection Screw, Ball Head Securing Knob, Vertical Ball Head, Tube Clamp, Horizontal Ball Head, Tube Securing Knob, Aluminum Alloy Tube, Clamp Securing Bolt, Rubber Pad, and C-Shaped Clamp with its Securing Knob.

Opsætningsinstruktioner

1. Fastgør Clamp to a Surface:

   Drej clamp securing knob counter-clockwise to loosen it. Position the C-shaped clamp onto the edge of a desk or table. Ensure the rubber pad is in contact with the surface to prevent damage and provide a secure grip. Turn the clamp securing knob clockwise to tighten it firmly. Ensure the clamp is set up on an even desk surface or counter for stability.

   

   Billedbeskrivelse: An illustration showing the installation of the table mount onto a desk. The C-shaped clamp is shown being secured to the edge of a wooden desk. Insets highlight anti-slip silicone clamps, secure grip on any surface, and easy attachment/removal features.

2. Adjust Main Stand Height:

   Loosen the tube's securing knob on the main stand. Extend the aluminum alloy tube to your required height. Once the desired height is reached, tighten the tube's securing knob clockwise to lock it in place.
3. Attach Auxiliary Holding Arm (Optional):

   Løsn røret clamp on the main stand. Position the auxiliary holding arm onto the main pole at your desired height and orientation. Tighten the tube clamp to firmly attach the auxiliary arm.

   

   Billedbeskrivelse: A visual demonstrating the adjustable height and flexibility of the auxiliary holding arm. It shows the arm extended and folded, with specifications for folded height (35cm), maximum diameter (22mm), and adjustable height range (440mm to 1211mm) across 3 sections.

4. Monter din enhed:

   The stand features a camera connection screw and a 360° ball head. Attach your camera, phone (using the universal phone clamp), or LED light to the ball head. Ensure the device is securely fastened.

   

   Billedbeskrivelse: This image illustrates the versatile mounting options and screw compatibility of the stand. It shows different screw sizes (1/4", 3/8" & 1/4", 5/8" & 1/4") for various devices. An inset also displays the phone clamp, indicating its folded size (8cm) and extended size (11cm).

Betjeningsvejledning

1. Adjusting Ball Head Angle:

   Loosen the ball head securing knob. Adjust the angle of your mounted device as needed. The 360° ball head allows for flexible positioning. Once the desired angle is achieved, tighten the ball head securing knob to lock it.

   

   Billedbeskrivelse: A visual guide demonstrating the 360° ball head movement. It shows how to make quick adjustments using the twist lock mechanism and illustrates the full 360° rotation and 120° tilt capability of the ball head for achieving panoramic shots.

2. Using the Auxiliary Arm:

   The auxiliary arm provides additional flexibility for positioning lights, microphones, or a second camera/phone. Loosen the arm's joints to adjust its position and angle, then tighten to secure.

3. Generelle tip til brug:
   • Always ensure all knobs and clamps are securely tightened before leaving your equipment unattended.
   • Avoid over-tightening, which can damage the threads or components.
   • Distribute weight evenly when mounting multiple devices.

Opretholdelse

• Rensning: Wipe the stand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Opbevaring: Store the stand in a dry, cool place away from direct sunlight and extreme temperatures.
• Inspektion: Periodically check all screws, knobs, and joints for tightness. Ensure the rubber pads on the clamp are intact and provide adequate grip.

Fejlfinding

• Stativet føles ustabilt:

  Ensure the C-shaped clamp is fully tightened to a stable, flat surface. Verify that the tube securing knob is tight and the main stand is not wobbling. Check that the surface itself is sturdy.
• Device is slipping from ball head:

  Confirm that the ball head securing knob is fully tightened. Ensure your device is properly attached to the camera connection screw or phone clamp.

• Auxiliary arm not holding position:

  Spænd røret clamp and the individual joints on the auxiliary arm. Avoid placing excessively heavy items on the auxiliary arm.

Specifikationer

Garanti og support

For warranty information and customer support, please refer to the warranty card included in your product packaging. You may also contact Digitek customer care:

• E-mail: support@digitek.net.in
• Gratis nummer: 1800-123-544-444

Please have your model number (DTMHA-001) and purchase details ready when contacting support.