Brugermanual til trådløs ECHTPower-controller

Indledning

Tak for købetasing the ECHTPower Wireless Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS devices. Featuring Hall Effect joysticks for precise control, customizable RGB lighting, programmable back buttons, and adjustable vibration, this manual will guide you through its setup, operation, and maintenance.

Figure 1: ECHTPower Wireless Controller in Classic Gray.

Pakkens indhold

• 1 x ECHTPower Wireless Controller (Model: ES01GY)
• 1 x USB-C opladningskabel
• 1 x Brugermanual (dette dokument)

Controller layout

Figur 2: Forside view of the controller showing buttons and joysticks.

• 1. Left Analog Stick: Hall Effect joystick for precise movement.
• 2. D-Pad: Navigationspad til navigation.
• 3. Minus (-) Button: Systemfunktionsknap.
• 4. Screenshot Button: Capture in-game screenshots.
• 5. Hjem-knap: Return to the system home screen.
• 6. Plus (+) Button: Systemfunktionsknap.
• 7. A/B/X/Y Buttons: Standard handlingsknapper.
• 8. Right Analog Stick: Hall Effect joystick for camera control or aiming.
• 9. M Button: Knap til makroprogrammering.
• 10. Turbo Button: Activate/deactivate turbo function.
• 11. L/R Buttons: Skulderknapper.
• 12. ZL/ZR Buttons: Udløserknapper.
• 13. MR/ML Buttons: Programmerbare tilbageknapper.
• 14. USB-C Port: Til opladning og kabelforbindelse.

Figur 3: Tilbage view of the controller highlighting the MR and ML programmable buttons.

Opsætning og tilslutning

Opladning af controlleren

Before first use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., console, PC, USB wall adapter). The LED indicators will show charging status and turn off when fully charged. A full charge provides approximately 10-16 hours of continuous gameplay.

Tilslutning til Nintendo Switch

1. Fra HOME-menuen skal du vælge "Controllere" > "Skift greb/rækkefølge".
2. På controlleren skal du trykke på og holde Hjem-knap for 3 seconds until the LED indicators start flashing rapidly.
3. Når den er tilsluttet, lyser den/de tilsvarende afspiller-LED('er) på controlleren konstant.
4. To wake up the Switch console from sleep mode, press the Hjem-knap på controlleren.

Note: This controller cannot wake up the Switch2 console.

Figure 4: The controller is compatible with Nintendo Switch and other platforms.

Tilslutning til pc (Windows)

• Trådløs (Bluetooth):
  1. Sørg for, at din pc har Bluetooth aktiveret.
  2. På controlleren skal du trykke på og holde Hjem-knap for 3 seconds until the LED indicators flash rapidly.
  3. Gå til Bluetooth-indstillingerne på din pc, og vælg "Tilføj enhed" eller "Tilføj Bluetooth eller anden enhed".
  4. Select "Bluetooth" and choose "Pro Controller" or "Wireless Controller" from the list.
  5. Once paired, the LED indicators will stop flashing and remain solid.
• Kablet (USB-C):
  1. Tilslut controlleren til din pc med USB-C-kablet.
  2. The controller will be automatically recognized as a gamepad.

Tilslutning til Android/iOS-enheder

1. Aktiver Bluetooth på din Android- eller iOS-enhed.
2. På controlleren skal du trykke på og holde Hjem-knap for 3 seconds until the LED indicators flash rapidly.
3. On your device, search for Bluetooth devices and select "Pro Controller" or "Wireless Controller" to pair.
4. Once paired, the LED indicators will stop flashing and remain solid.

Betjeningsvejledning

Hall-effekt joysticks

The controller features advanced Hall Effect joysticks, which use magnetic sensors instead of traditional mechanical contacts. This design significantly reduces stick drift, enhances precision, and increases durability compared to conventional joysticks.

Figure 5: Hall Effect joysticks offer enhanced precision and durability.

RGB-lysjustering

The analog sticks are equipped with RGB LED lights that can display 9 different colors. You can customize the lighting effects:

• Enkeltfarvetilstand: Tryk og hold på Lys knap (usually located near the back buttons or on the front face) to cycle through the 9 available colors. Release the button to select your desired color.
• Åndedrætstilstand: Fortsæt med at trykke på Lys knap to activate breathing mode, where colors gradually change.
• Sluk lyset: Tryk og hold på Lys knap until the lights turn off.

Programmable Back Buttons (MR/ML) and Macro Function

The MR and ML back buttons can be programmed to single buttons or complex macros, providing a competitive edge and reducing hand fatigue.

1. Single Button Assignment:
   1. Tryk på M-knap once. The LED indicators will flash slowly.
   2. Press the back button you wish to program (MR or ML). The LED indicators will flash rapidly.
   3. Press the button you want to assign (e.g., A, B, X, Y, L, R, ZL, ZR, D-Pad directions, or analog stick clicks).
   4. Press the back button (MR or ML) again to confirm. The LED indicators will stop flashing.
2. Makrooptagelse:
   1. Tryk og hold på M-knap for 3 seconds until the LED indicators flash rapidly.
   2. Press the back button you wish to program (MR or ML).
   3. Input the sequence of buttons you want to record (e.g., A, B, X, Y, then release).
   4. Tryk på M-knap again to save the macro. The LED indicators will stop flashing.
3. Clear Assignment/Macro:
   1. Tryk på M-knap once. The LED indicators will flash slowly.
   2. Press the back button (MR or ML) you want to clear.
   3. Tryk på M-knap again. The LED indicators will stop flashing, and the assignment/macro will be cleared.

TURBO Continuous Fire Function

The TURBO function allows for rapid, continuous input of a button press, reducing the need for repeated presses.

1. Aktivér TURBO: Tryk og hold på Turbo-knap, then press the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR). The button will now continuously fire as long as you hold it down.
2. TURBO Hold Mode: To activate continuous fire without holding the button, press the Turbo-knap, then press the desired action button, and then press the Turbo-knap again. The button will now continuously fire on its own.
3. Juster TURBO hastighed: While in TURBO mode, press and hold the Turbo-knap og flytte Right Analog Stick Up/Down to cycle through 3 different speeds (slow, medium, fast).
4. Deaktiver TURBO: Tryk og hold på Turbo-knap, then press the action button again. Alternatively, press the Turbo-knap and the action button twice to deactivate TURBO Hold mode.

Figure 6: The TURBO function simplifies rapid button presses during gameplay.

Vibrationsjustering

The controller features 4 levels of vibration intensity to match your preference and game immersion.

• For at justere vibrationsintensiteten skal du trykke på og holde Turbo-knap og flytte D-pad op/ned.
• The vibration intensity will cycle through 4 levels: None, Low, Medium, High.

Figure 7: The controller's vibration motors provide immersive feedback.

6-akset gyrosensor

The built-in 6-axis gyro sensor allows for precise motion control in compatible games. This feature quickly detects the controller's tilt angle, providing intuitive and responsive gameplay, especially in titles that utilize motion aiming or steering.

Video demonstration

Vedligeholdelse og pleje

• Rengør controlleren regelmæssigt med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Undgå at udsætte controlleren for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Do not disassemble the controller. This will void the warranty.
• Opbevar controlleren et sikkert sted, når den ikke er i brug, for at forhindre skader.
• If the controller will not be used for an extended period, charge it at least once every three months to maintain battery health.

Fejlfinding

Specifikationer

Garanti og support

ECHTPower products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service inquiries, please contact ECHTPower customer support through the retailer's platform or visit the official ECHTPower webwebsted.

Gem venligst dit købsbevis for garantikrav.