Altera Maresca Foldable Electric Treadmill

Indledning

This manual provides essential information for the safe and efficient operation of your Altera Maresca Foldable Electric Treadmill. Please read it thoroughly before assembly and first use, and keep it for future reference. Proper use and maintenance will ensure the longevity and optimal performance of your equipment.

Vigtige sikkerhedsoplysninger

To reduce the risk of serious injury, always follow basic precautions when using this treadmill. Read all instructions before use.

• Rådfør dig med en læge, før du starter et træningsprogram, især hvis du har eksisterende helbredsproblemer.
• Hold børn og kæledyr væk fra løbebåndet under drift.
• Placer løbebåndet på en solid, plan overflade med mindst 2 meter (6.5 fod) fri plads bagved og 0.6 meter (2 fod) på hver side.
• Ensure the safety key is properly attached to both the console and your clothing before starting. The treadmill will stop if the safety key is disengaged.
• Overskrid ikke den maksimale brugervægtkapacitet for 150 kg (330 lbs).
• Brug passende sportsfodtøj og -tøj. Undgå løstsiddende tøj, der kan sætte sig fast i bevægelige dele.
• Brug ikke løbebåndet, hvis ledningen eller stikket er beskadiget, eller hvis det ikke fungerer korrekt.
• Tag løbebåndet ud af stikkontakten, når det ikke er i brug, før rengøring og før udførelse af vedligeholdelse.
• Dette løbebånd er kun beregnet til indendørs brug. Udsæt det ikke for vand eller for høj luftfugtighed.

Pakkens indhold

Before beginning assembly, carefully unpack all components and verify that all parts are present and undamaged. Refer to the assembly diagrams in the separate assembly guide (if provided) or the included components list. If any parts are missing or damaged, please contact customer service immediately.

Opsætning og montering

The Altera Maresca Treadmill requires assembly. Follow these general steps. For detailed instructions, please refer to the dedicated assembly manual.

1. Udpak komponenter: Tag forsigtigt alle dele ud af emballagen, og læg dem på en ren, plan overflade.
2. Attach Uprights: Secure the upright support frames to the base of the treadmill using the provided hardware.
3. Installer konsol: Mount the control console onto the top of the uprights, ensuring all electrical cables are properly connected and secured.
4. Fastgør alle fastgørelseselementer: Double-check that all bolts, screws, and nuts are tightened securely.
5. Position Treadmill: Move the assembled treadmill to its intended location, ensuring adequate clearance around the unit.

Betjeningsvejledning

Kontrolpanel overview

The control panel features an LCD display and various buttons for controlling your workout:

• LCD-skærm: Shows time, distance, calories burned, heart rate, speed, and incline level.
• START/PAUSE knap: Initiates or temporarily pauses the workout.
• STOP knap: Ends the workout and brings the belt to a complete stop.
• SPEED +/- Buttons: Adjusts the running belt speed (1-20 km/h).
• INCLINE +/- Buttons: Adjusts the incline level (18 levels, 2°-4°).
• PROGRAM knap: Selects from 12 pre-set workout programs.
• MODE knap: Skifter mellem visningstilstande eller indstillinger.
• AUX/USB Ports: For connecting external audio devices or charging.
• Bluetooth: For connecting to compatible mobile devices and apps.

Start af træning

1. Ensure the treadmill is plugged into a grounded 110V outlet.
2. Attach the safety key clip to your clothing and insert the safety key into its designated slot on the console. The treadmill will not operate without the safety key.
3. Step onto the side rails of the treadmill. Do not stand on the running belt when starting.
4. Tryk på STARTE button. The belt will begin moving at a low speed after a short countdown.
5. Carefully step onto the moving belt and begin walking or running.

Justering af hastighed og hældning

• Brug HASTIGHED +/- knapper til at øge eller mindske båndhastigheden.
• Brug INLINE +/- buttons to adjust the incline level. The treadmill offers 18 levels of incline, ranging from 2° to 4°.

Using Pre-set Programs

Tryk på PROGRAM button to cycle through the 12 pre-set workout programs. Each program has varying speed and incline profiles designed for different fitness goals. Follow the on-screen prompts to select and start a program.

Overvågning af puls

Grasp the pulse sensors on the handlebars with both hands to monitor your heart rate. Your heart rate will be displayed on the LCD screen.

Bluetooth-forbindelse

The treadmill supports Bluetooth connectivity. Pair your mobile device to stream music or connect to compatible fitness applications for enhanced workout tracking and control. Use the AUX or USB ports for direct audio connection or charging.

Stop en træning

Tryk på for at stoppe løbebåndet STOP button. The belt will gradually slow down and come to a complete stop. Alternatively, pulling the safety key will immediately stop the treadmill for emergency situations.

Opretholdelse

Regular maintenance is crucial for the performance and lifespan of your treadmill. Always unplug the treadmill before cleaning or performing any maintenance.

• Rensning: Tør konsollen og andre overflader af med en sprayflaske.amp en klud efter hver brug for at fjerne sved og støv. Brug ikke slibende rengøringsmidler.
• Smøring af løbebånd: Periodically check the running belt for proper lubrication. Refer to the separate maintenance guide for instructions on how to lubricate the belt, typically every few months depending on usage.
• Remspænding og justering: Inspect the running belt regularly for proper tension and alignment. Adjust if necessary according to the instructions in the maintenance guide.
• Generel inspektion: Routinely check all bolts and fasteners to ensure they are tight.

Fejlfinding

If you encounter any issues with your Altera Maresca Treadmill, refer to the following common problems and solutions:

• Løbebånd starter ikke:
  • Sørg for, at netledningen er korrekt tilsluttet en funktionel 110V-stikkontakt.
  • Kontroller, at sikkerhedsnøglen er korrekt isat i dens plads på konsollen.
  • Tjek afbryderen i dit hjem.
• Running Belt Slips or Stops:
  • The running belt may require lubrication. Refer to the maintenance section.
  • The running belt may be too loose. Adjust the belt tension according to the maintenance guide.
• Usædvanlige lyde:
  • Check for loose parts and tighten any fasteners.
  • Sørg for, at løbebåndet står på en plan overflade.
• Skærm virker ikke:
  • Kontroller alle kabelforbindelser til konsollen.
  • Sørg for, at løbebåndet er tændt.

Hvis problemerne fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

Specifikationer

Garanti og support

Garanti: This product comes with a 3-month warranty, applicable only for manufacturing defects.

For technical support, troubleshooting assistance, or warranty claims, please refer to your purchase documentation for seller contact information. Ensure you have your product model (MARESCA) and proof of purchase available when contacting support.