Genuine OEM For Mazda Front Weather-Strip KB7W-72-76XB Instruction Manual

1. Produktet er slutview

This manual provides essential information for the installation and maintenance of the Genuine OEM For Mazda Front Weather-Strip, part number KB7W-72-76XB. This component is designed to ensure a proper seal for the front of your Mazda vehicle, contributing to reduced noise, prevention of water ingress, and overall vehicle integrity.

Choosing a genuine OEM part ensures high quality and effectiveness, guaranteeing compatibility and performance as intended by the original manufacturer.

Nøglefunktioner:

• Genuine Japanese Part: Manufactured to strict quality standards in Japan.
• Præcis tilpasning: Specifically designed for Mazda Front Weather-Strip applications, part number KB7W-72-76XB.
• Holdbarhed: Constructed from high-quality materials for long-lasting performance and resistance to environmental factors.
• Seglintegritet: Ensures a tight seal to protect against water, dust, and noise intrusion.

2. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede og ubeskadigede.

• 1 x Genuine OEM For Mazda Front Weather-Strip (KB7W-72-76XB)

Figur 1: Øverst view of the Genuine OEM For Mazda Front Weather-Strip KB7W-72-76XB. This image shows the elongated, curved rubber strip designed to fit along the front of a Mazda vehicle, providing a seal.

Figur 2: Vinklet view of the Genuine OEM For Mazda Front Weather-Strip KB7W-72-76XB. This perspective highlights the profile and attachment points of the weather-strip, showing its specific contours for vehicle integration.

3. Installationsvejledning

Proper installation is crucial for the effectiveness and longevity of the weather-strip. It is recommended that installation be performed by a qualified technician. If you are performing the installation yourself, ensure you have the necessary tools and refer to your vehicle's specific service manual for detailed instructions.

Tools and Materials (Recommended):

• Værktøj til fjernelse af plastiklister
• Ren klud
• Mild cleaning solution (e.g., rubbing alcohol)
• Adhesive promoter (if specified by vehicle manufacturer)

Installationstrin:

1. Forberedelse: Ensure the vehicle is parked on a level surface and the engine is off. Open the hood or relevant access panel to expose the area where the weather-strip will be installed.
2. Remove Old Weather-Strip: Carefully remove the existing weather-strip. Use plastic trim removal tools to pry up any clips or adhesive sections without damaging the vehicle's paint or body. Note the orientation of the old strip for reference.
3. Ren overflade: Thoroughly clean the mounting surface on the vehicle. Use a clean cloth and a mild cleaning solution to remove any dirt, debris, old adhesive residue, or grease. Allow the surface to dry completely. A clean surface is essential for proper adhesion.
4. Apply Adhesive Promoter (If Needed): If your vehicle's service manual or the new weather-strip instructions specify, apply an adhesive promoter to the cleaned surface. Allow it to flash off according to the product's instructions.
5. Install New Weather-Strip: Carefully align the new Genuine OEM For Mazda Front Weather-Strip (KB7W-72-76XB) with the mounting area. Start from one end and gently press the weather-strip into place, ensuring all clips engage and the adhesive backing (if present) makes firm contact with the vehicle surface. Work your way along the entire length, ensuring a snug and even fit.
6. Secure and Verify: Once fully installed, apply firm, even pressure along the entire length of the weather-strip to ensure proper adhesion and seating. Verify that the weather-strip is securely attached and properly sealed.

Vigtig: Always refer to the specific service manual for your Mazda vehicle model for precise installation procedures and torque specifications for any fasteners involved.

4. Vedligeholdelse

Regular maintenance of your weather-strip will extend its lifespan and ensure continued effectiveness.

• Regelmæssig rengøring: Periodically clean the weather-strip with mild soap and water to remove dirt, dust, and grime. Avoid harsh chemicals or abrasive cleaners, which can damage the rubber material.
• Smøring: Apply a silicone-based lubricant specifically designed for rubber seals once or twice a year. This helps keep the rubber pliable, prevents cracking, and reduces friction, which can prolong the life of the weather-strip.
• Inspektion: Regularly inspect the weather-strip for signs of wear, cracking, tearing, or deformation. Pay attention to areas that experience frequent contact or exposure to the elements.
• Skadevurdering: If any damage is observed, consider replacing the weather-strip promptly to maintain the vehicle's seal integrity and prevent further issues.

5. Fejlfinding

This section addresses common issues related to weather-strip performance.

6. Specifikationer

7. Garantioplysninger

As this is a genuine OEM part, warranty coverage typically falls under the original equipment manufacturer's terms or the seller's policy. Please refer to your purchase receipt or contact the seller (LEV Parts) for specific warranty details regarding this product.

General return policy for this product is 30 days for refund/replacement, as per the seller's terms on Amazon. Please note that warranty terms may vary based on the point of purchase and regional regulations.

8. Kundesupport

For technical assistance, installation queries, or warranty claims, please contact the seller directly through the platform where the purchase was made. For purchases made on Amazon, you can typically find seller contact information via your order history.

Sælger: LEV Parts

When contacting support, please have your product model number (KB7W-72-76XB) and purchase details readily available.