Maxxima Horizontal LED Step Light Instruction Manual

1. Produktet er slutview

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, dampeller tørre steder.

Figur 1: Forside view of the Maxxima Horizontal LED Step Light in black finish.

2. Sikkerhedsoplysninger

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
• Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
• Sørg for, at alle elektriske forbindelser er sikre og overholder lokale forskrifter og bestemmelser.
• Installer ikke dette armatur med våde hænder eller mens du står på våde eller våde stederamp overflader.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• Modificér ikke armaturet, og brug det ikke til andre formål end det tilsigtede formål.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• Monteringsudstyr (skruer, trådmøtrikker)
• Instruktionsmanual (dette dokument)

Figur 2: Eksploderet view showing the step light components, including the faceplate and internal module.

4. Specifikationer

5. Installationsvejledning

Før du begynder: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. Forbered samledåsen: Ensure you have a standard one-gang junction box installed in the desired location.
2. Tilslut ledninger:
   • Tilslut sort ledningen fra armaturet til varmt (black) wire from the junction box.
   • Tilslut hvid ledningen fra armaturet til neutral (white) wire from the junction box.
   • Tilslut grøn ledningen fra armaturet til jord (green or bare copper) wire from the junction box.
   Fastgør alle forbindelser med de medfølgende trådmøtrikker.
3. Vælg farvetemperatur (CCT): Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Attach the Faceplate: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. Gendan strøm: Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

Installationsvideoguide

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. Betjeningsvejledning

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. Vedligeholdelse

The LED step light requires minimal maintenance. To clean the fixture:

• Ensure power is OFF before cleaning.
• Tør den ydre overflade af med en blød,amp klæde.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

8. Fejlfinding

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• Lyset tænder ikke:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Sørg for, at armaturet modtager den korrekte lydstyrketage (120 V vekselstrøm).
• Lyset flimrer eller dæmpes:
  • Tjek for løse ledningsforbindelser.
  • Sørg for, at armaturet ikke er tilsluttet en lysdæmper, medmindre det er udtrykkeligt godkendt til dæmpning (denne model er ikke specificeret som dæmpbar).
  • Kontroller en stabil strømforsyning.
• Forkert farvetemperatur:
  • Sluk for strømmen til armaturet.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. Garanti og support

This Maxxima Horizontal LED Step Light is covered by a 3 års garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

Kontaktoplysninger: Refer to the Maxxima webwebstedet eller din købsdokumentation for at få de seneste kontaktoplysninger.