1. Introduktion
Thank you for choosing Lomotech Multicolor Icicle Lights. This manual provides essential information for the safe and effective use of your new lighting product. These 32-foot icicle lights are designed for both indoor and outdoor decorative purposes, featuring multiple lighting modes, a timer function, and a connectable design for extended coverage.
2. Produktfunktioner
- Længde: 32 feet (lighted portion) with a 16.4-foot lead cable.
- Tilslutbart design: Up to 3 sets can be connected end-to-end for larger installations.
- 8 lystilstande: Includes Combination, In Wave, Sequential, Slo-Glo, Chasing/Blitz, Langsom udtoning, Glimt/Blitz og Konstant lys.
- Hukommelsesfunktion: Built-in chip retains the last selected mode setting after power off.
- Timer funktion: Activates a 6-hour on, 18-hour off cycle.
- Vandtæt vurdering: IP44 for both lights and plug, suitable for outdoor use.
- Lyskilde: Energy-efficient LED.
- Dråber: 40 drops with varying lengths.
3. Sikkerhedsoplysninger
- Sørg for, at strømkilden passer til produktets lydstyrketage krav.
- Do not attempt to modify or repair the lights or adapter. Contact qualified personnel for service.
- Avoid placing lights near heat sources or flammable materials.
- Always unplug the lights from the power outlet before installation, removal, or maintenance.
- Do not secure the wiring with staples or nails.
- Hold børn og kæledyr væk fra lysene under drift.
4. Pakkens indhold
- 1 x Lomotech 32Ft Multicolor Icicle Light Set
- 1 x strømadapter med controller
5. Opsætningsvejledning
- Pakker ud: Carefully remove the icicle lights from their packaging. Untangle the strands gently to avoid damage.
- Placering: Determine the desired location for installation. These lights are suitable for eaves, windows, fences, or other outdoor structures. Ensure the lead cable length (16.4 ft) is sufficient to reach a power outlet.
- Installation: Secure the main string of lights using appropriate clips or ties (not included) to your chosen surface. Allow the icicle drops to hang freely.
- Connecting Multiple Sets (Optional): If connecting multiple sets, align the male and female connectors at the end of each light string and push them firmly together. Ensure the connection is secure and sealed if used outdoors. Up to 3 sets can be connected.
- Strømtilslutning: Sæt strømadapteren i en almindelig stikkontakt.


6. Betjeningsvejledning
6.1. Ændring af lystilstande
The power adapter features a button to cycle through the 8 available lighting modes. Press the button repeatedly to switch between modes:
- Kombination
- I bølge
- Sekventiel
- Slo-Glo
- Chasing/Blitz
- Langsom fade
- Blink/Blitz
- Konstant på
The built-in memory chip will save your last selected mode, so it will resume that mode when powered on again.
6.2. Activating the Timer Function
To activate the timer, locate the button on the power adapter. Press and hold this button for approximately 3 seconds until the timer indicator light illuminates (typically a green light). Once activated, the lights will automatically turn on for 6 hours and then turn off for 18 hours, repeating this cycle daily.
To deactivate the timer, press and hold the button again until the timer indicator light turns off.


7. Vedligeholdelse
- Rensning: Disconnect the lights from power before cleaning. Wipe gently with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Opbevaring: When not in use, carefully coil the lights and store them in a cool, dry place, away from direct sunlight and moisture. Original packaging is recommended for storage to prevent tangling and damage.
- Inspektion: Periodically inspect the lights, cable, and adapter for any signs of wear, damage, or loose connections. Discontinue use if any damage is found.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. | Ingen strøm, løs forbindelse eller defekt adapter. | Ensure the adapter is securely plugged into a working outlet. Check all connections between light sets. Test the outlet with another device. |
| Timerfunktionen fungerer ikke som forventet. | Timeren er ikke aktiveret eller er aktiveret forkert. | Press and hold the button on the adapter for 3 seconds until the timer indicator light is on. If already on, try deactivating and reactivating the timer. |
| Some lights are not illuminating. | Damaged LED or wiring. | Inspect the affected section for visible damage. If a section is damaged, discontinue use and contact support. |
| Lysene flimrer eller dæmpes. | Ustabil strømforsyning eller løs forbindelse. | Ensure the power outlet is stable. Check all connections for tightness. |
9. Specifikationer
| Specifikation | Detalje |
|---|---|
| Modelnummer | SSL0200-I-24V |
| Mærke | Lomotech |
| Farve | Flerfarvet |
| Oplyst længde | 32 fod |
| Bly kabellængde | 16.4 fod |
| Antal dråber | 40 |
| Space Between Drops | 9.8 tommer |
| Plads mellem LED'er | 3.9 tommer |
| Drop Lengths | 15.7 in / 23.6 in (alternating) |
| Lyskildetype | LED |
| Strømkilde | Elektrisk med ledning |
| Indendørs/Udendørs brug | Udendørs |
| Vandtæt vurdering | IP44 |
| Materiale | Kobber |
| Kontrolmetode | Touch (via adapter button) |
| Varens vægt | 1.1 pund (0.5 kilo) |
| Fabrikant | LINHAI SHUNSHENG DECORATIVE LIGHTING CO.,LTD |

10. Garanti og support
For warranty information or technical support, please refer to the product packaging or contact Lomotech customer service directly. Keep your purchase receipt for any warranty claims.