Instruktionsmanual

Indledning

This manual provides essential information for the setup, operation, and maintenance of your new Tucus replacement remote control. This remote is designed to be compatible with various JVC Micro COMPACT COMPONENT Stereo Systems, including models RM-SUXQ30UW, RM-SUXQ30US, UX-Q30S, UX-Q30B, UX-Q30P, and UX-Q30W. While it is a replacement remote and not the original device's remote, common functions are expected to operate normally. Please review this guide thoroughly to ensure proper use and longevity of your remote control.

Opsætning

1. Batteriinstallation

The remote control requires two (2) AA batteries (not included) for operation. Follow these steps to install them:

1. Find batterirummet på bagsiden af ​​fjernbetjeningen.
2. Skub batteridækslet nedad eller udad for at åbne det.
3. Isæt to AA-batterier, og sørg for, at de positive (+) og negative (-) poler er justeret korrekt med markeringerne inde i batterirummet.
4. Skub batteridækslet tilbage på plads, indtil det klikker sikkert.

Figure 1: Back of the remote control showing the battery compartment cover.

Figure 2: Battery compartment with cover removed, ready for battery insertion.

2. Førstegangsbrug

Once batteries are installed, the remote control is ready for use. Point the remote directly at your JVC Micro COMPACT COMPONENT Stereo System. No additional programming is typically required for this replacement remote for the listed compatible models.

Betjeningsvejledning

This remote control provides access to the primary functions of your JVC stereo system. Below is a general overview of common button functions. Please note that while the functionality is guaranteed, the exact button layout may differ slightly from your original remote.

Figur 3: Forside view af fjernbetjeningen med knaplayout.

Nøglefunktioner:

• STANDBY/ON: Powers the stereo system on or off.
• SKÆRM: Changes or shows display information.
• UR/TIMER: Accesses clock and timer settings.
• SOVE: Sets a sleep timer for automatic power off.
• Number Buttons (0-9, +10): Direct input for track numbers, radio frequencies, etc.
• BASS / TREBLE: Justerer bas- og diskantniveauer.
• Navigation (UP, DOWN, LEFT, RIGHT, SET): Bruges til menunavigation og valg.
• Playback Controls (PLAY/PAUSE, STOP, FAST FORWARD, REWIND, SKIP): Styrer medieafspilning.
• Source Selection (CD, TAPE, FM/AM, AUX/MD): Selects the audio input source.
• FM MODE / REV.MODE: Toggles FM stereo/mono or tape reverse mode.
• AUTO PRESET: Automatically scans and saves radio stations.
• PRGM / RANDOM / REPEAT: Controls program, random, and repeat playback modes.
• PTY SEARCH / PTY SELECT: For Program Type search and selection on radio.
• DISPLAY / TA/News / Info: Provides additional display information or traffic/news announcements.
• AHB PRO: Aktiverer eller deaktiverer Active Hyper-Bass PRO.
• LYDSTYRKE (+/-): Justerer masterlydstyrkeniveauet.

For specific advanced functions, please refer to the original instruction manual of your JVC Micro COMPACT COMPONENT Stereo System.

Opretholdelse

Rengøring af fjernbetjeningen

To maintain the remote control's appearance and functionality, clean it regularly:

• Tør overfladen af ​​med en blød, tør klud.
• Til genstridigt snavs, let dampRengør kluden med vand eller et mildt, ikke-slibende rengøringsmiddel. Spray ikke rengøringsmiddel direkte på fjernbetjeningen.
• Undgå at bruge skrappe kemikalier, opløsningsmidler eller slibende rengøringssvampe, da disse kan beskadige fjernbetjeningens overflade eller interne komponenter.

Udskiftning af batteri

Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new ones of the same type (AA). Do not mix old and new batteries, or different types of batteries.

Opbevaring

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.

Fejlfinding

• Fjernbetjeningen svarer ikke:
  • Kontroller, om batterierne er isat korrekt med den korrekte polaritet (+/-).
  • Udskift gamle batterier med nye.
  • Ensure there are no obstructions between the remote control and the stereo system's infrared receiver.
  • Sørg for at du er inden for fjernbetjeningens effektive rækkevidde.
• Some buttons not working or unexpected behavior:
  • This remote is a replacement and while common functions are supported, the button layout or specific advanced functions might not perfectly match your original remote. Refer to the button layout image in the Operating Instructions section.
  • Ensure the stereo system is powered on and set to the correct input source.
• Remote appears damaged:
  • If the remote has been dropped or exposed to liquids, internal damage may have occurred. In such cases, replacement may be necessary.

Specifikationer

Garantioplysninger

This product comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the remote control functions as intended for compatible models. Please retain your proof of purchase for any warranty claims.

Kundesupport

If you have any questions regarding the compatibility or functionality of this remote control, or if your specific device model is not listed, please contact the seller directly for assistance. The seller stocks a wide range of remote controls and parts and can confirm suitability for your needs.

For general inquiries or to provide feedback, please refer to the contact information provided by your retailer or the seller.