GOOLOO GT4000S Jump Starter and GT150 Tire Inflator Instruction Manual

1. Introduktion

This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.

GOOLOO GT4000S Jump Starter and GT150 Tire Inflator

Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).

2. Vigtige sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden og køretøjet:

Læs alle instruktioner før brug.
Brug ikke jumpstarteren, hvis kablerne eller koblingerne eramps er beskadiget.
Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
Do not jump start vehicles with battery voltage andet end 12V.
Opbevares utilgængeligt for børn.
Do not expose to rain or extreme temperatures.
Do not use the tire inflator for purposes other than inflating tires or compatible items.
Avoid over-inflating tires; always check recommended PSI.

3. Produktet er slutview

3.1 GOOLOO GT4000S Jump Starter

Peak Current: 4000A
Motorkompatibilitet: Op til 12.0 l benzin, 10.0 l diesel
Opladning: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
Produktion: Up to 100W for charging MacBooks and other laptops (Type-C port only).
Batterilevetid: Up to 60 jumpstarts on a single full charge.
Kompatibilitet: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.

Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.

3.2 GOOLOO GT150 Tire Inflator

Max tryk: 150 PSI
Inflationshastighed: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
Funktioner: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
Kompatibilitet: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.

GOOLOO GT150 Tire Inflator inflating a car tire

Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.

4. Opsætning og opladning

4.1 Charging the GT4000S Jump Starter

Connect the provided USB-C cable to the jump starter's Type-C input port.
Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
The display will show the charging wattage og batteriprocenttage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.

GOOLOO GT4000S Jump Starter charging in a car

Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.

4.2 Charging the GT150 Tire Inflator

The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.

GOOLOO GT150 Tire Inflator charging a smartphone

Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.

5. Betjeningsvejledning

5.1 Using the GT4000S Jump Starter

Ensure the jump starter is sufficiently charged (above 20%).
Tilslut startkablet clamps til jumpstarterenheden.
Sæt den røde clamp til den positive (+) pol på bilbatteriet og den sorte terminalamp til den negative (-) terminal.
Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
Start din bils motor inden for 30 sekunder.
Når køretøjet starter, skal du straks fjerne klampen.amps fra bilbatteriet, og frakobl dem derefter fra jumpstarteren.

Video: Official GOOLOO demonstration on how to jump start a car using a GOOLOO jump starter. This video illustrates the connection process and starting the vehicle.

5.2 Using the GT150 Tire Inflator

Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
Turn on the GT150. The LED screen will display the current tire pressure.
Brug knapperne '+' og '-' til at indstille det ønskede måltryk.
Press the power button to start inflation. The inflator will automatically stop once the target pressure is reached.
Disconnect the air hose and store the unit.

GOOLOO GT150 Tire Inflator displaying preset and real-time pressure

Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.

6. Vedligeholdelse og opbevaring

Store the units in a cool, dry place away from direct sunlight and moisture.
Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
Clean the units with a dry, soft cloth. Do not use harsh chemicals.

7. Fejlfinding

Fælles problemer og løsninger
Problem	Mulig årsag	Løsning
Jump Starter not turning on	Low battery or faulty unit	Charge the unit fully. If issue persists, contact support.
"READY" not displayed (GT4000S)	Incorrect connection or battery too low	Tjek klamp connections. Use "BOOST" function for completely dead batteries.
Tire Inflator not working (GT150)	Low battery, hose not connected properly	Charge the unit. Ensure hose is securely attached to tire valve.

8. Specifikationer