GOOLOO GP4000 Jump Starter & GT150 Tire Inflator User Manual

1. Introduktion

Tak for købetasing the GOOLOO GP4000 Jump Starter and GT150 Tire Inflator. This comprehensive device combines a powerful car jump starter with a versatile portable air compressor, designed to provide reliable emergency assistance and convenient tire maintenance for a wide range of vehicles and inflatable items. Please read this manual thoroughly before use to ensure proper operation and safety.

Image: The GOOLOO GP4000 Jump Starter (right) and GT150 Tire Inflator (left), showcasinbegge enheder er inkluderet i pakken.

2. Sikkerhedsoplysninger

Always observe the following safety precautions to prevent injury or damage to the devices:

• Udsæt ikke enhederne for ekstreme temperaturer, direkte sollys eller fugt.
• Opbevares utilgængeligt for børn.
• Sørg for tilstrækkelig ventilation under brug og opladning.
• Enhederne må ikke skilles ad eller modificeres.
• For jump starting, connect the red clamp til den positive (+) terminal og den sorte clamp to the negative (-) terminal. Reverse polarity can cause damage.
• Avoid over-inflating tires or other items. Always refer to the manufacturer's recommended pressure.
• Hvis batteriet clamps touch each other, a spark may occur. Avoid this contact.
• Brug ikke jumpstarteren, hvis batteriet er løbet tør.amps eller kabler er beskadigede.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

• GOOLOO GP4000 Jump Starter Unit
• GOOLOO GT150 Tire Inflator Unit
• Smarte jumperkabler (med clamps)
• USB-C ladekabel
• Various Air Nozzles/Adapters for GT150
• Brugermanual
• Opbevaringsetui (kan variere afhængigt af pakken)

4. Produktfunktioner og komponenter

4.1 GOOLOO GP4000 Jump Starter

The GP4000 is a powerful and versatile jump starter designed for various vehicles.

• Peak Current: 4000 Amps
• Motorkompatibilitet: All gasoline engines, up to 10.0L diesel engines.
• Udgangsporte: Dual USB charging ports (one supports fast charging), USB Type-C (5V/3A).
• Input port: USB Type-C for recharging the unit.
• Sikkerhedsfunktioner: Reverse polarity protection, over-current protection, short-circuit protection, over-voltage protection, over-charge protection.
• Yderligere funktioner: LED flashlight with multiple modes (steady, strobe, SOS).

Billede: Detaljeret view of the GOOLOO GP4000 Jump Starter, highlighting its LED indicator, power button, Type-C input/output, quick charging output, and 15V/10A output port.

Image: The GOOLOO GP4000 Jump Starter demonstrating its capacity to charge multiple devices like smartphones and tablets, suitable for outdoor use.

4.2 GOOLOO GT150 Tire Inflator

The GT150 is a compact and efficient portable air compressor.

• Max tryk: 150 PSI
• Inflationstilstande: 5 preset modes (car, motorcycle, bicycle, ball, customize).
• Trykenheder: PSI, KPA, BAR, KG/CM².
• Vise: Ultra-bright LED screen for real-time and preset pressure values.
• Automatisk sluk: Automatically stops when preset pressure is reached.
• Portabilitet: Cordless design, easy to carry.

Image: The GOOLOO GT150 Tire Inflator displaying its large LED screen, which provides clear visibility of pressure readings even in bright conditions.

5. Opsætning og opladning

5.1 Charging the GP4000 Jump Starter

Before first use, fully charge the GP4000. It is recommended to recharge the unit after each use or every 3-6 months if not used frequently.

1. Connect the USB-C charging cable to the Type-C input port on the GP4000.
2. Tilslut den anden ende af kablet til en USB-vægadapter (medfølger ikke) eller en USB-port med strømforsyning.
3. The LED indicators will show the charging progress. All LEDs will be solid when fully charged.

5.2 Charging the GT150 Tire Inflator

The GT150 also requires charging before use. Use the provided USB-C cable.

1. Connect the USB-C charging cable to the charging port on the GT150.
2. Connect the other end to a USB wall adapter or powered USB port.
3. Displayet vil vise opladningsstatus.

6. Betjeningsvejledning

6.1 Using the GP4000 Jump Starter

Follow these steps to jump start a vehicle:

1. Ensure the GP4000 is sufficiently charged.
2. Connect the blue plug of the smart jumper cables into the jump start port on the GP4000.
3. Tilslut rød clamp til køretøjets positive (+) batteripol.
4. Tilslut sort clamp til køretøjets negative (-) batteripol.
5. Once connected, the indicator light on the smart cable will turn green (or solid green if using BOOST function). If the light is red or flashing, check connections.
6. Start køretøjets motor.
7. Once the vehicle starts, immediately remove the jumper cables from the GP4000, then disconnect the black clamp, efterfulgt af den røde clamp fra køretøjets batteri.

Note on BOOST Function: If the vehicle battery is extremely low or completely dead, the smart cable may not detect it. In this case, press and hold the "BOOST" button on the smart cable for 3 seconds until the indicator light turns solid green. This bypasses safety checks and forces the jump start. Use with caution.

Image: The GOOLOO GP4000 Jump Starter connected to a car battery, demonstrating the proper setup for jump starting a vehicle.

Image: A comparison highlighting the robust, copper-material clamps of the GOOLOO jump starter against other types, emphasizing durability and reliability.

6.2 Using the GT150 Tire Inflator

Inflate tires or other items using the GT150:

1. Ensure the GT150 is sufficiently charged.
2. Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
3. Turn on the GT150. The current tire pressure will be displayed.
4. Press the 'M' button to cycle through the 5 preset inflation modes (car, motorcycle, bicycle, ball, custom).
5. Brug knapperne '+' og '-' til at justere det ønskede måltryk.
6. Press the power button to start inflation. The inflator will automatically stop when the target pressure is reached.
7. Frakobl luftslangen fra dækventilen.

Ændring af enheder: Press the unit button (often labeled with a symbol like a gear or 'U') to switch between PSI, KPA, BAR, and KG/CM².

Image: The GOOLOO GT150 Tire Inflator in use, demonstrating its cordless operation while inflating a car tire.

Image: The GOOLOO GT150 Tire Inflator showing its display with both real-time and preset pressure values, indicating its auto shut-off feature.

Image: The GOOLOO GT150 Tire Inflator positioned with various items it can inflate, including car tires, motorcycle tires, bicycle tires, and balls, illustrating its versatility.

7. Vedligeholdelse

• Rensning: Tør enhederne af med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the devices in a cool, dry place, away from direct sunlight and moisture.
• Batteripleje: For optimal battery life, fully charge both units every 3-6 months, even if not in use.
• Kabelinspektion: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

GOOLOO products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your GP4000 Jump Starter or GT150 Tire Inflator, please contact GOOLOO customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.

For more information, visit the official GOOLOO store: GOOLOO Store on Amazon