BONTEC Full Motion TV Wall Mount Instruction Manual

1. Introduktion

Thank you for choosing the BONTEC Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed for 26-60 inch LED LCD Flat & Curved TVs with a maximum weight capacity of 88 lbs (40 kgs) and VESA compatibility up to 400x400mm.

2. Sikkerhedsoplysninger

• Sørg for, at alle komponenter er til stede og ubeskadigede før installation. Må ikke anvendes, hvis nogen af ​​delene mangler eller er defekte.
• This product is intended for installation on solid concrete walls, brick walls, or wood stud walls. MONTER IKKE KUN PÅ GIPSVÆGG.
• Verify the wall structure can safely support the combined weight of the mount and your TV. Consult a qualified professional if unsure.
• Do not exceed the maximum weight capacity of 88 lbs (40 kgs).
• Brug passende sikkerhedsudstyr under installationen, herunder øjenbeskyttelse.
• Hold børn og kæledyr væk under installationen.
• Tighten all screws firmly but do not overtighten to avoid stripping or damaging components.

3. Pakkens indhold

Please check the package to ensure all parts are included:

Image: Included hardware for the BONTEC TV Wall Mount.

• Vægmontering
• Concrete Anchors (x3)
• Lag Bolts (x3)
• Washers (φ6mm x3)
• Skruenøgle
• TV Mounting Screws: M4*12mm (x4), M4*30mm (x4), M6*15mm (x4), M6*30mm (x4), M8*20mm (x4), M8*50mm (x4)
• Spacers: D8*5mm (x8), D8*10mm (x8)
• Square Washers (M4/M6/M8)

4. Specifikationer

Image: Compatibility and VESA standards for the mount.

5. Opsætning og installation

5.1 Kontrol før installation

• Identify your wall type: Wood Studs, Concrete, or Brick.
• Gather necessary tools: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver.
• Bestem den ønskede højde og placering af dit tv.

Image: Applicable wall types for installation.

5.2 Montering af beslag på tv'et

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade.
2. Identificer VESA-monteringshullerne på bagsiden af ​​dit tv.
3. Select the correct screws (M4, M6, or M8) and spacers that fit your TV's mounting holes. Use spacers if the TV back is uneven or if screws are too long.
4. Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure they are securely fastened and level.

5.3 Montering af vægpladen

1. Mark the desired drilling locations on the wall using the wall plate as a template. Use a level to ensure accuracy.
2. Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the lag bolts/anchors used.
3. For concrete/brick walls: Insert the concrete anchors into the drilled holes.
4. Align the wall plate with the drilled holes and secure it to the wall using the lag bolts and washers. Tighten firmly.

Image: The BONTEC Full Motion TV Wall Mount.

5.4 Ophængning af tv'et

1. Løft forsigtigt tv'et op med de medfølgende beslag, og hægt dem fast på vægpladen.
2. Sørg for, at tv'et er sikkert monteret på vægpladen.
3. Tighten any safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement.

Image: Easy installation process.

6. Betjeningsvejledning

The BONTEC Full Motion TV Wall Mount offers various adjustments for optimal viewoplevelse:

• Drejelig: The mount allows for a swivel range of up to ±90 degrees, enabling you to adjust the TV's horizontal viewing angle. Gently push or pull the TV to the desired position.
• Vip: You can tilt the TV from +5 degrees (upward) to -10 degrees (downward) to reduce glare and optimize vertical viewLøsn hældningsjusteringsknapperne, indstil den ønskede vinkel, og spænd dem igen.
• Niveaujustering: If your TV appears slightly unlevel after installation, you can adjust it by ±3 degrees. Loosen the leveling screws, adjust the TV, and re-tighten.
• Udvidelse: The mount can extend from a minimum of 3.15 inches to a maximum of 19.7 inches from the wall, providing flexibility for viewing and accessing cables.

Image: Swivel, Tilt, and Level adjustments for enhanced viewing.

Image: Extended distance from the wall.

7. Vedligeholdelse

• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre.
• Rengør holderen med en blød, tør klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
• Do not apply lubricants to the moving parts unless specifically instructed by the manufacturer.

8. Fejlfinding

• TV'et er ikke i vater: Loosen the leveling screws, adjust the TV to the desired level, and re-tighten the screws.
• Beslaget føles løst: Check all wall plate and TV bracket screws. Ensure they are tightened securely. If mounted on wood studs, verify the studs were properly located. If on concrete/brick, ensure anchors are fully seated.
• Difficulty adjusting swivel/tilt: Ensure no cables are snagged or obstructing movement. Check if adjustment knobs/screws are too tight; loosen slightly if necessary.
• Manglende dele: Refer to the 'Package Contents' section. If parts are genuinely missing, contact BONTEC customer support.

9. Garanti og support

BONTEC products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official BONTEC website. If you encounter any issues or require technical assistance, please contact BONTEC customer support through the following channels:

• Webwebsted: Visit the BONTEC official webwebsted for ofte stillede spørgsmål og kontaktoplysninger til support.
• E-mail: Refer to your product packaging or warranty card for customer service email address.

Please have your model number (MG400-US-FBA) and purchase details ready when contacting support.