Minetom BL-HW02

Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector User Manual

Model: BL-HW02

1. Introduktion

Tak for købetasing the Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector. This device is designed to create dynamic and decorative light displays for various occasions, both indoors and outdoors. Featuring multiple color combinations, motion effects, and remote control operation, it offers a versatile lighting solution. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Sikkerhedsoplysninger

  • Øjensikkerhed: Do not look directly into the laser light beam. Direct exposure to laser light can cause eye damage.
  • Strømkilde: Sørg for, at strømkilden matcher voltage requirements specified on the product label. Use only the provided power adapter.
  • Udendørs brug: While the projector is IP65 waterproof, ensure the power adapter and connections are protected from water exposure.
  • Installation: Install the projector securely to prevent it from falling or being dislodged by wind or other environmental factors.
  • Børn og kæledyr: Hold enheden utilgængeligt for børn og kæledyr for at forhindre utilsigtet skade eller personskade.
  • Temperatur: Do not operate the device outside its specified temperature range (-30°F to 104°F).
  • Opretholdelse: Forsøg ikke at åbne eller reparere enheden selv. Overlad al service til kvalificeret personale.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • Minetom RGB Christmas Laser Light Projector
  • RF fjernbetjening
  • Jordpæl
  • Rund base
  • Power Adapter (with 16.4ft extension cord)
  • Brugervejledning (dette dokument)

4. Opsætning

4.1 Valg af installationsmetode

The projector offers three installation options: ground-mounted, wall-mounted, or placed on a flat surface.

Minetom laser light projector showing three installation methods: wall-mounted, ground-mounted, and placed on a flat surface.

Image: The Minetom laser light projector can be installed in three ways: wall-mounted, ground-mounted, or placed on a flat surface using the included accessories.

  1. Ground-Mounted: Attach the ground stake to the projector. Insert the stake firmly into soft ground in your desired outdoor location.
  2. Vægmonteret: Attach the round base to the projector. Secure the base to a wall using appropriate screws (not included) for a stable installation.
  3. Placed on Plane: Attach the round base to the projector. Place the projector on any stable, flat surface indoors or outdoors.

4.2 Strømtilslutning

  • Connect the projector to the provided power adapter.
  • Use the 16.4ft extension cord to reach a suitable outdoor power outlet.
  • Sørg for, at alle forbindelser er sikre og beskyttet mod fugt.
  • Sæt strømadapteren i en jordet stikkontakt.

5. Betjeningsvejledning

Once powered on, the projector will begin its default light show. Use the RF remote control to customize the display.

5.1 Fjernbetjeningsfunktioner

The RF remote control allows you to manage various settings from a distance. Ensure 2*AAA batteries (not included) are installed in the remote.

Diagram of the RF remote control for the Minetom laser light projector, showing buttons for power, timers, color selection, motion, and strobe effects.

Image: RF Remote Control layout with functions for each button.

Fjernbetjeningsknapfunktioner
KnapFungere
ON/OFFTænder eller slukker for projektoren.
2H/4H/6HSets the timer for 2, 4, or 6 hours.
(H) RestoreRestores to default timing (6 hours on, 18 hours off).
Farve cyklusCycles through Green, Blue, Red-Green, Blue-Green, Red-Blue, Red-Green-Blue, and Red-Green-Blue cycle.
ÅndedrætstilstandActivates a slow fade-in/fade-out effect.
Jumping ModeActivates a rapid color change effect.
S0 (Static)Sets the light display to static (no motion).
S- / S+Adjusts rotation speed (S- for slow, S+ for fast).
R/G/BSelects Red, Green, or Blue light individually.
R/G/B BreathingActivates breathing mode for individual Red, Green, or Blue colors.
R/G/B StrobeActivates strobe mode for individual Red, Green, or Blue colors. Press sequentially to adjust speed (Slow, Medium, Fast, Stop).
R/G/B SteadySets individual Red, Green, or Blue colors to steady (non-flashing).

5.2 farvekombinationer

The projector supports various color combinations to create diverse effects.

Seven different color combinations displayed by the Minetom laser light projector: Red, Green, Blue, Red Green, Red Blue, Green Blue, and Red Green Blue.

Billede: Eksamples of the 7 available color combinations.

  • Rød
  • Grøn
  • Blå
  • Rød Grøn
  • Rød Blå
  • Grøn Blå
  • Rød Grøn Blå

6. IP65 vandtæthedsklassificering

The projector body is designed with an IP65 waterproof rating, ensuring reliable performance in various weather conditions such as snow, rain, dust, and intense sunlight. It is cold-proof, operating effectively from -30°F to 104°F.

Minetom laser light projector operating outdoors in both rain and snow, demonstrating its IP65 waterproof and cold-proof capabilities.

Image: The projector operating in rainy and snowy conditions, highlighting its IP65 waterproof and cold-proof features.

7. Coverage Area

The projector can cover a significant area, illuminating indoor ceilings, walls, or outdoor walls, gardens, lawns, trees, and rooftops. From a distance of 32.8 feet, it can cover approximately 3229.17 square feet.

Diagram showing the Minetom laser light projector's coverage area increasing with distance, from 226 sq ft at 10 ft to 3541 sq ft at 40 ft.

Image: Coverage area chart illustrating how the projected area expands with increased distance from the surface.

8. Vedligeholdelse

  • Rensning: Gently wipe the projector lens and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Opbevaring: Når projektoren ikke er i brug, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
  • Kabelinspektion: Kontrollér regelmæssigt netledningen og adapteren for tegn på skader. Stop brugen, hvis der findes skader.

9. Fejlfinding

Fælles problemer og løsninger
ProblemLøsning
Projektoren tænder ikke.
  • Sørg for, at strømadapteren er sat ordentligt i en stikkontakt, der virker.
  • Kontroller, om batterierne i fjernbetjeningen er korrekt isat og ikke er opbrugt.
  • Press the ON/OFF button on the remote.
Fjernbetjeningen reagerer ikke.
  • Replace the remote control batteries (2*AAA, not included).
  • Sørg for, at der ikke er nogen forhindringer mellem fjernbetjeningen og projektoren.
  • Confirm you are within the remote's operating range.
Lysudbyttet er svagt eller ujævnt.
  • Rengør projektorlinsen, hvis den ser snavset ud.
  • Ensure the projector is not operating in extreme temperatures outside its specified range.
Multiple projectors interfere with each other.
  • This can occur with multiple RF remote-controlled devices. Try to operate one projector at a time, or position them further apart.

10. Specifikationer

FeatureDetalje
ModelnummerBL-HW02
MærkeMinetom
FarveRød Grøn Blå
MaterialePlast
Finish TypeProjektor
LyskildetypeLysdiode
StrømkildeElektrisk med ledning
MonteringstypeGulvmontering, vægmontering
Produktdimensioner2.75 cm L x 2.75 cm B x 11.02 cm H
Varens vægt14 ounce
Strålevinkel120 grader
Vandtæt vurderingIP65
Driftstemperatur-30°F til 104°F
Coverage Area (approx.)3229.17 sq ft at 32.8 ft distance

11. Garanti og support

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Minetom webwebstedet. Behold din købskvittering som købsbevis.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.