ANGELS HORN Vinyl Record Player Turntable

Indledning

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ANGELS HORN AT-3600L Vinyl Record Player Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Figure 1: ANGELS HORN AT-3600L Vinyl Record Player Turntable (Brown finish)

Opsætning

1. Udpakning og komponenter

Fjern forsigtigt alle komponenter fra emballagen. Sørg for, at alle anførte dele er til stede:

• Pladespiller enhed
• Støvdæksel
• Platter
• Kør bælte
• Modvægt
• Anti-skate vægt
• Strømadapter
• RCA-kabel
• Filtmåtte
• AT-3600L Cartridge (pre-installed)

2. Samling og indledende opsætning

Follow these steps to assemble and prepare your turntable for first use:

1. Placer fadet: Placer forsigtigt pladen på pladespillerens midterste spindel.
2. Installer drivremmen:

   Locate the drive belt and carefully stretch it around the inner rim of the platter and around the motor pulley. Ensure the belt is not twisted.

   Video 1: AH1 Installation video (Seller). This video demonstrates the installation of the drive belt and other components.

3. Placer filtmåtten: Lay the felt mat on top of the platter.
4. Installer modvægten: Slide the counterweight onto the rear of the tonearm. Rotate it until the tonearm is balanced and floats horizontally. Then, adjust the tracking force according to the cartridge specifications (typically 3.5g for AT-3600L).
   

   Figure 2: Close-up of the tonearm and counterweight adjustment. Proper adjustment ensures optimal tracking and sound quality.

5. Attach the Anti-skate Weight: Loop the anti-skate weight string over the anti-skate post. This helps prevent the tonearm from drifting inwards.
6. Installer støvdækslet: Fastgør forsigtigt støvdækslet til hængslerne bag på pladespilleren.
7. Tilslut strøm: Plug the power adapter into the DC 12V input on the rear of the turntable and then into a wall outlet.

Betjeningsvejledning

1. Afspilning af en plade

1. Tænd: Drej afbryderen til ON -positionen.
2. Vælg hastighed: Choose the appropriate speed (33 1/3 or 45 RPM) using the speed selector switch.
   

   Figure 3: The turntable features a belt drive system and supports 33 1/3 and 45 RPM speeds.

3. Stedrekord: Place your vinyl record on the felt mat.
4. Adjust Pitch (Optional): Use the Pitch control knob to fine-tune the playback speed if needed.
   

   Figure 4: The pitch control allows for precise adjustment of the spin rate for optimal audio playback.

5. Nederste tonearm: Gently lift the tonearm using the cueing lever and position it over the desired track. Slowly lower the tonearm onto the record using the cueing lever.
6. Nyde: The music will begin to play.
7. Stop afspilning: At the end of the record, the turntable will automatically stop spinning after approximately 3 minutes. Manually lift the tonearm using the cueing lever and return it to its rest. Turn the power switch to OFF.

2. Wireless Connectivity (Bluetooth Output)

The turntable features built-in Bluetooth 5.3 for wireless audio output.

• Ensure your Bluetooth speaker, soundbar, or headphones are in pairing mode.
• The turntable will automatically search for and connect to nearby Bluetooth devices.
• Once connected, audio from the record player will stream wirelessly to your device.

Figure 5: Enjoy your vinyl collection with the convenience of Bluetooth 5.3 wireless output to headphones or speakers.

Note: This record player does not support Bluetooth input, meaning you cannot connect a phone or other device to play through the turntable's internal system (if any).

3. Wired Connections (RCA Output)

For wired connections, use the RCA (R&L) jacks on the rear panel.

• Connect the RCA cable from the turntable's RCA (R&L) jacks to your external amplifier eller drevne højttalere.
• Use the Phono-Line Out Switch to select between PHONO (for external phono preamps) or LINE (for built-in phono preamp).

Figure 6: Rear panel showing RCA (R&L) Jacks, Phono-Line Out Switch, and Bluetooth Output Signal indicator.

Opretholdelse

• Støvdæksel: Always keep the dust cover closed when the turntable is not in use to prevent dust accumulation on the platter and tonearm.
• Rensning: Use a soft, dry cloth to clean the turntable's surface. For records, use a dedicated record brush to remove dust before playback.
• Styluspleje: Periodically clean the stylus with a soft brush designed for stylus cleaning, brushing from back to front.
• Bælteinspektion: Check the drive belt periodically for wear or stretching. Replace if necessary to maintain consistent playback speed.

Fejlfinding

Specifikationer

• Mærke: ENGLEHORN
• Model: AT-3600L
• Forbindelse teknologi: Bluetooth 5.3, RCA (R&L)
• Maksimal rotationshastighed: 33 1/3 RPM, 45 RPM
• Drevtype: Bæltdrev
• Speciel funktion: Manual Belt Drive, Pitch Control, Built-in Phono Preamp, Adjustable Counterweight
• Materiale: Træ
• Varens vægt: 14.74 pund (6.7 kilo)
• Pakkedimensioner: 19 x 16.7 x 7.5 tommer
• Inkluderede komponenter: Dække
• Fabrikant: ENGLEHORN
• Oprindelsesland: Kina

Garanti og support

ANGELS HORN is dedicated to providing high-quality products and excellent customer service.

• Kvalitetsgaranti: The product comes with a 3-Year quality guarantee.
• Lifetime Accessories Support: Lifetime support is provided for accessories.
• Kundeservice: For any inquiries or support needs, ANGELS HORN offers 24-hour solutions feedback before and after service.
• Kontakte: Please refer to the contact information provided on the product packaging or the official ANGELS HORN webwebsted for direkte support.