SMALLRIG HawkLock H21 Quick Release Camera Monitor Mount

1. Introduktion

This manual provides instructions for the proper installation and use of the SMALLRIG HawkLock H21 Quick Release Camera Monitor Mount, Model 4487. This mount is designed to securely attach a field monitor to your camera rig, offering flexible positioning and quick detachment capabilities. It features a NATO clamp for attachment to a NATO rail and a 1/4"-20 screw for monitor connection, supporting monitors up to 2.5 kg.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Quick Release NATO Rail x 1
• Camera Monitor Mount x 1
• unbrakonøgle x 1

Figur 1: Pakkens indhold

3. Nøglefunktioner

• 3.1 Hurtigudløsermekanisme

  The HawkLock H21 features a quick-release design. To attach, press the release button to extend the pins, then slide the NATO rail into the mount's groove. Releasing the button securely locks the rail, enabling efficient setup and breakdown.

  

  Figure 2: Quick Release Operation

• 3.2 360° Swivel & 160° Tilt Adjustment

  The monitor holder allows for a full 360° swivel and a 160° tilt range, providing versatile positioning. The tilt axis tightness can be adjusted using the knob, and the horizontal axis tightness can be fine-tuned with the included hex wrench to accommodate different monitor weights.

  

  Figure 3: Swivel and Tilt Adjustment

• 3.3 Anti-Twist Design

  Integrated bouncy locating pins on the top plate enhance monitor security, particularly for models like Ninja V/V+. A silicone pad is also included to prevent scratching and twisting of the monitor.

  

  Figure 4: Anti-Twist and Anti-Scratch Features

• 3.4 Bred kompatibilitet

  The mount is designed to hold 5-inch or 7-inch camera monitors, LED lights, or microphones via its 1/4"-20 screw. It is compatible with various monitor brands and models.

  

  Figure 5: Monitor Compatibility

• 3.5 Holdbar konstruktion

  Constructed from aluminum alloy, the HawkLock H21 monitor holder is built for durability and long-term use. It supports a maximum dynamic load capacity of 2.5 kg (5.5 lbs).

  

  Figur 6: Lastkapacitet

4. Opsætning og installation

Follow these steps to install the monitor mount:

1. Attach NATO Rail to Camera Cage: Secure the provided NATO rail to your camera cage or other mounting system using the appropriate screws and the included Allen wrench. Ensure it is firmly tightened.
2. Attach Monitor Mount to NATO Rail: Press the quick release button on the monitor mount to extend the locking pins. Slide the monitor mount onto the installed NATO rail. Release the button to engage the pins and lock the mount in place.
3. Attach Monitor to Mount: Screw your 5-inch or 7-inch monitor onto the 1/4"-20 screw located on the top of the monitor mount. Ensure the monitor is securely fastened to prevent accidental detachment.

For a visual guide on installation and usage, please refer to the video below:

5. Betjening

Once installed, the monitor mount offers flexible positioning:

• Justering af hældning: Loosen the large knob on the side of the mount to adjust the monitor's vertical tilt angle. Tighten the knob to secure the monitor in the desired position.
• Justering af drejeled: The mount allows for 360° horizontal swivel. The tightness of this rotation can be adjusted using the included hex wrench on the corresponding screw.

6. Vedligeholdelse

For at sikre din skærmbeslags levetid og optimale ydeevne:

• Regularly inspect all screws and connections for tightness. Re-tighten as necessary using the provided Allen wrench.
• Keep the mount clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Store the mount in a dry, dust-free environment when not in use.

7. Fejlfinding

If you encounter issues with your monitor mount, consider the following:

• Monitor not holding position: Ensure the tilt adjustment knob is fully tightened. If the horizontal swivel is too loose, use the Allen wrench to adjust its tension.
• Difficulty with quick release: Ensure the release button is fully pressed when attempting to slide the mount on or off the NATO rail. Check for any obstructions in the rail groove.
• Mount føles ustabil: Verify that both the NATO rail and the monitor are securely attached to their respective mounting points. Check for any loose screws.

8. Specifikationer

9. Garanti og support

SMALLRIG-produkter er fremstillet efter høje kvalitetsstandarder. For garantioplysninger, teknisk support eller serviceforespørgsler henvises til den officielle SMALLRIG-side. webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.