Fydun Fydunrkt1qmx8oz

Fydun M5 LCD Display 48V 5 Pin Electric Meter User Manual

Model: Fydunrkt1qmx8oz

1. Introduktion

This manual provides essential information for the installation, operation, and maintenance of your Fydun M5 LCD Display. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

The Fydun M5 LCD Display is a versatile electric meter designed for electric bikes and scooters. It features a clear display for essential riding data and is built for durability and ease of use.

2. Produktet er slutview

The M5 LCD Display offers a clear interface for monitoring your electric vehicle's performance. Key features include:

  • Vandtæt Design: The display is designed to withstand various weather conditions, ensuring reliable operation even in rain.
  • Holdbar konstruktion: Built with premium ABS material and sturdy wiring, it ensures a low failure rate and long-term performance.
  • Nem installation: Compatible with 31.8mm and 22.2mm mounting apertures, facilitating straightforward installation on most electric bikes and scooters.
  • Udskiftningsdel: An ideal component for replacing old or damaged displays, restoring full functionality and enhancing the vehicle's appearance.
Fydun M5 LCD Display front view

Billede: Forside view of the Fydun M5 LCD Display with its control unit and connector cable.

Fydun M5 LCD Display features: Good Replacement, Waterproof Design

Image: Visual representation highlighting the display's waterproof design and suitability as a replacement part.

3. Specifikationer

FeatureDetalje
ModelnummerFydunrkt1qmx8oz
Voltage Kompatibilitet24V, 36V, 48V, 60V Universal
Fastgør konfiguration5 Pin Electric Meter
Monteringsåbning31.8 mm (valgfrit 22.2 mm)
MaterialePremium ABS
Display TypeLCD
Fydun M5 LCD Display dimensions and 5-pin connector diagram

Image: Diagram showing the dimensions of the M5 LCD Display and the pinout for the 5-pin connector.

4. Hvad er der i æsken

Når du åbner pakken, bør du finde følgende ting:

  • 1 x Electric LCD Meter (Fydun M5 LCD Display)
  • 1 x Brugsanvisning (dette dokument)
  • 1 x forbindelseskabel

5. Opsætning og installation

Follow these steps to properly install your Fydun M5 LCD Display:

  1. Klargør styret: Ensure the handlebar area where you intend to mount the display is clean and free from obstructions. The display supports 31.8mm and 22.2mm handlebar diameters.
  2. Monter skærmen: Securely attach the display bracket to your electric bike or scooter's handlebar. Use the appropriate mounting aperture for your handlebar size. Tighten the screws firmly but do not overtighten.
  3. Tilslut styreenheden: Attach the separate control unit (buttons) to a convenient location on your handlebar, typically near your thumb for easy access.
  4. Connect the 5-Pin Cable: Locate the 5-pin connector on your electric bike/scooter's controller or wiring harness. Carefully align the pins and connect the display's cable. Ensure a snug fit. Refer to the pinout diagram for correct wiring if you are performing a custom installation or replacement.
  5. Kabelstyring: Route the cables neatly along the handlebar and frame, securing them with cable ties if necessary, to prevent interference with steering or moving parts.
  6. Første gang tændt: After installation, power on your electric bike/scooter to check if the display illuminates and shows data correctly.
Fydun M5 LCD Display mounted on a handlebar with control unit

Image: The M5 LCD Display and its control unit mounted on a bicycle handlebar, showing the typical installation setup.

5-pin connector wiring diagram for Fydun M5 LCD Display

Image: Detailed diagram of the 5-pin connector, indicating the color and function of each wire (Red, Blue, Black, Green, Yellow).

6. Betjeningsvejledning

The Fydun M5 LCD Display provides real-time information and control for your electric vehicle. Here's how to operate it:

6.1 Tænd/sluk

  • To power on the display, press and hold the power button (usually the middle button on the control unit) for a few seconds.
  • For at slukke skal du trykke på tænd/sluk-knappen igen, indtil skærmen slukker.

6.2 Vis information

Displayet viser typisk følgende oplysninger:

  • Hastighed: Aktuel kørehastighed (km/t eller mph).
  • Batteriniveau: An energy bar indicating the remaining battery charge.
  • Rejseafstand: Tilbagelagt afstand under den aktuelle rejse.
  • Fartpilot: Indication if cruise control is active.
  • Manuel tilstand: Indication if manual mode is active.

6.3 Button Functions (Control Unit)

The control unit typically has three buttons:

  • Op-knap (▲): Used to increase values, navigate menus, or activate certain functions (e.g., higher assist level).
  • Ned-knap (▼): Used to decrease values, navigate menus, or activate certain functions (e.g., lower assist level).
  • Middle Button (M / Power): Used to power on/off, confirm selections, or switch display modes (e.g., between ODO, Trip, Time).

Note: Specific button functions and display modes may vary slightly depending on the electric vehicle's controller settings. Refer to your vehicle's main manual for advanced settings.

Close-up of the Fydun M5 LCD Display control buttons

Billede: Nærbillede view of the three-button control unit, showing the Up, Down, and Middle (M) buttons.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your Fydun M5 LCD Display, follow these maintenance guidelines:

  • Rensning: Tør skærmen og kabinettet af med en blød kludamp klud. Undgå at bruge slibende rengøringsmidler, opløsningsmidler eller barske kemikalier, da disse kan beskadige skærmen ellerasing.
  • Vandeksponering: While the display is waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is always dry before connecting or disconnecting.
  • Kabelinspektion: Kontrollér regelmæssigt alle kabler og stik for tegn på slid, flosning eller beskadigelse. Sørg for, at forbindelserne er sikre.
  • Opbevaring: If storing your electric vehicle for an extended period, ensure the display is clean and dry. Store in a cool, dry place away from direct sunlight.
  • Undgå påvirkning: Protect the display from physical impacts or drops, which can cause internal or external damage.

8. Fejlfinding

If you encounter issues with your Fydun M5 LCD Display, refer to the following common troubleshooting steps:

ProblemMulig årsagLøsning
Skærmen tændes ikke.
  • Løst eller afbrudt strømkabel.
  • Vehicle battery is dead or low.
  • Faulty display or controller.
  • Check all 5-pin connections for secure fit.
  • Oplad køretøjets batteri.
  • Contact customer support if connections and battery are fine.
Forkerte hastigheds- eller afstandsaflæsninger.
  • Incorrect wheel diameter setting (if adjustable).
  • Sensorfejl.
  • Consult your electric vehicle's main manual for display settings adjustment.
  • Inspect speed sensor and magnet for proper alignment and damage.
Knapperne reagerer ikke.
  • Control unit cable loose.
  • Internal button malfunction.
  • Check the connection of the control unit to the main display cable.
  • Kontakt kundesupport.

If the problem persists after attempting these solutions, please contact Fydun customer support for further assistance.

9. Garanti og support

Fydun products are manufactured to high-quality standards. For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Fydun webwebsted.

When contacting support, please have your product model number (Fydunrkt1qmx8oz) and purchase date available.

Visit the Fydun Store for more information