tectake Modica Garden Furniture Set

1. Introduktion og sikkerhedsoplysninger

Thank you for choosing the tectake Modica Garden Furniture Set. This manual provides essential information for the safe assembly, use, and maintenance of your new furniture set. Please read these instructions carefully before assembly and retain them for future reference.

Sikkerhedsadvarsel:

This product requires assembly. Follow the included assembly manual carefully to prevent injury. Exercise caution when handling small or sharp parts during assembly and maintenance.

• Sørg for, at alle komponenter er til stede og ubeskadigede, før monteringen påbegyndes.
• Saml møblerne på en blød, ren overflade for at forhindre ridser.
• Overspænd ikke skruerne under den første montering; spænd dem helt, når alle dele er justeret.
• Hold børn og kæledyr væk fra samlingsområdet.
• Do not exceed the maximum weight capacities specified in this manual.

2. Pakkens indhold

Before starting assembly, verify that all parts listed below are present in your package. If any parts are missing or damaged, please contact customer support.

Billede: Overview of package contents and dimensions.

• 2x Loungers
• 1x Side Table
• Monteringshardware (skruer, skiver osv.)
• Monteringsvejledning

3. Monteringsvejledning

The tectake Modica Garden Furniture Set is designed for straightforward assembly. Please follow the detailed steps provided in the separate assembly manual included in your package. A general overview of key assembly points is provided below.

1. Udpak komponenter: Carefully remove all parts from the packaging and lay them out on a soft, flat surface.
2. Saml stole: Attach the seat and backrest sections to the pre-assembled frame using the provided hardware. Ensure all connections are secure but do not fully tighten screws until the chair is stable.
3. Saml sidebord: Connect the tabletop to the table legs using the provided hardware.
4. Endelig stramning: Once all components are loosely assembled and aligned, gradually tighten all screws until they are firm. Avoid overtightening to prevent damage.
5. Juster nivelleringsfødderne: The chairs and table are equipped with adjustable screw feet and anti-slip plastic caps. Adjust these feet to ensure stability on uneven surfaces.

Image: Details of ergonomic design, airy seat structure, side table, and adjustable feet for stability.

4. Brug

The tectake Modica Garden Furniture Set is designed for comfortable outdoor seating for two people. Its compact design makes it ideal for balconies, patios, or small garden spaces.

• Komfort: The ergonomically shaped loungers with high backrests and wide seating areas provide a comfortable experience.
• Sidebord: Use the accompanying side table for drinks, snacks, books, or other small items.
• Placering: Position the furniture on a stable, level surface. Adjust the screw feet as needed to prevent wobbling.

Image: The tectake Modica set in an outdoor setting.

5. Vedligeholdelse og pleje

To ensure the longevity and appearance of your tectake Modica Garden Furniture Set, follow these simple maintenance guidelines:

• Rensning: Tør af med annonceamp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with water. Avoid abrasive cleaners or harsh chemicals.
• Vejrbestandighed: The furniture is made from high-quality plastic and a powder-coated steel frame, making it weather-resistant. It is designed to withstand wind and various weather conditions.
• UV beskyttelse: The rattan-look plastic is UV-resistant, helping to prevent fading from sun exposure.
• Opbevaring: While weather-resistant, storing the furniture indoors or covering it during prolonged periods of harsh weather (e.g., heavy snow, extreme cold) will further extend its lifespan.
• Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary. The screws are 100% stainless steel.

Image: The furniture set demonstrating its wind and weather resistance.

6. Fejlfinding

• Vaklende møbler: If a chair or table wobbles, adjust the height of the screw feet located at the bottom of the legs until the item is stable.
• Besvær med at samle: Ensure you are following the assembly manual step-by-step. Do not fully tighten screws until all parts are correctly aligned. If a part does not fit, double-check its orientation.
• Manglende dele: If any parts are missing from your package, please contact tectake customer support with your model number and purchase details.

7. Specifikationer

8. Garanti og support

For warranty information, product support, or to order replacement parts, please refer to the contact details provided with your purchase or visit the official tectake webwebsted. Hav venligst modelnummeret (405023) og købsdatoen klar, når du kontakter support.

You can find more information about tectake products and support at: www.tectake.nl