Brugermanual til TECKNET trådløst dørklokkesystem

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of your TECKNET Wireless Doorbell System. This system includes one wireless transmitter (doorbell button) and two plug-in receivers (chimes). It features a 400-meter wireless range, IP66 waterproof rating for the transmitter, 60 selectable chimes, 5 adjustable volume levels, and an RGB light indicator.

Image: The TECKNET Wireless Doorbell System showing one transmitter and two receivers.

2. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 × Transmitter (Doorbell Button)
• 2 × Plug-in Receivers (Chimes)
• 1 × Installation Toolkit (screws, anchors, adhesive tape)
• 1 × Brugermanual (dette dokument)

3. Produktfunktioner

• Plug & Play Receivers: The receivers plug directly into a standard electrical outlet, requiring no batteries for operation.
• IP66 Vandtæt Transmitter: The doorbell button is designed to withstand various weather conditions, operating reliably in temperatures from -20°C to 60°C.


Image: The IP66 waterproof transmitter shown with water droplets, indicating its weather resistance.

• Udvidet trådløs rækkevidde: Enjoy a wireless range of up to 400 meters (1300 feet) in open areas, ensuring reliable signal transmission throughout your home or property.


Image: Illustration of the doorbell system covering a large house and yard, demonstrating the 400-meter wireless range.

• 60 Chimes and 5 Volume Levels: Choose from 60 distinct melodies and adjust the volume to one of 5 levels, ranging from 0dB to 110dB.


Image: A child and adult singing next to a plug-in receiver, highlighting the 5 adjustable volume levels and 60 chimes.

• RGB Light Indicator: The receiver features an RGB light that flashes when the doorbell is pressed, providing a visual alert.
• Lydløs: Activate silent mode to receive visual alerts (RGB light flash) without an audible chime, ideal for quiet environments or when a baby is sleeping.


Image: A sleeping baby next to a plug-in receiver, illustrating the silent mode feature with only the RGB light flashing.

• Hukommelsesfunktion: The system automatically restores your last selected volume and chime settings after a power outage.


Image: A plug-in receiver in a bedroom, showing a graphic representation of the memory function for volume and ringtone settings.

4. Opsætning og installation

4.1 Installation af sender (dørklokkeknap)

Senderen kan installeres med enten tape eller skruer.

1. Montering af klæbemiddel: Clean the mounting surface thoroughly. Peel off one side of the double-sided adhesive tape and attach it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired location (e.g., door frame, wall).
2. Installation af skruer: Open the back cover of the transmitter. Mark the positions for drilling holes. Drill two holes, insert the provided anchors, and then secure the transmitter's back plate with the screws. Snap the transmitter onto the secured back plate.

Image: A diagram illustrating both adhesive and screw installation methods for the doorbell transmitter.

4.2 Opsætning af modtager

Plug the receiver(s) into any standard electrical outlet within the wireless range of the transmitter. Ensure the outlet is easily accessible and not obstructed.

5. Betjeningsvejledning

5.1 Changing Chime

To select a chime:

1. Press the "Chime Selection" button on the receiver to cycle through the available 60 melodies.
2. Once you hear your desired chime, stop pressing the button. The chime will be saved automatically due to the memory function.

5.2 Justering af lydstyrke

Sådan justeres lydstyrken:

1. Press the "Volume" button on the receiver to cycle through the 5 volume levels.
2. The volume levels range from silent (0dB) to maximum (110dB).

5.3 Lydløs tilstand

To activate silent mode, press the "Volume" button until the volume reaches 0dB. In this mode, the receiver will only flash its RGB light when the doorbell button is pressed, providing a visual notification without sound.

5.4 Pairing Transmitter with Receiver(s)

The transmitter and receivers are pre-paired at the factory. If re-pairing is needed or if you add additional transmitters/receivers:

1. Tilslut modtageren.
2. Press and hold the "Volume" button on the receiver for approximately 5 seconds until the RGB light flashes rapidly. This indicates pairing mode.
3. Immediately press the transmitter button once. The receiver will chime or flash its light to confirm successful pairing.
4. If pairing multiple transmitters or receivers, repeat the process for each unit.

6. Vedligeholdelse

6.1 Rengøring

Wipe the doorbell transmitter and receivers with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6.2 Udskiftning af senderbatteri

The transmitter uses a CR2032 lithium-ion button cell battery. When the doorbell button stops working or its range decreases significantly, the battery may need replacement.

1. Carefully open the back cover of the transmitter using a small screwdriver or coin.
2. Fjern det gamle CR2032-batteri.
3. Indsæt et nyt CR2032-batteri med den positive (+) side opad.
4. Luk bagdækslet forsvarligt.
5. Test the doorbell to ensure it functions correctly. If not, re-pair the transmitter with the receiver(s) as described in Section 5.4.

7. Fejlfinding

• Dørklokken ringer ikke:
  • Sørg for, at modtageren er korrekt tilsluttet en fungerende stikkontakt.
  • Check if the receiver is in silent mode (volume set to 0dB). Adjust the volume if necessary.
  • Replace the battery in the transmitter if it has been in use for an extended period (refer to Section 6.2).
  • Re-pair the transmitter with the receiver(s) (refer to Section 5.4).
• Kort trådløs rækkevidde:
  • Ensure there are no significant metal objects, thick walls, or other electronic devices directly between the transmitter and receiver that could interfere with the signal.
  • Relocate the receiver to a more central position or closer to the transmitter.
  • Udskift senderens batteri.
• Receiver RGB light not flashing:
  • Ensure the receiver is powered on and functioning.
  • If the doorbell rings but the light does not flash, contact customer support.

8. Specifikationer

9. Garanti og support

TECKNET products are designed for reliability and performance. This product comes with a standard warranty. Customers who register for membership may receive an extended warranty of up to 36 months.

For technical support, warranty claims, or further assistance, please contact TECKNET customer service through the official website or your purchase platform. Please have your model number and purchase date available when contacting support.

TECKNET: Technology Enhances Life