1. Produktet er slutview
The XOSS XR01 is an advanced bicycle tail light designed to enhance cycling safety. It features intelligent automatic lighting, a sensitive brake sensor, and a durable waterproof design. This manual provides detailed instructions for its installation, operation, and maintenance.
Image: XOSS XR01 Smart Tail Light highlighting its key features.
2. Pakkens indhold
Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:
- XOSS XR01 Tail Light x 1
- Saddle Bracket x 1
- Seatpost Bracket x 1
- Type-C ladekabel x 1
- Gummibånd x 1
- Binding Bands x 4
- Brugervejledning x 1
3. Installation
The XOSS XR01 offers two convenient installation methods without requiring any tools.
3.1 Seatpost Mount
Attach the seatpost bracket to your bicycle's seatpost using the provided rubber band. Then, slide the XR01 tail light onto the bracket until it clicks securely into place.
3.2 Saddle Mount
Secure the saddle bracket to the saddle rails using the binding bands. Once the bracket is firm, slide the XR01 tail light onto the bracket until it locks securely.
4. Opladning
The XOSS XR01 features a convenient Type-C charging port for quick and efficient power replenishment.
To charge, open the rubber cover on the side of the light to reveal the Type-C port. Insert the provided Type-C charging cable into the port and connect the other end to a USB power source. A full charge takes approximately 1 hour, providing 7-16 hours of use depending on the mode, and up to 3 months of standby time.
Video: Demonstrates Type-C charging and automatic light functions of a bicycle tail light.
5. Betjening
5.1 Tænd/sluk
Tryk og hold tænd/sluk-knappen nede i 2 sekunder for at tænde eller slukke lyset.
5.2 Modeskift
Once powered on, short press the power button to cycle through the available lighting modes. The XR01 features mode memory, automatically recalling the last used mode when turned on.
5.3 Automatic Lighting/Extinguishing
The XR01 is equipped with a vibration sensor. It will automatically turn on when vibration is detected. If no vibration is detected for 30 seconds, the light will automatically turn off to conserve battery. It will automatically turn back on when vibration is detected again.
5.4 Smart Brake Sensor
The built-in brake sensor detects when you are braking and automatically illuminates the light at maximum brightness, significantly enhancing safety by alerting vehicles behind you.
5.5 Tilstandshukommelse
The device automatically remembers the last used lighting mode before it was turned off, ensuring convenience for your next ride.
Video: Demonstrates various lighting modes and smart features of a bicycle tail light.
6. Vedligeholdelse
6.1 Vandtætning
The XOSS XR01 features an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. This allows for continued use even in heavy rain. Ensure the Type-C charging port cover is securely closed to maintain its waterproof integrity.
6.2 Rengøring
Tør lyset af med en blød, damp cloth to remove dirt and dust. Avoid using abrasive cleaners or solvents that could damage the surface or lens.
6.3 Opbevaring
When not in use for extended periods, store the tail light in a cool, dry place. It is recommended to fully charge the battery every three months to prolong its lifespan.
7. Fejlfinding
- Lyset tænder ikke: Sørg for, at batteriet er opladet. Tryk på tænd/sluk-knappen og hold den nede i 2 sekunder for at aktivere den.
- Brake sensor not working: Check if the light is securely mounted and positioned correctly. Ensure the sensor area is clean and unobstructed.
- Kort batterilevetid: Ensure the light is fully charged. Battery life can vary based on the selected lighting mode.
- Vandindtrængning: If water enters the device, immediately turn it off and allow it to dry completely. Ensure the Type-C port cover is properly sealed during use.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | XR01 |
| Mærke | XOSS |
| Strømkilde | Batteridrevet (genopladelig type C) |
| Vandmodstandsniveau | IPX6 vandtæt |
| Monteringstype | Seat Mount (Saddle & Seatpost) |
| Særlige funktioner | Brake Sensor, Automatic On/Off, Mode Memory, Innovative Optical Lens |
| Opladningstid | Ca. 1 time |
| Brugstid | 7-16 timer (afhængigt af tilstand) |
| Standby tid | Op til 3 måneder |
9. Sikkerhedsoplysninger
- Sørg altid for, at baglygten er forsvarligt monteret, inden du kører.
- Se ikke direkte ind i lyset, når det er tændt, da det kan forårsage midlertidig synsnedsættelse.
- Opbevares utilgængeligt for børn.
- Du må ikke skille enheden ad eller forsøge at reparere den selv. Kontakt kundesupport for at få hjælp.
- Bortskaf batteriet i henhold til lokale regler.
10. Garanti og support
Your XOSS XR01 Bicycle Tail Light comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding your product, please contact XOSS customer service through the retailer where you purchased the product or visit the official XOSS webwebsted.