AIYIMA DC48V 10A GaN Power Supply Adapter User Manual

Indledning

This manual provides essential information for the safe and efficient use of your AIYIMA DC48V 10A GaN Power Supply Adapter. This switching power supply is designed to convert AC110/220V input to a stable DC48V 10A output, suitable for various audio amplifiers, including the TPA3255 Stereo Audio Amplifier series (A07, A07 MAX, A08 PRO, A70).

The adapter features high efficiency, high power delivery, low power consumption, and is built with over-current, over-voltage, and short-circuit protection for reliable operation.

Hvad er der i æsken

1 x AIYIMA DC48V 10A GaN Power Supply Adapter (Model JYH37Z)

Note: An AC power cord is typically required and may be sold separately depending on the region.

Opsætning

Udpakning: Carefully remove the power supply from its packaging. Inspect for any signs of damage.
Placering: Place the power supply on a stable, flat surface with adequate ventilation. Ensure it is not covered or placed in an enclosed space that could restrict airflow.
Opret forbindelse til Amplivligere: Locate the DC input port on your compatible audio amplifier (e.g., AIYIMA A07, A07 MAX, A08 PRO, A70). Connect the DC output cable (5.5*2.5mm connector) from the power supply to the amplifier's DC input port. Ensure a secure connection.
Tilslut til vekselstrøm: Connect a suitable AC power cord (not included) to the AC input port on the power supply. Then, plug the AC power cord into a standard wall outlet (AC110V or AC220V, the unit supports both).
Tænd: Once all connections are secure, switch on the power supply (if it has a switch) and then power on your amplivligere.

Bag view of AIYIMA DC48V 10A GaN Power Supply Adapter showing AC input and DC output cable.

Billede: Bagside view of the power supply, illustrating the AC input port and the attached DC output cable.

Top og bund view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Billede: Top og bund views of the power supply, showing the overall design and the AC input port.

Betjeningsvejledning

The AIYIMA DC48V 10A GaN Power Supply Adapter is designed for straightforward operation. Once properly connected to your audio amplifier and an AC power source, it will provide stable DC48V power.

Ensure the power supply is securely connected to both the AC mains and your amplivligere.
Hvis din amplifier has a power switch, turn it on after the power supply is connected and powered.
The power supply operates automatically within its specified voltage range (AC110V-220V). No manual voltage-valg er påkrævet.
Overvåg din amplifier's performance. This power supply is designed to enhance power delivery, dynamics, and clarity for compatible amplivførere.

Front view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Billede: Forside view of the power supply, showing its compact design.

Opretholdelse

For at sikre strømforsyningens levetid og optimale ydeevne skal du følge disse vedligeholdelsesretningslinjer:

Rensning: Disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners, aerosols, or solvents.
Ventilation: Ensure that the ventilation openings on the power supply are not blocked. Proper airflow is crucial to prevent overheating.
Opbevaring: Hvis enheden opbevares i længere tid, skal den afbrydes til strømmen og opbevares et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
Kabelpleje: Avoid bending or crimping the power cables excessively. Regularly check cables for any signs of wear or damage.

Fejlfinding

If you encounter issues with your AIYIMA DC48V 10A GaN Power Supply Adapter, refer to the following common troubleshooting steps:

Problem	Mulig årsag	Løsning
Ingen strøm til amplivligere	AC power cord not connected or loose. Stikkontakten fungerer ikke. Power supply or ampafbrydning af lift.	Ensure AC power cord is securely plugged into both the power supply and the wall outlet. Test stikkontakten med en anden enhed. Verify both the power supply and amplifier are switched on.
Humming or noise from amplivligere	Problem med jordsløjfen. Interferens fra andre elektroniske enheder.	Ensure all audio components are connected to the same power strip or outlet. Try isolating the power supply from other devices. Consider using a ground loop isolator if the issue persists.
Power supply feels excessively hot	Utilstrækkelig ventilation. Overload (drawing too much current).	Ensure proper airflow around the unit. Do not cover. Bekræft din amplifier's power requirements do not exceed the power supply's 10A rating.

If the problem persists after attempting these solutions, please contact AIYIMA customer support.

Specifikationer

AIYIMA DC48V 10A GaN Power Supply Adapter with dimensions labeled.

Image: Dimensions of the AIYIMA DC48V 10A GaN Power Supply Adapter.

Feature	Detalje
Model	JYH37Z
Mærke	AIYIMA
Input bindtage	AC 110V / 220V (Auto-sensing)
Udgang Voltage	DC 48V
Udgangsstrøm	10A
Størrelse på DC-stik	5.5*2.5 mm
Materiale Type	GaN (Galliumnitrid)
Varedimensioner (L x B x H)	8.18 x 3.58 x 1.69 tommer (208 x 91 x 43 mm)
Varens vægt	2.5 pund
Sikkerhedscertificering	TUV

Garanti

This AIYIMA power supply comes with a 12 måneders garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller forkert installation.

Gem venligst dit købsbevis for garantikrav.

Støtte

For technical assistance, troubleshooting, or warranty inquiries, please contact AIYIMA customer support through the retailer where the product was purchased or visit the official AIYIMA webwebsted.

AIYIMA Official Store: ExploreHiFi·HearTrue on Amazon

AIYIMA JYH37Z