BONTEC Single Monitor Desk Mount MDM001A Instruction Manual

Indledning

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your BONTEC Single Monitor Desk Mount MDM001A. Please read this manual thoroughly before installation and retain it for future reference.

Vigtige sikkerhedsoplysninger

• Vægt kapacitet: Do not exceed the maximum weight capacity of 22 lbs (10 kg). Overloading may result in property damage or personal injury.
• Skærmstørrelse: Denne beslag er designet til skærme mellem 13 og 34 tommer.
• VESA-kompatibilitet: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm.
• Skrivebordsstabilitet: Verify that your desk surface is stable and strong enough to support the combined weight of the mount and your monitor.
• Installation: Follow all installation steps carefully. If you are unsure about any part of the installation, seek professional assistance.
• Bevægelige dele: Be cautious when adjusting the mount to avoid pinching fingers or other body parts.

Pakkens indhold

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.

• Skærmarmsamling
• Skrivebord Clamp Komponent
• Grommet Base Component
• VESA-plade
• Hardware-sæt (skruer, skiver, afstandsstykker)
• Allen Keys
• Kabelhåndteringsklip

Billede: Overview of the BONTEC Single Monitor Desk Mount MDM001A, illustrating the main components and both desk clamp and grommet base installation options.

Opsætning og installation

The BONTEC Single Monitor Desk Mount offers two installation methods: Desk Clamp og Grommet Base. Vælg den metode, der passer bedst til dit skrivebord.

Kompatibilitetstjek

• Skærmstørrelse: 13-34 tommer
• Skærmvægt: Op til 22 lbs (10 kg)
• VESA-mønstre: 75x75mm eller 100x100mm

Image: Visual representation of monitor compatibility requirements, including screen size, weight, and VESA patterns.

Installationsmetoder

Image: Detailed illustration comparing the Desk Clamp and Grommet Base installation methods, including compatible desk thickness and hole diameter specifications.

Method 1: Desk Clamp Installation

1. Fastgør skrivebordet clamp component to the main pole.
2. Placer clamp on the edge of your desk. Ensure the desk thickness is between 0.39" and 3.35".
3. Spænd clamp screw firmly until the mount is securely fixed to the desk.

Method 2: Grommet Base Installation

1. If your desk has a bolt-through hole, ensure its diameter is between 0.39" and 3.35" and the desk thickness is between 0.39" and 3.15".
2. Disassemble the desk clamp and use the grommet base plate and screw.
3. Insert the grommet screw through the desk hole and secure it from underneath with the provided nut.
4. Attach the main pole to the grommet base.

Montering af monitoren

1. Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure a secure fit.
2. Carefully slide the monitor (with the attached VESA plate) onto the mounting head of the arm.
3. Tighten any security screws on the mounting head to prevent accidental dislodging.

Betjening og justeringer

The BONTEC monitor mount offers various adjustments to optimize your viewerfaring og ergonomisk kropsholdning.

Højdejustering

The monitor can be raised or lowered along the 16.73-inch pole. Loosen the collar on the pole, adjust the monitor to the desired height, and then re-tighten the collar to secure its position.

Image: Illustration of the monitor mount's vertical height adjustment capability along the central pole.

Vipning, drejning og rotation

The special swivel head design allows for flexible positioning:

• Vip: Adjust the screen vertically by ±15° to reduce glare and find the optimal viewvinkel.
• Drejelig: Rotate the monitor horizontally up to 360° to share your screen or change viewing retning.
• Rotation: Rotate the screen 360° from landscape to portrait mode for different tasks.

After adjusting the angle, use the back screw lock on the VESA plate to provide extra security and maintain the desired position.

Image: Visual guide to the tilt, swivel, and rotation adjustments available on the monitor mount.

Kabelstyring

Utilize the integrated cable management clips along the pole to route and organize your monitor cables. This helps maintain a tidy workspace and prevents cable clutter.

An integrated storage slot for Allen keys is also provided on the pole for convenient access to adjustment tools.

Billede: Nærbillede view of the cable management clips and the Allen key storage slot on the mount's pole.

Opretholdelse

• Rensning: Rengør holderen med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
• Periodiske kontroller: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre. Spænd efter om nødvendigt.
• Smøring: Dette produkt kræver typisk ingen smøring.

Fejlfinding

Specifikationer

• Mærke: BONTEC
• Model: MDM001A
• Skærmstørrelseskompatibilitet: 13-34 tommer
• Vægt kapacitet: 22 lbs (10 kg)
• VESA-kompatibilitet: 75x75mm, 100x100mm
• Hældningsområde: ±15°
• Drejerækkevidde: 360°
• Rotation: 360°
• Højdejustering: Up to 16.73 inches (along pole)
• Skrivebord Clamp Tykkelse: 0.39" - 3.35"
• Grommet Base Desk Thickness: 0.39" - 3.15"
• Grommet Hole Diameter: 0.39" - 3.35"
• Materiale: Metal
• Farve: Sort

Garanti og support

Specific warranty details are not provided within this manual. For warranty information, technical support, or to inquire about replacement parts, please visit the official BONTEC webhjemmeside eller kontakt deres kundeservice direkte.

Webwebsted: BONTEC Store on Amazon