Radiomaster Pocket ELRS Charcoal M2 Transmitter Instruction Manual

1. Introduktion og overview

The Radiomaster Pocket is a compact and lightweight radio transmitter designed for remote control applications, particularly for drones and other RC models. It features Hall Gimbal technology for precise control and comes pre-installed with EdgeTX firmware, offering extensive customization and functionality. Its portable design, including removable stick ends and a foldable antenna, makes it convenient for transport and storage.

Image: Radiomaster Pocket ELRS Charcoal M2 Transmitter in Charcoal color.

2. Opsætning

2.1 Batteriinstallation

The Radiomaster Pocket uses two 18650 batteries (not included with all variants). Ensure batteries are inserted with correct polarity as indicated inside the battery compartment.

Image: Radiomaster Pocket Transmitter with two 18650 batteries.

2.2 Attaching/Removing Stick Ends

The stick ends are removable for compact storage. To attach, align the stick end with the gimbal shaft and gently push and twist until secure. To remove, pull the stick end straight off.

2.3 Folding/Unfolding Antenna

The antenna is foldable for portability. Gently fold it down for storage or extend it upright for optimal signal transmission during operation.

3. Betjeningsvejledning

3.1 Tænd/sluk

To power on, press and hold the power button until the screen illuminates. To power off, press and hold the power button until the device shuts down.

3.2 Navigation with EdgeTX Firmware

The transmitter runs on EdgeTX firmware. Use the navigation buttons (PAGE>, PAGE<, RTN, SYS, TELE) and the scroll wheel to navigate through menus and adjust settings on the backlit LCD screen.

3.3 Joystick Calibration

Regular joystick calibration ensures accurate control. Follow the on-screen prompts in the Hardware Settings menu to perform calibration. Move both joysticks through their full range of motion during this process.

3.4 Pairing with a Drone

After calibration, proceed to pair the transmitter with your drone according to the drone's specific instructions and the selected RF protocol (e.g., ExpressLRS or CC2500). The video above also shows the pairing process.

4. Funktioner

• Interne RF-muligheder: Available in ExpressLRS and MPM CC2500 versions, supporting various protocols depending on the module.
• EdgeTX-firmware: Preinstalled for advanced functionality and customization.
• Hall-effekt gimbals: Provides smooth centering and precise response for enhanced control.
• Bærbart design: Har aftagelige pinde og en foldbar antenne for nem transport og opbevaring.
• Indbygget LED lys: Helps visualize switch inputs and operational status.
• Baggrundsbelyst LCD-skærm: Offers a clear display for settings and telemetry data.
• Trimknapper: For easy and precise channel trimming.
• Ekstern modulbås: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• Strømkilde: Kompatibel med 18650 batterier for længerevarende drift.
• Opladning: Built-in USB-C QC3 charging.
• Tilpasning: Optional case colors (Blue, Pink, Green, Orange) are available to personalize the transmitter.

5. Specifikationer

Image: Diagram illustrating the folded and unfolded dimensions of the Radiomaster Pocket Transmitter.

6. Hvad er der i æsken

• 1 x Radiomaster Pocket Radio Transmitter
• 1 x specialfremstillet bæretaske
• 1 x USB-C kabel
• 1 x skærmbeskytter
• 1 x klistermærke
• 4 x lavspændingsfjedre
• 1 x manuel

7. Vedligeholdelse

To ensure the longevity and optimal performance of your Radiomaster Pocket Transmitter, follow these maintenance guidelines:

• Rensning: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or abrasive materials.
• Opbevaring: Store the transmitter in its custom carry pouch in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Batteripleje: Always use recommended 18650 batteries. Do not overcharge or over-discharge batteries. Dispose of old batteries responsibly.
• Gimbal-beskyttelse: When transporting, ensure stick ends are removed or protected to prevent damage to the gimbals.

8. Fejlfinding

If you encounter issues with your Radiomaster Pocket Transmitter, consider the following common solutions:

• Senderen tænder ikke: Ensure batteries are correctly installed and fully charged. Check the USB-C cable if charging.
• No Drone Connection: Verify that the transmitter and drone are using the same RF protocol and are correctly bound. Re-perform the pairing process if necessary.
• Uregelmæssig kontrol: Perform a joystick calibration as described in Section 3.3. Check for any physical obstructions or damage to the gimbals.
• Firmwareproblemer: If experiencing software glitches, consider updating or re-flashing the EdgeTX firmware via USB or the SD card, following official Radiomaster guides.
• Skærmen viser ikke: Check power connection. If the issue persists, contact support.

9. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official Radiomaster website or contact your authorized dealer. Keep your proof of purchase for warranty claims. The manufacturer, Xiangtat, provides support for this product.