Indledning
Thank you for choosing the Dangbei Gimbal Projector Stand. This stand is designed to provide a stable and adjustable platform for your projector, enhancing your viewing experience. Constructed from high-quality aluminum alloy, it offers durability and supports devices up to 11 lbs (5 kg). This manual provides essential information for proper setup, operation, and maintenance of your projector stand.
Vigtige sikkerhedsoplysninger
- Sørg for, at stativet er placeret på en stabil, plan overflade for at forhindre, at det vælter.
- Overskrid ikke den maksimalt understøttede vægt på 5 kg.
- Keep the stand away from water or excessive moisture.
- Undgå at placere stativet i direkte sollys eller i nærheden af varmekilder.
- Do not attempt to disassemble or modify the stand, as this may void the warranty and cause damage.
- Opbevares utilgængeligt for børn og kæledyr.
Pakkens indhold
Tjek venligst pakken for følgende varer:
- Dangbei Gimbal Projector Stand (Main Unit)
- Brugermanual (dette dokument)
- Note: Projector not included.
Opsætningsinstruktioner
The Dangbei Gimbal Projector Stand features a quick 2-step assembly process.
- Pak stativet ud: Fjern forsigtigt alle komponenter fra emballagen.
- Tilslut projektor: Align the standard 1/4" screw on the stand with the mounting hole on your projector (or compatible device). Rotate the projector clockwise until it is securely fastened to the stand. Ensure the connection is firm but do not overtighten.
Image: The Dangbei Gimbal Projector Stand with a projector securely mounted, illustrating the assembled unit. The stand features a sturdy base and two supporting arms, holding the projector at an angle.
Betjeningsvejledning
The Dangbei Gimbal Projector Stand allows for flexible positioning of your projector.
- Placering: Position the stand on a flat, stable surface where you intend to project.
- Justering af hældning: The stand features an adjustable tilt range exceeding 180 degrees. Gently hold your projector and adjust its angle to achieve the desired projection position, including ceiling projection. The gimbal mechanism will hold the projector in place once adjusted.
- Kompatibilitet: The standard 1/4" screw makes this stand compatible with Dangbei DBOX02, DBOX01, DBX3 Pro projectors, as well as other projectors, cameras, and lights that feature a compatible mounting thread.
Opretholdelse
- Rensning: Wipe the stand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Opbevaring: Når stativet ikke er i brug, skal det opbevares køligt og tørt, væk fra direkte sollys.
- Inspektion: Periodically check all connections and components for any signs of wear or damage.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stativet er ustabilt. | Uneven surface; projector weight exceeds limit; projector not securely attached. | Place on a flat, stable surface. Ensure projector weight is within 11 lbs (5 kg). Tighten the 1/4" screw securely. |
| Projector angle does not hold. | Projector is too heavy; gimbal mechanism may be worn or damaged. | Verify projector weight is within specifications. If the issue persists and the projector is within weight limits, contact customer support. |
| Stand appears damaged. | Fysisk påvirkning; fabrikationsfejl. | Stop brugen. Kontakt kundesupport for at få hjælp. |
Specifikationer
- Dimensioner (L * B * H): 278 x 217 x 197 mm (ca. 10.94 x 8.54 x 7.76 tommer)
- Nettovægt: 4.4 lbs (2 kg)
- Maksimal understøttet vægt: 11 lbs (5 kg)
- Materiale: Høj kvalitet aluminiumslegering
- Monteringsskrue: Standard 1/4"
- Justerbar hældning: Exceeds 180 degrees
- Kompatible enheder: Dangbei DBOX02, DBOX01, DBX3 Pro Projectors, and other devices with a 1/4" mounting thread.
Garanti og support
For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Dangbei website. You may also contact Dangbei customer service directly for assistance with product issues or inquiries.
Webwebsted: www.dangbei.com
E-mail: support@dangbei.com