Reboot Plasma Cutter RBC6000DL PRO User Manual

1. Introduktion

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Reboot Plasma Cutter RBC6000DL PRO. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

2. Sikkerhedsoplysninger

Plasma cutting involves high voltage, high temperatures, and intense light. Always adhere to the following safety precautions:

• Wear appropriate personal protective equipment (PPE), including a welding helmet with a suitable shade, flame-resistant clothing, gloves, and safety shoes.
• Sørg for korrekt ventilation for at undgå at indånde dampe.
• Må ikke anvendes i våde omgivelser eller i nærheden af ​​brandfarlige materialer.
• Always disconnect power before performing maintenance or changing consumables.
• Hold børn og uautoriseret personale væk fra driftsområdet.
• Sørg for, at maskinen er korrekt jordet.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Reboot Plasma Cutter RBC6000DL PRO Unit
• AG60 Plasma Cutting Torch
• Jord Clamp
• Air Hose and Air Filter Regulator
• Free 10pcs of Consumables
• Instruktionsmanual (dette dokument)

Figure 3.1: Included accessories with the Reboot Plasma Cutter RBC6000DL PRO.

4. Produktet er slutview

The Reboot Plasma Cutter RBC6000DL PRO is a 60 Amp non-touch pilot arc plasma cutter machine designed for clean and severance cuts on various metals. It features dual voltage capability (120V/240V) and an upgraded digital display.

Figur 4.1: Forside view of the Reboot Plasma Cutter RBC6000DL PRO.

4.1. Kontrolpanel og skærm

The large digital LED screen provides real-time information on air pressure, pilot arc status, post-air settings, and current. It also features an error code system for easy troubleshooting.

Figur 4.2: Detaljeret view of the LED digital display.

Figure 4.3: Air pressure display indicators and error codes.

Figure 4.4: Upgraded turn-on/turn-off time-delay protection function.

4.2. Komponenter og forbindelser

Figure 4.5: Key components and their functions.

1. Pressure Adjust Knob: Adjusts the air pressure.
2. Tænd/sluk: Hovedafbryder.
3. Strømkabel: Tilsluttes strømforsyningen.
4. Hose Interface: Tilslutningspunkt for luftslange.
5. Luftregulator: Regulates incoming air pressure.
6. Højhastigheds ventilator: Sørger for køling af de interne komponenter.
7. Current Adjust: Knob to set the cutting current (Amps).
8. Digital skærm: Shows various operational parameters.
9. 2T/4T/Air Testing: Buttons for selecting trigger modes and air testing.
10. Post Air/Pilot Arc Adjustment: Buttons for adjusting post-air flow and pilot arc settings.
11. Cutting Torch Interface: Connection for the plasma cutting torch.
12. Torch Switch Socket: Connection for the torch trigger.
13. "+Output": Positiv udgangsterminal.
14. Pilot Arc Knob: Adjusts pilot arc intensity.

5. Opsætning

Følg disse trin for indledende opsætning:

1. Strømtilslutning: Connect the power cable to a suitable 120V or 240V power outlet. Ensure the circuit breaker rating is appropriate (50A at 120V, 30A at 240V).
2. Tilslutning af luftkompressor: Connect an air compressor (minimum 90 PSI, 60L/min, 750W or more) to the air filter regulator and then to the machine's air hose interface. The machine has a built-in air pressure sensor, so an external gauge is not required.
3. Brændertilslutning: Connect the AG60 plasma cutting torch to the cutting torch interface and the torch switch socket.
4. Jord Clamp Forbindelse: Fastgør jorden clamp to the workpiece or work table, ensuring a clean, secure connection for proper electrical contact.

Figure 5.1: Air filter regulator and built-in air pressure sensing system.

6. Betjeningsvejledning

This section details the steps for operating your plasma cutter.

6.1. Powering On and Initial Checks

1. Turn on the main power switch. The screen lights up after approximately four seconds.
2. Observe the digital display for air pressure readings. The green light indicates the normal air pressure range. Adjust the air pressure using the regulator if the red light indicates too high or too low pressure.
3. Perform an air test by pressing the "Air Testing" button to ensure proper air flow through the torch.

6.2. Skæreoperation

1. Vælg tilstand: Use the control panel to select between 2T (two-touch) or 4T (four-touch) trigger modes based on your cutting needs.
2. Juster strøm: Rotate the current adjust knob to set the desired amperage for your material thickness. The machine supports 15-35A at 120V and 15-60A at 240V.
3. Position Torch: Position the non-touch pilot arc torch approximately 1/8 inch above the workpiece. The non-touch feature allows cutting without direct contact, extending consumable life.
4. Start klipning: Press the torch trigger to initiate the pilot arc and begin cutting. Move the torch steadily along the desired cut line.
5. Post-Air Flow: The machine provides post-air flow after cutting to cool the torch and extend consumable life.

Figure 6.1: Plasma cutting in action.

The RBC6000DL PRO is capable of clean cuts up to 5/8 inch and severance cuts up to 4/5 inch. It can easily cut through rough, painted, and rusted surfaces with minimal slag.

7. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your plasma cutter.

• Forbrugsvarer: Regularly inspect and replace worn-out torch consumables (nozzles, electrodes, shield cups) to maintain cut quality and extend torch life.
• Luftfilter: Check and drain the air filter regulator regularly to remove moisture and contaminants from the air supply.
• Rensning: Keep the machine clean and free from dust and metal particles. Use compressed air to blow out internal components periodically, ensuring the machine is unplugged.
• Kabler og forbindelser: Inspect all cables and connections for damage or loose fittings before each use.

8. Fejlfinding

Se følgende tabel for almindelige problemer og løsninger på disse:

9. Specifikationer

10. Garanti og support

Reboot products are designed for durability and performance. For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Reboot webwebsted.

For yderligere ressourcer og produktinformation kan du besøge Reboot Store on Amazon.