Temank PowMr 10000W 48V Split-Phase Solar Inverter Instruction Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Temank PowMr 10000W 48V Split-Phase Solar Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference.

The inverter is a multifunctional device integrating a solar energy storage inverter, utility charging, and AC sine wave output. It features dual MPPT solar charge controllers and supports parallel operation for capacity expansion.

Billede 1.1: Front view of the Temank PowMr 10000W Hybrid Solar Inverter. The inverter is gray and orange with a central LCD display and an AC input breaker switch on the side.

2. Sikkerhedsoplysninger

Adherence to safety precautions is crucial during installation, operation, and maintenance. Failure to follow these instructions may result in electric shock, fire, or severe injury.

• Installation skal udføres af kvalificeret personale.
• Sørg for, at alle strømkilder er afbrudt, før du udfører ledningsføring eller vedligeholdelse.
• Skil ikke inverteren ad. Der er ingen dele indeni, som brugeren kan servicere.
• Inverteren genererer høj lydstyrketage. Avoid contact with internal components.
• Sørg for korrekt jordforbindelse af enheden.
• Install in a well-ventilated area, away from flammable materials and moisture.
• This inverter is compatible only with single crystalline and polycrystalline PV modules.
• Do not connect the positive or negative terminal of the solar panel to the ground.

Billede 2.1: Diagram illustrating the 360-degree protection features of the Temank PowMr inverter, including short circuit, over-current, over-voltage, under-bindtage, overload, backfill, over-temperature, and over-charge protection.

3. Opsætning og installation

3.1 Udpakning og inspektion

Upon receiving the inverter, carefully unpack and inspect it for any damage. The package should include:

• 10000W solar inverter
• Parallelt kommunikationskabel
• 2 x Battery Terminal Lugs
• 2 x M5 skruer
• Brugsanvisning

3.2 Montering af inverteren

Mount the inverter vertically on a sturdy wall in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for proper heat dissipation.

3.3 Ledningsforbindelser

Al ledningsføring skal overholde lokale og nationale elektriske forskrifter. Brug passende ledningstykkelser til alle tilslutninger.

3.3.1 Batteritilslutning

Connect the 48V battery bank to the inverter's battery terminals. Ensure correct polarity. The inverter supports AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4 batteries, and can operate without batteries.

3.3.2 PV-indgangsforbindelse

Connect the solar panels to the PV input terminals. The inverter features dual MPPT trackers, supporting two independent solar inputs. Max PV input power is 11KW (5500W per input), with a maximum PV input voltage of 500Vdc and starting voltage > 150V. PV wire gauge: 10AWG.

Billede 3.1: Illustration of the inverter's built-in dual MPPT functionality, showing two separate solar panel arrays connected to PV1 and PV2 inputs, allowing for independent tracking and optimized power generation even with shading or different panel specifications.

3.3.3 AC input/output forbindelse

Connect the utility grid or generator to the AC input. Connect your loads to the AC output. The inverter supports 120V/240V split-phase and single-phase output. AC cable gauge: 8-6 AWG.

Billede 3.2: Detailed wiring diagram for split-phase connection of the Temank PowMr inverter, showing connections for PV input, mains/generator input, AC output to loads, and battery. It highlights the L1+L2+N+PE configuration for split-phase systems.

Billede 3.3: Comparison of split-phase and single-phase wiring modes for the Temank PowMr inverter, illustrating how solar panels, batteries, and household loads are connected in each configuration. Important notices regarding PV open circuit voltage are included.

3.3.4 Parallel drift

The inverter supports parallel operation for capacity expansion, allowing up to 6 units to be connected for a maximum of 60kW. This enables 120V and 240V output simultaneously. Use the provided parallel communication cable for interconnection.

Billede 3.4: Diagram illustrating various parallel connection configurations for the Temank PowMr inverter, showing setups for two, three, and six inverters to achieve higher power output and split-phase operation.

4. Betjening

4.1 Tænd/sluk

1. Tænd: Ensure all connections are secure. Switch on the AC input breaker, then the DC battery breaker (if applicable), and finally the inverter's ON/OFF rocker switch.
2. Sluk: Reverse the power-on sequence. First, switch off the inverter's ON/OFF rocker switch, then the DC battery breaker, and finally the AC input breaker.

4.2 LCD-skærm og indstillinger

The LCD screen provides real-time monitoring of photovoltaic system operating data. Use the touchable keys to navigate menus and adjust settings.

Billede 4.1: Various screens of the LCD display on the Temank PowMr inverter, showing real-time data such as PV input, battery status, AC output, and system parameters.

4.3 opladningstilstande

The inverter offers four charging modes:

• Kun solenergi: Oplader batterier udelukkende fra solenergi.
• Netprioritet: Charges batteries primarily from the utility grid, with solar as a supplement.
• Solprioritet: Charges batteries primarily from solar, with the utility grid as a supplement.
• Blandet net-/PV-opladning: Utilizes both utility and PV power for charging.

4.4 Outputtilstande

The inverter supports two output modes:

• Forsyningsbypass: Belastninger forsynes direkte fra forsyningsnettet.
• Inverter output: Loads are powered by the inverter (from solar or battery).

4.5 Time-Slot Charging/Discharging

The inverter features a time-slot charging and discharging function, allowing users to set specific periods for charging and discharging based on local electricity tariffs. This optimizes energy usage and can reduce costs.

Note: Before using this function, set the local time in parameters 54 and 55, then configure the time slots.

Billede 4.2: Graphic explaining the time-slot charging and discharging function, showing how users can define periods for utility/PV charging and battery discharging to optimize energy costs based on peak-valley electricity tariffs.

4.6 Strømbesparende tilstand

Enable power saving mode to conserve energy. If the load power drops below 50W, the inverter will switch off after a 5-minute delay. When the load exceeds 50W, the inverter automatically restarts.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din inverter.

• Rensning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris. The inverter features a detachable insect-proof screen for easy cleaning.
• Forbindelser: Kontrollér årligt alle elektriske forbindelser for tæthed og tegn på korrosion.
• Miljø: Sørg for, at installationsmiljøet forbliver inden for de angivne temperatur- og fugtighedsintervaller.
• Firmwareopdateringer: Tjek producentens webwebsted for tilgængelige firmwareopdateringer.

Billede 5.1: Nærbillede views highlighting the detachable insect-proof screen for easy cleaning and the intelligent cooling fans designed for efficient heat dissipation within the Temank PowMr inverter.

6. Fejlfinding

Dette afsnit indeholder løsninger på almindelige problemer. Kontakt kundesupport, hvis du har problemer, der ikke er nævnt her.

7. Tekniske specifikationer

Billede 7.1: A table summarizing the technical specifications of the Temank PowMr 10000W inverter, including input/output voltages, power ratings, battery compatibility, and communication interfaces.

8. Support og garanti

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Temank customer support. Refer to your purchase documentation for specific warranty terms and contact information.

You can also monitor and control the inverter via the SmartESS App. Download the app from the App Store or Google Play. Note that Wi-Fi/GPRS data acquisition modules are optional and need to be purchased separately.

Billede 8.1: Screenshots of the SmartESS mobile application, demonstrating its interface for monitoring and controlling the solar inverter system, with options to download from App Store and Google Play.