ROMECH 15.7-inch 130 LED Under Cabinet Motion Sensor Light (4-Pack) Instruction Manual

1. Produktet er slutview

The ROMECH Under Cabinet Light is a versatile, wireless lighting solution designed for various indoor spaces. Each light bar features 130 LED beads, offering three adjustable color temperatures (3000K warm, 4000K natural, 6000K white) and stepless dimming to suit different lighting needs. Equipped with a smart motion sensor, the light automatically activates in dark environments upon detecting human movement within a 10ft/120° range and turns off after 20 seconds of no motion. Its ultra-thin design and durable aluminum alloy construction ensure both aesthetic appeal and longevity. A built-in 3000mAh rechargeable battery provides extended operation, easily charged via USB-C.

Image 1.1: ROMECH 15.7-inch 130 LED Under Cabinet Motion Sensor Lights (4-Pack).

2. Pakkens indhold

• ROMECH 15.7-inch 130 LED Under Cabinet Light (4 units)
• USB-C opladningskabel (2 enheder)
• Magnetic Mounting Strips with Adhesive (8 units)
• Brugermanual

3. Sikkerhedsinstruktioner

• Udsæt ikke enheden for ekstreme temperaturer eller fugt.
• Keep away from water and other liquids. This product is not water-resistant.
• Do not attempt to disassemble or modify the light.
• Brug kun det medfølgende USB-C-kabel til opladning.
• Ensure the mounting surface is clean and dry before applying adhesive strips.
• Opbevares utilgængeligt for børn.

4. Opsætning og installation

The ROMECH Under Cabinet Light offers easy installation using magnetic mounting strips. No tools are required for typical installations.

1. Forbered overfladen: Clean the desired installation area thoroughly to ensure it is free of dust, grease, and moisture.
2. Fastgør magnetstrimler: Peel off the protective film from one side of the adhesive magnetic strip. Attach the adhesive side firmly to the desired mounting location (e.g., under a cabinet, inside a closet). Repeat for the second magnetic strip, ensuring they are spaced appropriately for the light bar.
3. Monter lyset: The light bar has built-in magnets. Simply align the light bar with the installed magnetic strips on the surface. The magnets will securely hold the light in place.

Image 4.1: Easy installation process using magnetic strips.

Note: The magnetic design allows for easy removal of the light bar for charging or repositioning.

5. Betjeningsvejledning

The light features two control buttons for mode selection, color temperature adjustment, and dimming.

Image 5.1: Control buttons and Type-C charging port on the ROMECH light.

5.1 Mode Selection (ON/AUTO/OFF Button)

• Tryk én gang: Aktiverer Altid-på mode. The light will stay on continuously.
• Tryk to gange: Aktiverer Bevægelsessensor mode. The light will blink three times to indicate this mode. In this mode, the light will only turn on in dark or low-light environments when motion is detected. It will automatically turn off after 20 seconds if no motion is detected.
• Tryk tre gange: Turns the light SLUKKET.

5.2 Color Temperature and Dimming (Second Button)

• Kort tryk: Cycles through the three color temperatures: 3000K (Warm Light), 4000K (Natural Light), and 6000K (White Light).
• Langt tryk: Aktiverer Trinløs dæmpning. Hold the button to adjust the brightness level from minimum to maximum, and release when the desired brightness is reached.

Image 5.2: Illustration of 3 color temperatures and stepless dimming capability.

5.3 Bevægelsessensorens funktionalitet

In Motion Sensor mode, the light detects human movement within a 10-foot (3-meter) range and a 120° angle. It is designed to conserve energy by only activating in dark or low-light conditions. If the ambient light is sufficient, the motion sensor will not trigger the light.

Image 5.3: Smart motion sensor range and detection area.

6. Opladningsinstruktioner

The ROMECH Under Cabinet Light is powered by a built-in 3000mAh rechargeable battery. When the battery is low, the light's performance may diminish.

1. Tilslut kablet: Insert the USB-C end of the charging cable into the charging port on the light bar.
2. Tilslut til strøm: Plug the USB-A end of the cable into a standard USB power adapter (not included), computer USB port, or power bank.
3. Opladningsindikator: A red indicator light will illuminate during charging. The light will turn off once the battery is fully charged.

Image 6.1: USB-C charging port and battery capacity details.

A full charge typically provides 6-8 hours of continuous use in Always-On mode or up to 60-90 days in Motion Sensor mode, depending on usage frequency.

7. Vedligeholdelse

• Rensning: Wipe the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Opbevaring: If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge every 3-6 months to maintain battery health.

8. Fejlfinding

9. Specifikationer

10. Officiel produktvideo

11. Garanti og support

ROMECH stands behind the quality of its products. This product includes a 45-dages pengene-tilbage-garanti og en 12 måneders garanti.

For any questions, concerns, or support needs regarding your ROMECH Under Cabinet Light, please contact our customer service team. We are committed to providing 100% satisfaction.

Contact information can typically be found on the product packaging or through your purchase platform.