MLOVE P1 Small Waterproof Bluetooth Speaker User Manual

1. Produktet er slutview

The MLOVE P1 is a compact and portable Bluetooth speaker designed for versatile audio enjoyment. It features 20W sound output, IPX7 waterproofing, LED lights, a Micro SD card slot, USB-C charging, and TWS (True Wireless Stereo) functionality for connecting two speakers.

Image: MLOVE P1 speaker, showcasing dens kompakte design.

Pakkeindhold:

• 1 x MLOVE P1 Portable Speaker
• 1 x USB-C opladningskabel
• 1 x snor
• 1 x brugermanual

2. Opsætning

2.1 Opladning af højttaleren

Before first use, fully charge the speaker. Connect the provided USB-C cable to the speaker's charging port and the other end to a USB power adapter (not included). The LED indicator will show charging status. A full charge takes approximately 2.5 hours.

Image: Close-up of the speaker's USB-C charging port and Micro SD card slot.

2.2 Tænd/sluk

• Sådan tænder du: Tryk på tænd/sluk-knappen ( og hold den nede)U) i 2-3 sekunder.
• Sådan slukker du: Tryk på tænd/sluk-knappen ( og hold den nede)U) i 2-3 sekunder.

2.3 Bluetooth -parring

1. Ensure the speaker is powered on and in Bluetooth pairing mode (LED will flash).
2. Aktiver Bluetooth på din enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
3. Select "MLOVE P1" from the list.
4. Once paired, the speaker will emit a confirmation sound, and the LED will remain solid.

2.4 TWS (ægte trådløs stereo) parring

To achieve a stereo sound experience, you can pair two MLOVE P1 speakers together.

1. Ensure both MLOVE P1 speakers are powered on and not connected to any other Bluetooth device.
2. On one speaker, double-press the Power button (UDen vil gå i TWS-parringstilstand.
3. De to højttalere vil automatisk oprette forbindelse til hinanden. En bekræftelseslyd vil indikere vellykket TWS-parring.
4. Once TWS paired, connect your device to one of the speakers via Bluetooth as described in section 2.3.

Image: Two MLOVE P1 speakers set up for True Wireless Stereo (TWS) with a laptop.

3. Betjeningsvejledning

3.1 Knapfunktioner

Image: Diagram showing the control buttons on the MLOVE P1 speaker.

• Power Button (U): Press and hold to Power On/Off. Double-press for TWS pairing.
• Tilstandsknap (M): Short press to switch between Bluetooth mode and Micro SD card mode.
• Play/Pause Button (►||): Short press to Play/Pause music.
• Lydstyrke ned (-) / Forrige spor: Short press for Volume Down. Long press for Previous Track.
• Lydstyrke op (+) / Næste spor: Short press for Volume Up. Long press for Next Track.

3.2 Musikafspilning

• Bluetooth-tilstand: After successful pairing, music from your connected device will play through the speaker.
• Micro SD -korttilstand: Insert a Micro SD card (up to 32GB, FAT32 format) with audio files into the slot. The speaker will automatically switch to Micro SD mode and begin playback. Press the Mode button (M) to switch between modes if needed.

3.3 LED lys

The speaker features auto-changing colorful LED lights that enhance the listening experience. These lights cycle through various colors automatically.

4. Vedligeholdelse

4.1 Rengøring

Tør højttaleren af ​​med en blød, damp klud. Brug ikke slibende rengøringsmidler, alkohol eller kemiske opløsningsmidler, da disse kan beskadige overfladen.

4.2 Opbevaring

Opbevar højttaleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer. Hvis den opbevares i en længere periode, skal batteriet oplades til ca. 50% hver par måneder for at bevare batteriets tilstand.

4.3 Waterproof Guidelines (IPX7)

The MLOVE P1 speaker is IPX7 waterproof, meaning it can be immersed in water up to 1 meter (3 feet) for 30 minutes. Ensure the charging port cover is securely closed before exposing the speaker to water. Avoid prolonged submersion or exposure to saltwater/chlorinated water, which may degrade seals over time. After water exposure, dry the speaker thoroughly before charging.

Image: MLOVE P1 speaker in a bathroom, illustrating its IPX7 waterproof capability.

5. Fejlfinding

• Højttaleren tænder ikke: Sørg for, at batteriet er opladet. Tilslut højttaleren til en strømkilde med USB-C-kablet.
• Kan ikke parres via Bluetooth:
  1. Sørg for, at højttaleren er i parringstilstand (blinkende LED).
  2. Sørg for, at Bluetooth er aktiveret på din enhed.
  3. Flyt højttaleren tættere på din enhed.
  4. Forget "MLOVE P1" from your device's Bluetooth list and try pairing again.
  5. Genstart både højttaleren og din enhed.
• Ingen lyd:
  1. Kontroller lydstyrkeniveauerne på både højttaleren og din tilsluttede enhed.
  2. Ensure the speaker is correctly paired.
  3. If using a Micro SD card, ensure it is inserted correctly and contains compatible audio files.
• TWS-parring mislykkes:
  1. Sørg for, at begge højttalere er fuldt opladede og ikke er forbundet til nogen anden Bluetooth-enhed.
  2. Try resetting both speakers by powering them off and on, then attempt TWS pairing again.

6. Specifikationer

7. Garanti og support

MLOVE is committed to providing quality products and customer satisfaction.

Image: MLOVE brand logo.

Garantioplysninger:

• 30 dages returret: Eligible for return within 30 days of purchase.
• 90 dages erstatning: Product replacement available within 90 days for manufacturing defects.
• 360 dages garanti: Comprehensive warranty coverage for 360 days from the date of purchase.

Kundesupport:

For any questions, technical assistance, or warranty claims, please contact MLOVE customer support. We offer 24x7 support, including weekends.

Please refer to your purchase platform or the MLOVE official webwebsted for kontaktoplysninger.