MDCMDCM Solar Motion Sensor Outdoor Lights

Indledning

Thank you for choosing the MDCMDCM Solar Motion Sensor Outdoor Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar lights. Designed for outdoor use, these lights offer bright, motion-activated illumination for enhanced security and visibility in areas such as gardens, yards, patios, and pathways. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Hvad er der i æsken

Ved udpakning skal du sørge for, at alle nedenstående varer er til stede og i god stand:

• 2 x MDCMDCM Solar Motion Sensor Outdoor Lights
• 2 x Vægbeslag
• Mounting Screws and Wall Plugs (typically 8 screws and 8 plugs)
• Brugermanual
• Remote Controls (quantity may vary based on pack size, typically one per light or one for the set)

Nøglefunktioner

• Høj lysstyrke: 3000 Lumens output with 236 super bright LEDs for extensive illumination.
• Justerbart design: Three adjustable heads allow for flexible lighting direction and a 270° wide-angle lighting area.
• Dobbeltbevægelsessensorer: Upgraded 2 smart PIR motion sensors provide a 180° detection angle within a range of 0-32 feet, offering wider and more sensitive coverage.
• Tre lystilstande: Customizable lighting modes to suit various needs (details in Operating Instructions).
• Holdbar og vejrbestandig: IP65 waterproof rating and high-strength ABS material ensure durability against various weather conditions (waterproof, heat-resistant, frost-resistant).
• Effektiv solopladning: Monocrystalline silicon glass panels with up to 50% conversion rate for efficient daytime charging.
• Langtidsholdbart batteri: Built-in 2000mAh large capacity battery for extended operation.
• Lang levetid: Designet til en levetid på over 50,000 timer.

Opsætning og installation

Installation is designed to be quick and easy, requiring no wiring. Follow these steps for optimal performance:

1. Vælg en placering: Select an outdoor location that receives direct sunlight for at least 6-8 hours daily to ensure the solar panel charges effectively. The recommended installation height is approximately 6.5 feet.
2. Monter beslaget: Use the provided screws and wall plugs to securely attach the wall bracket to your desired surface. Ensure the bracket is level.
3. Fastgør lyset: Slide the solar light unit onto the mounted wall bracket until it clicks securely into place.
4. Juster lyshoveder og solpanel: Adjust the three light heads to cover the desired illumination area. Position the solar panel to face the sun for maximum exposure throughout the day.

Installationsvideo

Video 1: This video demonstrates the unboxing and installation process for the MDCMDCM Solar Motion Lights Outdoor Waterproof.

Betjeningsvejledning

The solar light features three distinct lighting modes, which can be selected using the included remote control or the button on the unit. Ensure the light is turned on before selecting a mode.

• Mode 1 (Motion Activated 100% Brightness): The light remains OFF at night until motion is detected. Upon detection, it illuminates at 100% brightness for approximately 20 seconds, then turns OFF again.
• Mode 2 (Always 30% Brightness): The light stays ON at 30% brightness throughout the night, without motion sensor activation.
• Mode 3 (10% Brightness + Motion Activated 100% Brightness): The light stays ON at a dim 10% brightness at night. When motion is detected, it brightens to 100% for approximately 20 seconds, then returns to 10% brightness.

Opretholdelse

To ensure your MDCMDCM Solar Motion Sensor Outdoor Lights continue to function effectively, follow these simple maintenance guidelines:

• Rengør solpanelet: Tør solpanelet regelmæssigt af med en blød, tør klud.amp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient battery charging.
• Tjek montering: Periodically inspect the mounting screws and bracket to ensure the light remains securely attached to the surface. Tighten any loose screws as needed.
• Ryd forhindringer: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel or interfering with the motion sensor's detection range.

Fejlfinding

If your solar light is not performing as expected, consider the following common issues and solutions:

• Lyset tændes ikke om natten:
  • Ensure the light is switched ON.
  • Verify the solar panel is receiving sufficient direct sunlight (6-8 hours) during the day. Relocate if necessary.
  • Check if the battery is fully charged. Allow for a full day of charging before first use or after prolonged storage.
  • Confirm the selected operating mode is appropriate for your needs.
• Bevægelsessensor registrerer ikke:
  • Ensure the motion sensors are clean and free from obstructions.
  • Check the detection range and angle. The dual sensors offer 180° detection up to 32 feet.
  • Verify the light is in Mode 1 or Mode 3 for motion activation.
• Lyset er svagt eller flimrer:
  • The battery may not be fully charged. Ensure adequate sunlight exposure.
  • Rengør solpanelet for at forbedre opladningseffektiviteten.
  • Ekstreme temperaturer kan påvirke batteriets ydeevne.

Specifikationer

Garanti og support

MDCMDCM provides a Begrænset garanti for this product. Additionally, your purchase is backed by a 365 dages garanti, ensuring that your light will not break or stop working under normal use conditions. For any questions, technical support, or warranty claims, please refer to the contact information provided in the user manual included in your package or visit the official MDCMDCM store on Amazon.