EASYGUARD EC211PP-BM2-NFC-A Remote Starter User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your EASYGUARD EC211PP-BM2-NFC-A CAN Bus PKE Passive Keyless Entry Remote Starter. This system is designed to enhance the convenience and security of your compatible BMW vehicle by adding features such as passive keyless entry, remote engine start, and NFC card access. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Kontrolmodul
• Key Fobs (2 included)
• Ledningsnet
• Bypass modul
• HF antenne
• PKE Antenna
• NFC-kort

3. Kompatibilitet

This system is specifically designed for certain BMW models with a factory OEM push start button and automatic transmission (petrol/diesel engine). It is not compatible with manual transmission or hybrid versions. Your original key fob should be the trapezoid-shaped 3 or 4-button key.

Kompatible BMW-modeller:

• 7-serien: F01 (2008-2012), F02 (2008-2012), F03 (2009-2012), F04 (2010-2012)
• 6-serien: F06 (2011-), F12 (2012-2019), F13 (2011-2018)
• 5-serien: F07 GT (2009-), F10 (2010-2016), F11 (2011-2016), F18 (2010-2016)
• X-serien: X3 F25 (2011-2018), X4 F26 (2014-2018)

4. Funktioner

The EASYGUARD EC211PP-BM2-NFC-A system offers the following key features:

• Passiv nøglefri adgang (PKE): Automatically locks/unlocks car doors when you approach or walk away from the vehicle (within 3-6 feet) with the key fob.
• Fjernstart/stop af motor: Start or stop your vehicle's engine remotely to pre-cool in summer or pre-warm in winter.
• NFC Card Lock/Unlock: Use an NFC card to lock or unlock the car doors.
• Fjernbetjent bagagerumsudløser: Open the trunk remotely.
• Smartphone App Control & 4G LTE GPS Tracking (Optional): Upgrade with an additional GPS002-AA 4G LTE module for smartphone control and GPS tracking capabilities.

5. Opsætning

Professionel installation påkrævet: This item requires professional installation by a trained staff or certified alarm installer. The installation process involves integrating the bypass module with your car's original key fob PCB, which requires soldering. Improper installation can lead to damage to your vehicle or the system.

If you are unsure about the correct program or installation steps, please consult with EASYGUARD support or a professional installer before proceeding.

6. Betjeningsvejledning

6.1. Passiv nøglefri adgang (PKE)

With the key fob in your possession, the system will automatically unlock the car doors when you approach the vehicle within 3-6 feet. When you walk away from the vehicle (3-6 feet), the car doors will automatically lock.

6.2. Fjernbetjening til motorstart/-stop

To remotely start the car:

1. Ensure the car is in a locked/armed status.
2. Hold the siren icon button on the key fob for 3 seconds.

To remotely shut off the car:

1. Hold the siren icon button on the key fob again for 3 seconds.

6.3. NFC Card Access

Use the provided NFC card to lock or unlock your car doors by tapping it against the designated area on your vehicle (typically the windshield or door handle, as per installation). This feature also allows you to drive your car away after unlocking with the NFC card.

6.4. Remote Trunk Release

To release the trunk remotely, continue to press the trunk release button on your key fob twice.

6.5. Smartphone App Control (Optional)

If you have installed the optional GPS002-AA 4G LTE module, you can control your vehicle and track its location via a dedicated smartphone application. Refer to the GPS002-AA module's separate instructions for app setup and usage.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your EASYGUARD remote starter system, follow these maintenance guidelines:

• Hold komponenterne tørre: Avoid exposing the control module, key fobs, and NFC card to water or excessive moisture.
• Udskiftning af batteri: The key fobs require 2 CR2 batteries (included). Replace them when the signal strength weakens or the indicator light on the fob dims.
• Regelmæssig kontrol: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
• Professionel inspektion: Consider having the system professionally inspected during routine vehicle maintenance.

8. Fejlfinding

If you encounter issues with your EASYGUARD remote starter, consider the following common troubleshooting steps:

• Systemet svarer ikke: Check the key fob battery. Ensure you are within the operational range for PKE or remote start.
• Fejl ved fjernstart: Verify that the car doors are fully closed and locked. Ensure the vehicle's gear is in Park (P).
• NFC-kort virker ikke: Ensure the NFC card is correctly positioned over the sensor area. Check for any obstructions between the card and the sensor.
• Intermitterende drift: This could be due to electromagnetic interference. Try operating the system in a different location.
• Professionel assistance: For complex issues or if basic troubleshooting does not resolve the problem, contact a professional installer or EASYGUARD customer support.

9. Specifikationer

10. Garanti og support

Garanti: The EASYGUARD EC211PP-BM2-NFC-A comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Kundesupport: For technical assistance, troubleshooting, or warranty inquiries, please contact EASYGUARD customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.