1. Introduktion
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Sikkerhedsoplysninger
ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Installationen skal udføres af en kvalificeret elektriker eller en person med elektrisk viden.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Må ikke installeres i nærheden af brandfarlige materialer eller i områder med eksplosiv atmosfære.
- Se ikke direkte ind i LED-lyskilden, når den er tændt, da det kan forårsage øjenskader.
- Sørg for, at monteringsfladen kan bære armaturets vægt.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- LED Security Light Fixture (Model BDB100G-3)
- Monteringsudstyr (skruer, trådmøtrikker)
- Instruktionsmanual
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | BDB100G-3 |
| Wattage | 100W |
| Lysstyrke | 9000 lumen |
| Farvetemperatur | 6000K (dagslys hvid) |
| Voltage | 120 volt |
| Bevægelsessensorvinkel | 180° |
| Rækkevidde for bevægelsesdetektering | 16.4 ft - 72 ft (5m - 22m) |
| Lighting Time Adjustment | 10 sekunder - 7 minutter |
| Vandmodstandsvurdering | IP65 |
| Materiale | Die-cast Aluminum, Plastic |
| Dimensioner (L x B x H) | 38.8 cm x 20.8 cm x 11.9 cm (15.3" x 8.2" x 4.7") |
| Vægt | 4.4 lbs (2 kg) |
| Monteringstype | Wall Mount & Soffit Mount |
| Ideal Mounting Height | 10 ft - 16.4 ft (3m - 5m) |
5. Opsætning og installation
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Komponenter overview
Billede 5.1: Eksploderet view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Montering af armaturet
- Forbered monteringsoverfladen: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view of the desired detection area.
- Fastgør monteringsbeslag: Secure the provided mounting bracket to the junction box using the included screws.
- Ledningsforbindelser: Connect the household wiring to the fixture's wires. Typically, this involves:
- Sort (Live) til Sort (Live)
- Hvid (Neutral) til hvid (Neutral)
- Green/Bare Copper (Ground) to Green (Ground)
- Sikre armaturet: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Adjusting Light Heads and Sensor
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Betjeningsvejledning
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Indstillinger for bevægelsessensor
The motion sensor has three adjustable dials:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCE (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- TID: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Determines the ambient light level at which the sensor becomes active.
- Day Mode (Sun icon): Motion detection works during both day and night.
- Night Mode (Moon icon): Motion detection works only at night or in low-light conditions.
6.2 Optimal ydeevne
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Vedligeholdelse
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Rengøring
- Ensure the power is OFF before cleaning.
- Tør armaturet af med en blød kludamp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige finishen eller linsen.
- Hold bevægelsessensorens linse ren og fri for forhindringer (f.eks. snavs, edderkopwebs) to ensure proper operation.
7.2 Vejrbestandighed
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
8. Fejlfinding
If you experience issues with your security light, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning. LUX setting is too low (Night Mode during daytime). Bevægelsessensor blokeret eller defekt. | Kontroller afbryderen og ledningsforbindelserne. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| Lyset forbliver tændt konstant. | Kontinuerlig bevægelse i detektionsområdet. TIME-indstillingen er for lang. Sensorfejl. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Juster TIME-drejeknappen til en kortere varighed. Hvis problemet fortsætter, skal du kontakte kundesupport. |
| Lyset tændes for ofte eller ikke nok. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| Lysudbyttet er svagt eller ujævnt. | Effektudsving. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Løs montering. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Garanti
This Onforu product is covered by a 2 års begrænset garanti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede ændringer.
Gem venligst dit købsbevis for garantikrav.
10. Kundesupport
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu webwebsted for kontaktoplysninger.
Online support: Besøg Onforu-butikken på Amazon