Memphis Audio SRX693V

Memphis Audio SRX693V 6x9 Inch 3-Way Coaxial Speakers

Instruktionsmanual

Indledning

This manual provides essential information for the proper installation, operation, and maintenance of your Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speakers. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.

Sikkerhedsoplysninger

  • Frakobl altid bilens negative batteripol, inden du påbegynder elektrisk arbejde.
  • Sørg for, at alle ledninger er korrekt isoleret for at forhindre kortslutninger.
  • Monter højttalerne sikkert for at forhindre, at de løsner sig under brug af køretøjet.
  • Avoid installing speakers in locations that obstruct vehicle safety features or driver visibility.
  • Kontakt en professionel installatør af bilstereo, hvis du er usikker på installationstrinnene.

Pakkens indhold

The package for your Memphis Audio SRX693V speakers should contain the following items:

  • SRX693V 6x9 Inch 3-Way Coaxial Speakers (Pair)

Specifikationer

MærkeMemphis lyd
ModelnavnSRX693V
Højttaler typeKoaksial
Højttaler størrelse9 Inches (6x9 inch oval)
Højttaler Maksimal udgangseffekt110 watt
ForbindelsesteknologiKoaksial
MonteringstypeFlush Mount
Varedimensioner (D x B x H)9.8" D x 7.3" B x 7.4" H
Varens vægt5.4 pund
KegelmaterialePolypropylen
Diskant-materialePEI
SurroundmaterialeGummi

Opsætning og installation

Proper installation is crucial for optimal sound quality and speaker longevity. Follow these general steps:

  1. Forberedelse: Disconnect the vehicle's battery. Identify suitable mounting locations for the 6x9 inch speakers, typically in door panels or rear deck. Ensure adequate clearance for the speaker's depth.
  2. Montering: If replacing existing speakers, remove the old units. Use the provided template (if available) or the speaker itself to mark and cut the mounting hole if necessary. Secure the speakers using appropriate screws and mounting hardware.
  3. Ledningsføring: Connect the speaker wires to your vehicle's audio system. Pay close attention to polarity (+ to + and - to -) to ensure correct phase and sound reproduction. The SRX693V speakers are designed for coaxial connection.
  4. Test: Reconnect the vehicle's battery. Turn on your audio system at a low volume to test the speakers. Gradually increase the volume and check for clear sound from both speakers.
  5. Efterbehandling: Reassemble any removed panels or grilles.
Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, front view

Figur 1: Forside view of the Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker.

Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, angled view showing cone and tweeters

Figur 2: Vinklet view of the SRX693V speaker, highlighting the polypropylene cone and PEI tweeters.

Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, side profile showing mounting depth

Figur 3: Sideprofile of the SRX693V speaker, illustrating its slim mounting depth.

Bag view of the Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, showing the magnet and terminals

Figur 4: Bagside view of the SRX693V speaker, showing the magnet structure and wiring terminals.

Betjeningsvejledning

Once installed, your Memphis Audio SRX693V speakers will operate as part of your vehicle's audio system. For optimal performance:

  • Lydkilde: Sørg for, at din hovedenhed eller amplifier is properly configured to send audio signals to the speakers.
  • Lydstyrkekontrol: Adjust the volume to a comfortable listening level. Avoid prolonged listening at excessively high volumes to prevent speaker damage and hearing loss.
  • Udligning: Use your audio system's equalizer settings to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
  • Indbrudsperiode: Allow a short break-in period (typically a few hours of normal use) for the speaker components to settle, which can improve sound quality.

Opretholdelse

Your Memphis Audio SRX693V speakers require minimal maintenance:

  • Rensning: Tør forsigtigt højttalergitrene og -rammerne af med en blød, tør klud for at fjerne støv. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
  • Inspektion: Periodically check the speaker mounts and wiring connections to ensure they remain secure.
  • Miljøfaktorer: Selvom højttalerne er designet til brug i biler, skal de undgås at udsættes for overdreven fugtighed eller ekstreme temperaturer.

Fejlfinding

If you encounter issues with your speakers, consider the following:

ProblemMulig årsagLøsning
Ingen lyd fra højttalerneLoose wiring connection, incorrect polarity, amplifier issue, head unit settings.Kontroller alle ledningsforbindelser for tæthed og korrekt polaritet. Bekræft ampForstærkeren og hovedenheden er tændt og konfigureret korrekt.
Forvrænget lydOver-driving speakers (volume too high), incorrect amplifier gain settings, damaged speaker.Reducer lydstyrken. Juster amplifier gain settings. Inspect speaker cone and surround for visible damage.
En højttaler virker ikkeLoose connection to that specific speaker, damaged speaker wire, faulty speaker.Check wiring for the non-working speaker. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/source.

Garanti og support

Your Memphis Audio SRX693V speakers are covered by a 1 års producentgaranti. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or further assistance, please contact Memphis Audio customer service or visit their official webwebsted. Gem din købsbevis for at validere garantien.

© 2026 Memphis Audio. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.