Temank 3000W Solar Inverter User Manual

1. Introduktion og overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Temank 3000W Low-Frequency Pure Sine Wave Solar Inverter. This advanced inverter charger features a built-in 60A MPPT controller and a 38A AC charger, designed to support various battery types including lead-acid and lithium, and can be charged via utility, generator, or solar power. Its robust low-frequency design ensures unparalleled reliability and stability for your power needs.

Figur 1.1: Forside view of the Temank 3000W Solar Inverter, showcasindens display og betjeningselementer.

2. Sikkerhedsinstruktioner

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in serious injury, damage to the inverter, or property damage.

• Ensure all power sources (solar, utility, battery) are disconnected before performing any wiring or maintenance.
• This inverter generates high voltage. Kun kvalificeret personale bør udføre installation og ledningsføring.
• Sørg for korrekt jordforbindelse af inverteren for at forhindre elektrisk stød.
• Do not expose the inverter to rain, snow, liquids, or excessive dust.
• Sørg for tilstrækkelig ventilation omkring inverteren for at forhindre overophedning.
• Skil ikke inverteren ad. Der er ingen dele indeni, som brugeren kan servicere.

3. Produktfunktioner

• Low-Frequency Pure Sine Wave Output: Giver stabil og ren strøm, der er egnet til følsom elektronik.
• High Peak Power: Capable of 9000W peak power, three times its rated 3000W, ideal for handling high-load applications and sudden power surges.
• Integreret MPPT-controller: Built-in 60A MPPT solar charge controller maximizes power harvest from solar panels.
• Versatile AC Charger: Features a 38A AC charger for charging batteries from utility grid or generator.
• Bred batterikompatibilitet: Supports LiCoMnNiO2, LiFePO4, AGM, Gel, User, and Flooded 24V batteries.
• Multiple Charging/Output Modes: Offers Utility Priority, Solar Priority, and Only Solar charging modes, along with corresponding output modes for flexible power management.
• Avancerede beskyttelser: Includes comprehensive system protections, battery circuit fuses, and communication options (RS232/RS482) for monitoring and BMS integration.
• Effektiv køling: Intelligent variable speed fan ensures efficient heat dissipation and extends system life.
• Fast UPS Function: Ultra-fast 10ms UPS ensures uninterrupted operation, safeguarding connected equipment.

Figur 3.1: Overview of the inverter's key specifications and features.

Figure 3.2: Illustration of the robust toroidal transformer, contributing to the inverter's reliability and surge capacity.

Figure 3.3: Visual representation of the three selectable battery charging modes (Utility Priority, Solar Priority, Only Solar) and three output modes (Utility Priority, Solar Priority, Inverter Priority).

Figure 3.4: Display of compatible 24V battery types, including Lithium (Li), Gel, AGM, SLD, and FLD.

Figur 3.5: Eksample of the inverter's capability to handle various household and office loads, including air conditioners, motors, refrigerators, and washing machines, with its 3000W continuous and 9000W peak power.

Figure 3.6: Visual details highlighting the inverter's 90%+ conversion efficiency, clear LCD HD display, efficient cooling fan, and pure sine wave output.

4. Pakkens indhold

Ved udpakning skal du kontrollere, at alle nedenstående varer er inkluderet og ubeskadigede:

• Temank 3000W Low-Frequency Solar Inverter Unit
• Brugermanual
• Communication Cable (RS232)
• Monteringsbeslag og skruer
• Battery Terminal Connectors

Figure 4.1: Contents of the product package, including the inverter, manual, cables, and mounting hardware.

5. Opsætning og installation

Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the wiring diagram below for connections.

5.1. Valg af sted

• Installer inverteren på et køligt, tørt og godt ventileret sted.
• Avoid direct sunlight, heat sources, and flammable materials.
• Ensure the mounting surface can support the inverter's weight (44 pounds).

5.2. Ledningsforbindelser

All wiring must comply with local electrical codes and regulations. Use appropriate wire gauges for all connections.

1. Batteriforbindelse: Connect the 24V battery bank to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative). Recommended battery capacity: 200AH. Battery wire: 2AWG.
2. Solpaneltilslutning: Connect your solar panel array (Max PV Input: 1600W, 150V VOC) to the PV input terminals. PV wire: 10AWG.
3. AC-indgangsforbindelse: Connect the utility grid or generator (120Vac±5%, 50Hz/60Hz) to the AC input terminals. Max AC Charging Current: 38A. AC wire: 7AWG.
4. AC-udgangstilslutning: Connect your loads (AC Output Power: 3000W, Rate Voltage: 110Vac±10%) to the AC output terminals. AC wire: 10AWG.
5. Jording: Ensure the inverter is properly grounded to a reliable earth ground.

Figure 5.1: Comprehensive wiring diagram showing connections for solar panels, battery, AC input (utility/generator), and AC output (loads).

6. Betjeningsvejledning

6.1. Første opstart

1. After all connections are secure, turn on the battery breaker.
2. Turn on the inverter's power switch. The LCD screen will illuminate.
3. If connecting to utility/generator, turn on the AC input breaker.
4. Turn on the solar panel breaker (if applicable).

6.2. LCD-skærm og knapper

The LCD screen displays real-time operating status, input/output voltages, battery status, and error codes. Use the LCD buttons (ESC, UP, DOWN, ENTER) to navigate menus and adjust settings.

6.3. Charging and Output Modes

The inverter offers three selectable battery charging modes and three load output working modes:

• Opladningsmetoder:
  • Prioritet af forsyningsvirksomheder: Battery is primarily charged by utility/generator. Solar acts as a supplementary source.
  • Solprioritet: Battery is primarily charged by solar. Utility/generator acts as a supplementary source.
  • Kun solenergi: Battery is charged exclusively by solar power.
• Outputtilstande:
  • Prioritet af forsyningsvirksomheder: Loads are primarily powered by utility. Inverter switches to battery/solar only when utility is unavailable.
  • Solprioritet: Loads are primarily powered by solar and battery. Inverter switches to utility when solar/battery is insufficient.
  • Inverterprioritet: Loads are primarily powered by the inverter (battery/solar). Utility is used only when battery voltage drops to a low warning point.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din inverters levetid og optimale ydeevne.

• Rensning: Rengør jævnligt inverterens yderside med en tør klud. Sørg for, at ventilationsåbningerne er fri for støv og snavs.
• Forbindelseskontrol: Kontrollér årligt alle ledningsforbindelser for tæthed og korrosion. Efterspænd om nødvendigt.
• Batteriinspektion: Følg batteriproducentens vedligeholdelsesvejledning for din specifikke batteritype.
• Miljøtjek: Sørg for, at installationsmiljøet forbliver inden for de angivne temperatur- og fugtighedsintervaller.

8. Fejlfinding

Dette afsnit indeholder løsninger på almindelige problemer, du kan støde på. Ved problemer, der ikke er nævnt her, bedes du kontakte kundesupport.

9. Specifikationer

10. Garanti og support

Temank products are designed for reliability and performance. For warranty information, please refer to the documentation provided with your purchase or contact Temank customer support directly.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official Temank website or contact their customer service team. Keep your purchase receipt and model number handy for faster service.

Online support: Visit the Temank Store on Amazon