GoolRC 2.4GHz RC Gasboat Remote Control Boat Instruction Manual

1. Produktet er slutview

The GoolRC 2.4GHz RC Gasboat is a remote control boat designed for use in swimming pools and lakes. It features LED lights, a water shooting function, and 2.4GHz remote control technology for precise and interference-free operation. This manual provides essential information for safe and enjoyable use of your RC boat.

Image 1: The GoolRC RC Gasboat demonstrating its water shooting capability and LED lights.

2. Pakkens indhold

Sørg venligst for, at alle varer er til stede i pakken:

• Fjernbetjening båd
• Fjernbetjening
• Boat Battery (Rechargeable 3.7V)
• USB opladningskabel
• Lille skruetrækker (til batterirummet)

3. Opsætning og batteriinstallation

3.1. Boat Battery Installation and Charging

1. Loosen the main battery compartment screws on the bottom of the boat using the provided screwdriver.
2. Åbn batteridækslet.
3. Connect the rechargeable 3.7V battery to the boat's connector socket, ensuring correct polarity.
4. Luk batteridækslet og spænd skruerne.
5. Connect the boat battery to the USB charging cable. Plug the USB cable into a 5.0V 2A power supply (e.g., USB mobile phone charger, computer USB interface).
6. Charge for approximately 2-3 hours. The USB charger may become slightly warm during charging, which is normal.
7. Advarsel: The independent battery module is waterproof. However, do not place the toy in water if the battery is not correctly installed or if it is not installed at all, to avoid damage due to water ingress.

Image 2: Detailed diagram for installing the rechargeable battery in the boat and connecting the USB charging cable.

3.2. Installation af batteri i fjernbetjening

1. Loosen the screws on the remote controller's battery compartment cover.
2. Insert two 1.5V AA non-rechargeable batteries, observing correct polarity.
3. Luk batteridækslet og spænd skruerne.
4. Forsigtighed: Bland ikke nye og gamle batterier eller forskellige typer batterier.

Image 3: The remote controller for the GoolRC RC Gasboat, showing its design and controls.

4. Betjeningsvejledning

4.1. Pairing the Boat and Remote Control

1. Place the boat in water. The boat's headlight will flash.
2. Turn on the remote control. The remote control indicator light will turn on, and the boat's headlight will stop flashing, indicating successful pairing.
3. If the red light of the front indicator keeps flashing, pairing has failed. Remove the toy from the water, turn off the remote control, and repeat the pairing process.

4.2. Grundlæggende kontroller

Use the joysticks on the remote control to navigate the boat:

• Venstre joystick: Styrer bevægelse fremad og bagud.
• Højre joystick: Styrer drejning til venstre og højre.
• The boat features double propellers for full power and multi-directional control.

Image 4: The underside of the RC Gasboat, highlighting its double propeller system for enhanced maneuverability.

4.3. Særlige funktioner

• Water Shooting Function: Press the designated button on the remote control to activate the water shooting feature. Water jetting duration is 20 seconds.
• Demo med ét klik: Press the one-click demo button on the remote control for an automatic demonstration of the boat's swimming process and capabilities.
• LED lys: The boat is equipped with LED lights for enhanced visibility and visual appeal, especially during night operation.

Image 5: The RC Gasboat with its LED lights active, showcasindens design.

4.4. Water Sensing Feature

The boat is equipped with a water sensing switch. The motor will only activate when the bottom of the toy touches the water. It will stop running once taken out of the water, conserving battery life and preventing accidental operation.

5. Important Safety and Usage Notes

• Operate only in calm, clear water. Pools and shallow lakes are recommended. Avoid turbulent water flow or areas with water grass, floating objects, or other obstacles to prevent damage or accidents.
• Always maintain focus and avoid collisions with other boats or swimmers.
• Pay attention to the speed and control of the boat to avoid personal injury or property damage.
• After each use, wipe the boat with a soft cloth and allow it to air dry completely before storage.
• Do not operate near concrete walls or other sources of electromagnetic interference.
• This product is designed for operation in fresh water. Do not submerge the boat for a long time.
• Max 10 spillere ad gangen.
• The toy must not be used by children under age 3 due to small parts.
• This rechargeable battery is non-replaceable. It can only be charged under adult supervision.
• Regularly check the USB charger for any damage. Discontinue use if damaged.
• Disconnect the USB charger before cleaning the toy.
• Do not disassemble or throw batteries into fire or water.

Image 6: Illustration of the waterproof design features, including the battery cover and sealing ring on the remote control, ensuring protection against water ingress.

6. Specifikationer

Image 7: Visual representation of the GoolRC RC Gasboat and remote control with their respective dimensions.

7. Vedligeholdelse og pleje

• After each use, remove the boat from the water, wipe it dry with a soft cloth, and allow it to air dry completely before storage.
• Ensure the battery compartment is securely closed after each use to prevent water damage.
• Opbevar båden og fjernbetjeningen et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• If the toy will not be used for an extended period, remove all batteries from both the boat and the remote control.

8. Fejlfinding

• Båden svarer ikke:
  • Sørg for, at både båden og fjernbetjeningen er tændt.
  • Check if the batteries in both devices are correctly installed and charged.
  • Gentag parringsprocessen (afsnit 4.1).
  • Ensure the boat is in water to activate the water sensing switch.
• Weak water spray:
  • Check the boat's battery level and recharge if necessary.
  • Ensure the water intake for the spray function is not blocked.
• Limited range or interference:
  • Avoid operating near concrete walls or other sources of electromagnetic interference.
  • Ensure no other 2.4GHz devices are operating nearby that could cause interference.

9. Garanti og support

For warranty information, technical support, or replacement parts, please contact GoolRC customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.