TOWILD TL03 Bicycle Tail Light Instruction Manual

Produkt overview

The TOWILD TL03 is a smart bicycle tail light designed to enhance cycling safety. It features intelligent brake detection, automatic light sensing, and multiple lighting modes, all powered by a rechargeable USB-C battery with an IPX6 waterproof rating.

Nøglefunktioner

Brake Warning Function (ON/OFF): Manually enable or disable the brake light feature. When activated, the light illuminates at maximum brightness during braking to alert traffic behind you. To toggle, long-press the switch for 3 seconds when the power is on. The light will flash 3 times to indicate the change.
Light Sensor & Vibration Detection: Equipped with a smart chip, the light automatically turns on in dark environments (e.g., tunnels) and turns off in bright conditions during the day. The vibration sensor automatically turns the light on when movement is detected and off after 120 seconds of no vibration, conserving battery.
5 lystilstande: Choose from Strobe, Rapid Flash, Breathing Flash, Flash, and Constant modes to suit various riding conditions.
IPX6 Vandtæt: Designed with high-density ABS material, ensuring reliable performance in rain and harsh weather conditions.
USB-C genopladelig: Features a 300mAh built-in battery with USB-C charging, eliminating the need for frequent battery replacement. Fully charges in approximately 2 hours.
Batteriniveauindikator: Four red indicator lights show the battery status (0-25%, 25-50%, 50-75%, 75-100%) when the device is powered on.
Nem installation: Tool-free installation with included rubber bands, allowing mounting on seat rails or seat posts.

Opsætning og installation

The TOWILD TL03 tail light offers two primary installation methods: on the saddle rail or on the seat post. Both methods are tool-free and utilize the provided rubber bands.

Mounting on Saddle Rail

Attach the light's bracket to the saddle rail using the provided tie-wrap band.
Rotate the main body of the light clockwise by 90 degrees to secure it to the bracket.
Installationen er fuldført.

Mounting on Seat Post

Combine the light's bracket with the seat post fixing rubber band.
Secure the bracket to the seat post using the rubber band.
Rotate the main body of the light clockwise by 90 degrees to secure it to the bracket.
Installationen er fuldført.

Two images showing installation methods for the TOWILD TL03 bicycle tail light. One shows mounting on a saddle rail, the other on a seat post. — The TOWILD TL03 can be easily installed on either the bicycle's saddle rail or seat post without the need for tools, using the included rubber bands.

Operation

Tænd/sluk: Long-press the switch for 0.5 seconds to turn the light on or off.
Skift belysningstilstande: With the power on, single-click the switch to cycle through the five lighting modes.
Toggle Smart Mode / Manual Mode: With the power on, double-click the switch to switch between Smart Mode and Manual Mode.
Brake Function ON/OFF: With the power on, long-press the switch for 3 seconds. The light will flash 3 times, and the brake function will turn off. To turn it back on, long-press the switch for 3 seconds again; the light will flash 3 times, and the brake function will resume.

Image showing the TOWILD TL03 tail light mounted under a bicycle seat, with text describing how to operate the light's functions. — The image illustrates the various operational controls for the TOWILD TL03, including power on/off, mode switching, and toggling the smart/manual and brake functions.

Automatic Light Sensing

The integrated high-sensitivity light sensor automatically detects ambient light conditions. In Smart Mode, the light will turn off when it's bright (daytime) and automatically turn on when it's dark (nighttime or entering a tunnel).

Image showing a cyclist with the TOWILD TL03 tail light, illustrating how the light sensor works by automatically turning on in dark conditions and off in bright conditions. — The light sensor feature ensures the tail light operates efficiently, automatically adjusting to ambient light for optimal visibility.

Vibration Detection (Auto ON/OFF)

The smart chip includes a vibration sensor. When in Smart Mode, the light will automatically turn on when it detects movement. If no vibration is detected for 120 seconds, the light will automatically turn off to save battery. It will reactivate upon sensing vibration again.

Image demonstrating the vibration sensor of the TOWILD TL03 tail light, showing it turning on with movement and off when stationary. — The vibration sensor intelligently manages power, turning the light on during rides and off when stationary to conserve battery life.

Opladning og batteri

The TOWILD TL03 is equipped with a 300mAh internal battery and supports USB-C fast charging. A full charge takes approximately 2 hours.

Batteriniveauindikator

When the device is powered on, four red indicator lamps display the current battery level:

En lamp: 0-25% batteri
To lamps: 25-50% batteri
Tre lamps: 50-75% batteri
Fire lamps: 75-100% batteri

Image showing the TOWILD TL03 tail light with a visual representation of its four-segment battery indicator. — The battery indicator provides a clear visual cue of the remaining power, helping users manage charging effectively.

Lighting Modes and Runtimes

The TL03 offers five distinct lighting modes, each with varying runtimes. Please note that the listed runtimes are test values with the brake function OFF. Actual runtimes may vary depending on the frequency of brake activation when the brake function is ON.

Outputtilstand	Kørselstid (ca.)
Strobe flash	36 timer
Hurtig flash	30 timer
Åndedrætsflash	30 timer
Blitz	32 timer
Konstant Lys	18 timer

Note: The above runtimes are tested with the brake function OFF. When the brake function is ON, the runtime will vary depending on the frequency of braking. Higher braking frequency will result in shorter runtimes.

Image displaying the five lighting modes of the TOWILD TL03 tail light and their approximate runtimes. — The TOWILD TL03 offers five versatile lighting modes to enhance visibility and safety during various cycling conditions.

Vandmodstand

The TOWILD TL03 tail light boasts an IPX6 waterproof rating. This means it is protected against high-pressure water jets from any direction, making it suitable for use in rainy weather and on bumpy roads without concerns about water damage or malfunction.

Image showing the TOWILD TL03 tail light being splashed with water, demonstrating its IPX6 waterproof capability. — The IPX6 waterproof rating ensures the TOWILD TL03 remains functional and durable even when exposed to rain or splashes.

Pakkens indhold

Upon opening your TOWILD TL03 package, you should find the following items:

1 x TL03 Tail Light
1 x Light Bracket
1 x USB-C opladningskabel
3 x Tie-wrap Bands
1 x Anti-slip Pad (for seat post)
2 x gummibånd
1 x brugsanvisning

Image showing all items included in the TOWILD TL03 bicycle tail light package, including the light, mounts, cable, and manual. — The complete package contents for the TOWILD TL03 tail light, ensuring you have everything needed for installation and use.

Produktdimensioner

The TOWILD TL03 tail light has compact dimensions, making it suitable for various bicycle types.

Længde: 37 mm
Bredde: 37 mm
Højde: 23 mm
Vægt: 20 gram

Diagram showing the dimensions of the TOWILD TL03 bicycle tail light, including length, width, and height in millimeters. — Detailed dimensions of the TOWILD TL03 tail light, illustrating its compact and lightweight design.

Specifikationer

Specifikation	Detalje
Mærke	TOWILD
Modelnummer	TL03
Farve	Sort
Strømkilde	Batteridrevet (USB-C genopladelig)
Vandmodstandsniveau	IPX6
Produktets vægt	20 gram
Monteringstype	Seat Post Mount / Saddle Rail Mount
Produktmål (L x B x H)	37 mm x 37 mm x 23 mm
Antal indstillinger/tilstande	5

Fejlfinding

If you encounter any issues with your TOWILD TL03 tail light, please refer to the following common troubleshooting tips:

Lyset tænder ikke: Ensure the battery is charged. Connect the light to a USB-C power source and check the battery indicator. Long-press the power button for 0.5 seconds to turn it on.
Light not responding to movement (Smart Mode): Double-check that the light is in Smart Mode. If it is, ensure there is sufficient vibration to trigger the sensor.
Brake light not activating: Verify that the brake warning function is enabled (long-press for 3 seconds to toggle). Ensure the light is securely mounted and can detect deceleration.
Kort batterilevetid: Runtimes vary by mode. Ensure you are using a mode appropriate for your desired duration. Frequent brake activations in modes with the brake function enabled will reduce overall runtime.

If these steps do not resolve your issue, please contact TOWILD customer support for further assistance.

Garanti og support

The TOWILD TL03 Bicycle Tail Light comes with a 2 års producentgaranti. If you experience any product defects or issues within this period, please contact TOWILD customer support. They will be able to provide assistance and guidance regarding warranty claims or product inquiries.

For support, please refer to the contact information provided in your product packaging or visit the official TOWILD webwebsted.

TOWILD TL03