ARREGUI 650110 Electronic Steel Safe User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your ARREGUI 650110 Electronic Steel Safe. Please read this manual carefully before using the safe to ensure proper function and security. This safe is designed for securing valuables in home or office environments.

Figur 1: Forside view of the ARREGUI 650110 Electronic Steel Safe, showing the electronic keypad and rotary knob.

2. Sikkerhedsoplysninger

Always follow these safety guidelines to prevent injury or damage to the safe:

• Do not store the emergency keys inside the safe. Keep them in a secure location outside the safe.
• Sørg for, at pengeskabet er sikkert monteret på en væg, hylde eller gulv for at forhindre uautoriseret fjernelse.
• Keep the safe away from extreme temperatures and humidity.
• Brug kun AA 1.5V alkaline batteries for power. Do not mix old and new batteries or different types of batteries.
• If the safe will not be used for an extended period, remove the batteries to prevent leakage.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• ARREGUI 650110 Electronic Steel Safe
• Emergency Keys (2 units)
• Monteringsskruer
• Instruktionsmanual (dette dokument)

4. Installation

The safe is designed for easy installation and can be fixed to a wall, shelf, or floor. Fixing the safe is highly recommended to reduce the risk of theft.

1. Vælg en placering: Select a discreet and secure location for your safe.
2. Markér borepunkter: The safe has pre-drilled holes (2 at the base and 2 on the back, 9mm diameter). Position the safe and mark the drilling points on the desired surface.
3. Bore huller: Drill holes at the marked points using an appropriate drill bit for your surface (e.g., masonry bit for concrete, wood bit for wood).
4. Sikr pengeskabet: Align the safe's holes with the drilled holes. Insert the provided mounting screws and tighten them securely.

Figur 2: Interiør view of the safe with the door open, showing the pre-drilled mounting holes on the back and base.

5. Betjeningsvejledning

5.1. Strømforsyning

The safe is powered by 4 x AA 1.5V alkaline batterier (not included). The battery compartment is located on the inside of the safe door. Insert the batteries according to the polarity indicators (+/-).

A red LED light on the keyboard will illuminate to warn you when the batteries are low and need replacement.

5.2. Setting Programmable Codes

The safe features two programmable opening codes: a master kode og en brugerkode. Both codes can be 3 to 6 digits long, offering 1 million possible combinations.

Refer to the specific instructions provided on a separate sheet or within the safe for the exact procedure to set or change these codes, as it typically involves pressing a reset button inside the safe and then entering the new code on the keypad.

5.3. Opening the Safe with Electronic Lock

1. Enter your programmed mestre or brugerkode on the electronic keypad.
2. If the code is correct, a green LED will light up.
3. Within 5 seconds, turn the rotary knob clockwise to open the safe door.

If three incorrect codes are entered consecutively, the safe's lock will temporarily activate a protective mode, preventing further attempts for a short period.

5.4. Nødåbning

In case of forgotten code, worn-out batteries, or keypad malfunction, the safe can be opened using the emergency key.

1. Find nødnøglehullet, som normalt er skjult bag et lille dæksel på tastaturpanelet.
2. Sæt en af ​​de medfølgende nødnøgler i nøglehullet.
3. Turn the key clockwise while simultaneously turning the rotary knob to open the safe door.
4. Once the safe is open, you can replace the batteries or reset the code as needed.

Figure 3: The safe door open with an emergency key inserted into the hidden keyhole, demonstrating the manual override function.

6. Vedligeholdelse

• Udskiftning af batteri: Replace batteries promptly when the low battery warning LED illuminates. Always replace all four batteries at once.
• Rensning: Rengør ydersiden af ​​pengeskabet med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Tastaturpleje: Keep the keypad dry and free from dust. Avoid pressing the buttons with excessive force.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

Each ARREGUI safe has a uniquely engraved serial number. This serial number is crucial for ordering replacement parts, such as duplicate emergency keys (model 65LLE), if they are lost.

For further assistance or to inquire about replacement parts, please refer to the contact information provided with your purchase documentation or visit the official ARREGUI webwebsted.