Ledvion Modern Solar Wall Lamp Instruktionsmanual

Indledning

Thank you for choosing the Ledvion Modern Solar Wall Lamp. This solar-powered LED wall lamp features a motion sensor and a dusk-to-dawn switch, providing efficient and automatic outdoor lighting. Designed for durability with an IP65 rating, it is suitable for various outdoor environments such as gardens, patios, and pathways. Please read this manual carefully before installation and use to ensure proper function and longevity of your product.

Sikkerhedsoplysninger

• Ensure the mounting surface is stable and can support the weight of the lamp.
• Forsøg ikke at adskille eller ændre produktet, da dette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
• Hold solpanelet rent for at sikre optimal opladningseffektivitet.
• Undgå at installere lamp in shaded areas where direct sunlight is limited, as this will affect charging performance.
• Dette produkt er designet til udendørs brug og er IP65-klassificeret til vand- og støvafvisende egenskaber. Undgå dog at nedsænke det i vand.
• Dispose of the battery and product according to local regulations at the end of their lifespan.

Pakkens indhold

Kontroller, at alle komponenter er til stede før installation:

• 1x Ledvion Modern Solar Wall Lamp (White, 8W, 3000K)
• Monteringsskruer og vægdyvler
• Instruktionsmanual

Produktegenskaber

• Solcelledrevet: Utilizes solar energy for charging, offering zero electricity cost.
• Bevægelsessensor: Integrated PIR motion sensor with a 120° detection angle and up to 6 meters detection range.
• Dusk-to-Dawn Switch: Tænder automatisk i skumringen og slukker ved daggry.
• Høj lysstyrke: Giver 220 lumen varmt hvidt lys (3000K).
• Holdbart design: IP65 rated for water and dust resistance, made from ABS + PC material, anti-UV and fireproof.
• Lang batterilevetid: Built-in battery designed for 6-10 years lifespan.
• Effektivt solpanel: High-quality solar panel with a lifetime of up to 20 years.
• Front and Backlight: Provides illumination from both front and back.

Opsætning og installation

1. Vælg placering: Select a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging. Avoid areas under eaves, trees, or other obstructions that may cast shadows on the solar panel.
2. Markér borepunkter: Hold lamp against the desired mounting surface and mark the positions for the mounting screws.
3. Bore huller: Bor huller på de markerede steder med et passende bor til din vægtype. Sæt rawlplugsene i de borede huller.
4. Monter Lamp: Juster lamp's mounting holes with the wall plugs and secure it firmly with the provided screws. Ensure the lamp is stable and securely attached.

Billede: Bagside view of the Ledvion Solar Wall Lamp, illustrating the mounting points for installation.

Image: Detailed dimensions of the Ledvion Solar Wall Lamp, showing length, width, and height.

Betjeningsvejledning

The Ledvion Solar Wall Lamp operates automatically based on ambient light and motion detection.

Initial Activation and Charging

Upon first use, ensure the lamp is exposed to direct sunlight for at least 8-10 hours to fully charge the battery. The lamp will automatically turn on at dusk and off at dawn once charged.

Lystilstande

Væggen lamp can be set to two different modes:

• Tilstand A: Full Brightness upon motion detection. After motion ceases, the light dims to 3% brightness.
• Tilstand B: Full Brightness upon motion detection. After motion ceases, the light remains at 50% brightness for 5 hours, then dims to a lower level or turns off (depending on remaining battery).

Image: Illustration of the two available light modes for the Ledvion Solar Wall Lamp.

Motion Sensor and Dusk-to-Dawn Functionality

The integrated PIR motion sensor detects movement within its 120° angle and up to 6 meters. The dusk-to-dawn sensor ensures the lamp only operates when ambient light levels are low enough, conserving battery life during the day.

Image: Details of the motion sensor and twilight switch, highlighting the 120° sensor angle and 6-meter detection range.

Driftstid

When the battery is fully charged, the solar lamp can operate for up to 30 hours, depending on the selected mode and frequency of motion detection. The duration of illumination is directly dependent on the amount of sunlight received for charging. During darker winter months, charging efficiency may be reduced, affecting operation time.

Billede: Visuel repræsentation af l'etamp's long operation time, up to 30 hours on a full charge.

Opretholdelse

• Rengøring af solpanelet: Tør solpanelet regelmæssigt af med en blød, tør klud.amp klud til at fjerne støv, snavs eller affald. Et rent panel sikrer maksimal absorption af sollys og opladningseffektivitet.
• Generel rengøring: Rengør lamp housing with a soft, dry or slightly damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Periodically check the mounting screws to ensure the lamp remains securely attached to the wall.

Image: The durable solar panel of the Ledvion lamp, designed for long-term performance.

Image: The Ledvion Solar Wall Lamp demonstrating its IP65 rating, indicating protection against water splashes and dust.

Fejlfinding

Specifikationer

Image: Information about the lamp's long-lasting 4000 mAh battery.

Garanti og support

The Ledvion Modern Solar Wall Lamp kommer med en 2 års garanti on the product, with a 1 års garanti specifically for the battery. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact Ledvion customer service through the retailer where the product was purchased or visit the official Ledvion webwebsted for kontaktoplysninger.

Image: Warranty details for the Ledvion Solar Wall Lamp, indicating a 2-year product warranty and 1-year battery warranty.