Asus ROG STRIX LC III 360 ARGB

ASUS ROG Strix LC III 360 ARGB CPU Liquid Cooler Instruction Manual

Indledning

The ASUS ROG Strix LC III 360 ARGB is an all-in-one CPU liquid cooler designed to provide efficient thermal management for your processor. It features an innovative 360° rotatable water block with Aura Sync compatibility, a new and quieter Asetek Gen7 V2 pump, and premium ROG ARGB radiator fans. This manual will guide you through the installation, operation, and maintenance of your liquid cooler to ensure optimal performance and longevity.

ASUS ROG Strix LC III 360 ARGB All-in-one CPU Liquid Cooler with radiator, three fans, and pump/water block assembly.

Image: The complete ASUS ROG Strix LC III 360 ARGB liquid cooler assembly.

Hvad er der i æsken

Verify that all components are present in your package before beginning installation. The package should contain the following items:

Contents of the ASUS ROG Strix LC III 360 ARGB CPU Liquid Cooler package, including the cooler assembly, three ROG Strix AF-12S ARGB fans, accessory pack of screws and brackets, fan cable, ARGB cable, Quick Start Guide, ROG VIP card, and ROG sticker.

Image: All components included in the ASUS ROG Strix LC III 360 ARGB retail box.

  • ROG Strix LC III 360 ARGB CPU Liquid Cooler (Radiator, Pump/Water Block, Tubing)
  • 3 x ROG Strix AF-12S ARGB Fans
  • Tilbehørspakke med skruer og beslag (til forskellige CPU-sokler)
  • Ventilatorkabel til ventilatortilslutning
  • ARGB-kabel til lysstyring
  • Hurtig startvejledning
  • ROG VIP Card
  • ROG-klistermærke

Opsætning og installation

Proper installation is crucial for optimal cooling performance. Please refer to the included Quick Start Guide for detailed, step-by-step instructions specific to your CPU socket type. General steps include:

  1. Forbered bundkortet: Installer den passende bagplade og afstandsstykker til din CPU-sokkel (Intel eller AMD).
  2. Mount Radiator Fans: Attach the ROG Strix AF-12S ARGB fans to the radiator using the provided screws. Ensure the fan orientation is correct for desired airflow (intake or exhaust).
  3. Installer radiator: Secure the radiator assembly to your PC case in the desired mounting location (e.g., top, front).
  4. Påfør termisk pasta: If not pre-applied, apply a thin, even layer of thermal paste to the CPU's integrated heat spreader (IHS).
  5. Monter vandblok: Carefully place the water block onto the CPU, aligning it with the standoffs. Secure it with the retention screws, tightening them in a cross pattern until snug. The water block features a 360° rotatable ROG logo, allowing you to adjust its orientation after installation.
  6. Tilslut kabler: Connect the pump power cable to the designated header on your motherboard (usually 'AIO_PUMP' or 'CPU_OPT'). Connect the fan cables to available fan headers. Connect the ARGB lighting cables to a compatible ARGB header on your motherboard or an ARGB controller.
ASUS ROG Strix LC III 360 ARGB All-in-one CPU Liquid Cooler ready for installation.

Image: The cooler assembly with fans attached, prior to mounting.

After installation, double-check all connections and ensure there are no kinks in the tubing. Power on your system and monitor CPU temperatures to confirm proper operation.

Operating the Cooler

Once installed, the ASUS ROG Strix LC III 360 ARGB operates automatically to cool your CPU. The Asetek Gen7 V2 pump and ROG ARGB fans work in conjunction to maintain optimal temperatures.

ARGB-lysstyring

The cooler features 10+ custom Aura lighting effects for personalized aesthetics. To control the ARGB lighting:

  • Aura Sync Software: Download and install the ASUS Aura Sync software from the official ASUS website. This software allows you to synchronize lighting effects across compatible ASUS components and peripherals, including the water block and radiator fans.
  • Bundkort BIOS: Some basic lighting controls may be available directly through your motherboard's BIOS/UEFI settings.
Close-up of the ASUS ROG Strix LC III 360 ARGB water block with its rotatable ROG logo and vibrant Aura lighting effects.

Image: The water block displaying its customizable ARGB lighting.

Pump and Fan Speed Control

Fan and pump speeds are typically controlled via your motherboard's BIOS/UEFI settings or through software utilities provided by your motherboard manufacturer (e.g., ASUS AI Suite). It is recommended to set fan curves that balance cooling performance with noise levels. The ROG ARGB fans are optimized for acoustics and feature 0dB technology for silent operation under light loads.

A single ROG Strix AF-12S ARGB fan, highlighting its specifications: 2200 RPM fan speed, 3.92 mmH2O fan air pressure, and 70.38 CFM airflow.

Image: Specifications of the ROG Strix AF-12S ARGB fan.

Opretholdelse

Regelmæssig vedligeholdelse er med til at sikre din væskekølers levetid og effektivitet.

  • Støvrensning: Periodically clean dust from the radiator fins and fan blades using compressed air. Excessive dust buildup can impede airflow and reduce cooling performance.
  • Inspicer slange: Occasionally check the reinforced, sleeved tubing for any signs of wear, kinks, or leaks. While designed for durability, visual inspection is recommended.
  • Ventilator inspektion: Ensure fan blades are free from obstructions and rotate smoothly.
  • No Fluid Replacement: This is a closed-loop AIO cooler and does not require fluid replacement or refilling.

Fejlfinding

If you encounter issues with your liquid cooler, consider the following common troubleshooting steps:

  • Høje CPU-temperaturer:
    • Ensure the water block is securely mounted and making good contact with the CPU.
    • Bekræft påføring af termopasta.
    • Check if the pump is running (you might feel a slight vibration or hear a faint hum). Ensure its power cable is properly connected.
    • Confirm radiator fans are spinning and oriented correctly. Adjust fan curves in BIOS/software for higher speeds if necessary.
    • Rengør eventuelt støvophobning på radiatoren.
  • Pumpestøj:
    • A slight hum is normal. If you hear excessive gurgling or grinding, it might indicate air in the loop or a failing pump. Try gently tilting your PC case to help dislodge air bubbles.
    • Sørg for, at pumpen modtager stabil strøm.
  • ARGB-belysning virker ikke:
    • Verify that the ARGB cables are correctly connected to a compatible header on your motherboard or controller.
    • Ensure the ASUS Aura Sync software is installed and updated.
    • Check motherboard BIOS settings for ARGB control.
  • Ventilatoren drejer ikke:
    • Check fan cable connections to the motherboard or fan hub.
    • Verify fan speed settings in BIOS/software; some fans may stop spinning at very low temperatures (0dB technology).

If issues persist, contact ASUS customer support for further assistance.

Specifikationer

FeatureSpecifikation
ModelnummerROG STRIX LC III 360 ARGB
Produktdimensioner40.39 x 21.08 x 13.97 cm
Varens vægt2.36 kg
AfkølingsmetodeVentilator, vand
Kompatible enhederDesktop CPUs (various sockets, check Quick Start Guide for specifics)
Støjniveau36 dB (maksimalt)
Luftmængde kapacitet70.38 kubikfod per minut (CFM)
MaterialeCopper (cold plate)
Strømstik type4-benet
PumpetypeAsetek Gen7 v2
BelysningAddressable RGB (ARGB) with Aura Sync

Garanti og support

The ASUS ROG Strix LC III 360 ARGB CPU Liquid Cooler comes with a comprehensive warranty to ensure your peace of mind.

  • Garantiperiode: Dette produkt er bakket op af en 6 års garanti fra købsdatoen. Gem venligst din købsbevis i tilfælde af garantikrav.
  • Teknisk support: For teknisk assistance, fejlfinding ud over denne manual eller garantiforespørgsler, besøg venligst den officielle ASUS-support webwebsted eller kontakt deres kundeservice.

Du kan finde flere oplysninger og supportressourcer på Official ASUS Store Page.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.