deli 4V Cordless Electric Screwdriver

Indledning

Thank you for choosing the deli 4V Cordless Electric Screwdriver. This powerful and versatile tool is designed for various tasks, including light fixtures, home furnishings, electronics, and general repairs. Featuring a 3.6V rechargeable battery with a 1500mAh capacity, USB-C charging, and a high 5 N.m torque, this screwdriver offers efficiency and convenience for everyday use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting. Please read it thoroughly before using the product.

Sikkerhedsinstruktioner

Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elektrisk værktøj, for at reducere risikoen for brand, elektrisk stød og personskade.

• Hold arbejdsområdet rent: Rodede områder inviterer til skader.
• Undgå farlige miljøer: Brug ikke elværktøj i damp eller våde steder, eller udsæt dem for regn. Hold arbejdsområdet godt oplyst.
• Hold børn væk: Alle besøgende skal holdes på sikker afstand fra arbejdsområdet.
• Klæd dig rigtigt: Do not wear loose clothing or jewelry. They can be caught in moving parts. Wear non-slip footwear. Wear hair covering to contain long hair.
• Bær øjenbeskyttelse: Bær altid sikkerhedsbriller.
• Sikkert arbejde: Brug clamps or a vise to hold work when practical. It's safer than using your hand and frees both hands to operate the tool.
• Overdriv ikke: Hold hele tiden ordentligt fodfæste og balance.
• Vedligehold værktøj med omhu: Hold værktøjer skarpe og rene for bedre og sikrere ydeevne. Følg instruktionerne for smøring og udskiftning af tilbehør.
• Afbryd værktøjer: Disconnect the tool from the power source before servicing, when changing accessories, or when not in use.
• Undgå utilsigtet start: Ensure the switch is in the off position before plugging in.
• Tjek for beskadigede dele: Før yderligere brug af værktøjet, skal en beskyttelsesskærm eller en anden del, der er beskadiget, kontrolleres omhyggeligt for at fastslå, om den vil fungere korrekt og udføre sin tilsigtede funktion.
• Use Correct Accessory: Do not use accessories not specifically designed for this tool.
• Never Force the Tool: Det vil gøre jobbet bedre og sikrere med den hastighed, som det blev designet til.

Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, bedes du kontakte kundesupport.

• deli 5 N.m Power Screwdriver (Model EDL-DP04-E3B1)
• 10x S2 Alloy Steel Bits
• 1x 60mm Magnetic Extension Rod
• 1x USB-A til USB-C ladekabel
• 1x brugermanual

Image: The deli electric screwdriver shown with its complete set of accessories, including the 10 S2 steel bits, magnetic extension rod, and USB-C charging cable.

Produkt overview

Familiarize yourself with the components and features of your deli electric screwdriver.

Image: A detailed diagram highlighting the key components of the deli electric screwdriver, including the magnetic chuck, circular LED light, two-way start button, 1500mAh battery, USB-C fast charging port, and its ergonomic design.

• Magnetisk borepatron: Securely holds screwdriver bits.
• Circular LED Light: Illuminates the work area, especially useful in narrow or dimly lit spaces.
• Two-Way Start Button: Allows for easy forward and reverse rotation with a single control.
• 1500mAh batteri: High-capacity lithium-ion battery for extended use.
• USB-C Fast Charging Port: Praktisk og moderne opladningsgrænseflade.
• Ergonomic and Minimalist Design: Provides a comfortable and secure grip for safe operation.

Opsætning

1. Charging the Screwdriver

Before first use, fully charge the screwdriver's internal battery.

1. Locate the USB-C charging port on the bottom of the screwdriver handle.
2. Connect the provided USB-A to USB-C charging cable to the screwdriver.
3. Plug the USB-A end of the cable into a compatible USB power adapter (not included), computer USB port, or power bank.
4. The charging indicator light (if present, typically near the charging port) will illuminate to show charging status. Refer to the indicator behavior for full charge status.
5. A full charge can power the screwdriver to drive approximately 300 screws.

Image: The deli electric screwdriver being charged via its USB-C port, demonstrating its compatibility with various USB power sources such as laptops, wall adapters, and power banks.

Billede: Et illustrativt view of the screwdriver's internal battery, highlighting its 1500mAh capacity and the capability to drive up to 300 screws per charge.

2. Montering af skruetrækkerbits

The screwdriver uses a magnetic chuck for quick and secure bit changes.

1. Select the appropriate S2 alloy steel bit for your task from the included set.
2. Insert the hex end of the bit directly into the magnetic chuck at the front of the screwdriver. The magnetic chuck will hold the bit firmly in place.
3. For hard-to-reach areas, first insert the selected bit into the 60mm magnetic extension rod, then insert the extension rod into the screwdriver's magnetic chuck.
4. For at fjerne et bor skal du blot trække det lige ud af patronen.

Image: The deli electric screwdriver positioned next to its assortment of S2 steel bits and the extension rod, illustrating the circular LED light at the front.

Betjeningsvejledning

1. Powering On and Direction Control

The screwdriver features an innovative two-way start button for intuitive operation.

• To drive screws (forward rotation), press the "R" (Right/Forward) side of the two-way button.
• To remove screws (reverse rotation), press the "L" (Left/Reverse) side of the two-way button.
• Slip knappen for at stoppe skruetrækkeren.

Billede: Et nærbillede view of the screwdriver's yellow two-way start button, clearly marked with 'L' for reverse and 'R' for forward rotation.

2. Brug af LED-lyset

The screwdriver is equipped with a circular LED light that automatically illuminates when the screwdriver is in operation.

• The three LEDs form a ring light strip around the chuck, providing clear visibility of your work area.
• This feature is particularly useful when working in dimly lit conditions or in confined spaces.

Image: The deli electric screwdriver with its circular LED light activated, illustrating how it illuminates the work area, especially in tight or dark spots.

Opretholdelse

• Rensning: Regularly wipe the screwdriver body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the tool.
• Bitpleje: Keep the S2 steel bits clean and free from debris. Store them in a dry place to prevent rust. Replace worn or damaged bits to ensure optimal performance and prevent damage to screw heads.
• Batteriopbevaring: If storing the screwdriver for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Avoid storing it in extreme temperatures. Recharge periodically to maintain battery health.
• Generel inspektion: Periodically check the screwdriver for any signs of damage, loose parts, or wear. Do not operate a damaged tool.

Fejlfinding

Specifikationer

Garanti og support

For garantioplysninger eller teknisk support henvises til garantikortet, der fulgte med dit produkt, eller kontakt producenten direkte. Gem din købskvittering som købsbevis.

Manufacturer: deli

For further assistance, you may visit the official deli store online: deli Official Store