VIPEK V5L Heavy Duty Garment Rack with Dimmable LED Light Instruction Manual

1. Produktet er slutview

The VIPEK V5L Garment Rack is a heavy-duty, freestanding metal clothing rack designed for organizing clothes, shoes, and accessories. It features adjustable shelves, removable hanging rods, and integrated dimmable LED lights for enhanced visibility. Constructed from high-quality carbon steel, it offers a strong bearing capacity of up to 890 lbs, providing a stable and sturdy storage solution.

• Dimensioner: 68.9 cm L x 15.7 cm B x 76.4 cm H.
• Strong Bearing Capacity: Load capacity up to 890 lbs, designed for durability and resistance to deformation.
• Sturdy & Flexible: Made of high-quality iron, featuring 8 adjustable shelves and 4 removable hanging rods for customizable configurations.
• Upgraded Closet with Dimmable LED Lights: Features dual rows of warm white (3000K) LED beads with a glare-free frosted cover. Stepless dimming allows easy adjustment of brightness via a control box.
• Nem at samle: Designed for straightforward assembly with clear instructions. An installation video is also available for guidance.

2. Sikkerhedsoplysninger

Please read and understand all safety information before assembling or using this product.

• Do not overload the garment rack beyond its maximum load capacity of 890 lbs.
• Vær forsigtig med skarpe kanter under montering og brug.
• Sørg for, at alle forbindelser er forsvarligt fastgjort, før du placerer genstande på stativet.
• Use the provided anti-tip devices to secure the rack to a wall, especially in households with children or pets, to prevent accidental tipping.
• Hold små dele væk fra børn for at undgå kvælningsfare.

3. Pakkens indhold

Verify that all components are present before beginning assembly. Refer to the parts list in the user manual for detailed identification.

• Metal Shelves (A)
• Upper Poles (B)
• Middle Poles (C)
• Lower Poles (D)
• Sidebars (E)
• Clothes Hanger Rods (F)
• Hook Brackets (G)
• Screws (H)
• Plastic Clips (I)
• Anti-Tip Devices (J)
• LED Lights with Switch Wire and Power Adapter
• Rubber Mallet (for assembly)

4. Opsætning og montering

Follow these steps carefully to assemble your VIPEK V5L Garment Rack. An installation video is available for visual guidance.

4.1. Prepare Poles and Clips

1. Identify the Lower Poles (D). Attach the Plastic Clips (I) to the grooves on the poles. Ensure the "TOP" arrow on the clips points upwards and that the flanges fit perfectly into the grooves. All clips for a single shelf should be at the same height.
2. Connect Middle Poles (C) to Lower Poles (D) by twisting clockwise. Ensure the hollow end of the middle pole connects to the silver connector of the lower pole.
3. Connect Upper Poles (B) to Middle Poles (C) similarly.

4.2. Assemble Base Sections

1. For each base section, slide four Lower Poles (D) through the sleeves of a Metal Shelf (A). Ensure the VIPEK logo on the shelf is facing the correct direction.
2. Erect the assembly. Press down on the corners of the wire shelf with your palms to firmly secure it onto the plastic clips.
3. Repeat for all base sections.

4.3. Connect Middle and Top Sections

1. Attach Middle Poles (C) to the assembled base sections.
2. Place Metal Shelves (A) onto the Plastic Clips (I) at the desired height for the middle sections. Ensure the shelf is parallel to the floor and slide it down slowly until all four sleeves fit snugly onto the clips.
3. Attach Upper Poles (B) to the middle sections.
4. Place Metal Shelves (A) onto the Plastic Clips (I) at the desired height for the top sections.

4.4. Install Support Rails and Hanger Rods

1. Attach Sidebars (E) to the poles using Plastic Clips (I). Ensure the pointed angle of the metal faces upwards.
2. Attach Hook Brackets (G) to the Clothes Hanger Rods (F) using Screws (H). Partially tighten the screws first.
3. Hang the assembled Clothes Hanger Rods (F) onto the wire shelves and then fully tighten the screws.

4.5. Final Adjustments and Anti-Tip Device

1. Use a rubber mallet to gently tap the wire shelves at their corners to ensure they are firmly connected to the poles.
2. Install the Anti-Tip Devices (J) to secure the garment rack to the wall, following the instructions provided in the package.

Installationsvideo tutorial

For a detailed visual guide on assembling your VIPEK V5L Garment Rack, please watch the official installation tutorial below.

5. Operating Instructions (Dimmable LED Lights)

The VIPEK V5L Garment Rack features integrated dimmable LED lights for convenient illumination.

1. Tænd/sluk: Locate the control box for the LED lights. Press the button once to turn the lights on or off.
2. Trinløs dæmpning: To adjust the brightness, press and hold the button on the control box. The lights will gradually dim or brighten. Release the button when the desired brightness level is reached. The lights offer a 3000K warm white color temperature.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your garment rack, follow these maintenance tips:

• Rensning: Tør metaloverfladerne af med en blød,amp klud. Undgå slibende rengøringsmidler eller barske kemikalier, der kan beskadige overfladen.
• Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastspændte. Efterspænd om nødvendigt.
• Belastningsstyring: Distribute weight evenly across the shelves and hanging rods to prevent stress on any single point. Do not exceed the maximum load capacity.
• LED lys: Ensure the LED lights and wiring are free from damage. If any damage occurs, discontinue use and contact customer support.

7. Fejlfinding

If you encounter any issues with your VIPEK V5L Garment Rack, refer to the following common troubleshooting steps:

• Racket er vakkelvornt:
  • Ensure all plastic clips are correctly positioned in the grooves and fully engaged.
  • Use the rubber mallet to firmly tap down all shelves onto their respective clips.
  • Check that the adjustable feet are evenly balanced on the floor.
• LED-lys virker ikke:
  • Kontroller, at strømadapteren er tilsluttet korrekt til en fungerende stikkontakt.
  • Check all connections between the LED light strips, switch wire, and power adapter.
  • Ensure the switch wire is firmly and well connected.
  • Kontakt kundesupport, hvis problemet fortsætter.
• Manglende dele:
  • Carefully check all packaging materials. If parts are still missing or damaged, kindly reach out to VIPEK customer support for assistance.

8. Specifikationer

9. Garanti og support

For warranty information, missing parts, or any other product-related inquiries, please contact VIPEK customer support directly. Any unauthorized modification to this item will void its warranty.

Refer to the contact information provided with your purchase or visit the official VIPEK webwebsted for supportdetaljer.