Honeywell Surge Protector User Manual

1. Introduktion

This manual provides essential information for the safe and effective use of your Honeywell 4 Out Surge Protector. This device is designed to protect your electronic equipment from power surges and spikes, while also offering multiple charging options.

The surge protector features 4 universal sockets, 2 USB-A ports, and 1 USB-C port with PD20W for fast charging. It includes a master switch, automatic overload protection, and a 1.8-meter cord for flexible placement. The unit is built with fire-resistant material and incorporates advanced safety features to ensure reliable performance.

Billede 1.1: Overview of the Honeywell 4 Out Surge Protector.

2. Opsætning

1. Pak enheden ud: Carefully remove the surge protector from its packaging. Inspect for any signs of damage.
2. Vælg en placering: Place the surge protector on a flat, stable surface, away from water sources and direct heat. Ensure the 1.8-meter cord can reach a wall outlet without being stretched or obstructed.
3. Sæt i stikkontakten: Insert the surge protector's power plug firmly into a grounded 3-prong wall outlet. Do not use extension cords or adapters with the surge protector itself.
4. Tænd: Press the master switch to the 'ON' position. The LED indicator will illuminate, confirming that the surge protector is active and providing protection.
5. Tilslut enheder: Plug your electronic devices into the universal AC sockets, USB-A ports, or the USB-C PD20W port. Ensure all connections are secure.

Image 2.1: Connecting multiple devices to the surge protector.

3. Betjeningsvejledning

3.1 Strømforsyning til enheder

• Master Switch: Use the master switch to turn power on or off to all connected devices simultaneously. When the switch is 'ON', the surge protector is active.
• AC stikkontakter: Plug devices requiring AC power into the 4 universal sockets. These sockets are designed to accommodate various plug types.
• USB-opladning: Connect your USB-powered devices (smartphones, tablets, etc.) to the 2 USB-A ports or the 1 USB-C PD20W port for charging. The USB-C port supports Power Delivery (PD) for faster charging of compatible devices.

Image 3.1: Utilizing the Ultra Fast Charging PD20W port.

3.2 Overspændingsbeskyttelse

The surge protector continuously monitors incoming power for surges and spikes. In the event of an electrical surge, the unit will divert excess voltage away from your connected devices, protecting them from damage. The LED indicator confirms active surge protection.

Image 3.2: Surge protection features in action.

4. Sikkerhedsfunktioner

Your Honeywell Surge Protector is equipped with 8 advanced safety features:

• Overbelastningsbeskyttelse: Automatically cuts power to prevent damage from excessive current draw.
• Master Reset Switch: Allows instant resetting of surge protection after an overload or surge event.
• Child Lock Shutter: Prevents accidental insertion of objects into the AC sockets, enhancing safety for children.
• Fire Resistance Material: Constructed with materials designed to resist fire.
• Full 3-Line Surge Protection: Protects all three lines (Live, Neutral, Ground) from surges.
• Metaloxidvaristor (MOV): Technology that allows normal current to pass through while diverting surges through the ground circuit.
• LED-indikator: Provides visual confirmation of active surge protection.
• Device Secure Warranty (DSW): Offers additional peace of mind for connected devices.

Billede 4.1: Overview of the 8 safety features.

5. Vedligeholdelse

• Rensning: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Inspektion: Periodically inspect the cord and housing for any signs of damage, such as cuts, fraying, or cracks. If damage is found, discontinue use and contact customer support.
• Miljø: Ensure the surge protector is used in a dry indoor environment. Avoid exposing it to moisture, extreme temperatures, or corrosive substances.

6. Fejlfinding

• Ingen strøm til enheder:
  • Check if the master switch is in the 'ON' position.
  • Sørg for, at overspændingsbeskytteren er tilsluttet korrekt til en fungerende stikkontakt.
  • If the overload protection has tripped, press the master reset switch to restore power.
  • Verify that the connected devices are properly plugged in and functioning correctly.
• LED Indicator Off:
  • If the LED indicator is off, it may indicate that the surge protection components have been compromised due to a significant power surge. While power may still be supplied, surge protection is no longer active. It is recommended to replace the unit.
• Slow Charging via USB:
  • Ensure your device and charging cable support fast charging (e.g., Power Delivery for USB-C).
  • Prøv en anden USB-port eller et andet kabel.
  • The charging speed can be affected by the device's battery level and its charging protocol.

7. Specifikationer

8. Garanti

This Honeywell Surge Protector comes with a 3 års producentgaranti fra købsdatoen. Gem venligst din købskvittering som købsbevis i tilfælde af garantikrav.

Derudover indeholder dette produkt en Device Secure Warranty (DSW). This warranty provides coverage for connected equipment that may be damaged by a power surge while properly connected to the Honeywell Surge Protector. Please refer to the specific terms and conditions of the Device Secure Warranty provided with your product for full details and claim procedures.

9. Support

For any assistance, queries, or warranty claims regarding your Honeywell Surge Protector, please contact our customer support team:

• Gratis nummer: 1800-120-6838 (Monday to Saturday, 10 AM to 7 PM)
• E-mail support: Support@honeywellconnection.com

Honeywell offers over 690 service centers nationwide for on-site support. For more information, please visit the official Honeywell webwebstedet eller se kontaktoplysningerne på produktemballagen.

Fabrikantens kontaktoplysninger: Secure Connection Limited, Flat C 61/F, Block A, LA Rossa, Coastal Skyline 12 Tung Chung, Water Front Road Tung Chung, N.T., Hong Kong

Importørens kontaktoplysninger: Creative Peripherals & Distribution Limited Jayem Warehousing Pvt. Ltd., Sumeet Logistics, Building No. C-3,Gala No. 1 to 6A, At Village Kikse-Borivili, Opp. Rajdhani Dhaba, Mumbai-Nasik Highway, District Thane, Bhiwandi-421302.