Indledning
Welcome to the world of Carrera GO!!! Max Competition. This race track set, model 20062574, offers an exciting Formula 1 racing experience with 1:43 scale cars and dynamic track elements. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your race track.
For additional information and products, please visit the official Carrera webwebsted: www.carrera-toys.com
Sikkerhedsoplysninger
Please read all safety instructions carefully before operating the race track. Failure to follow these instructions may result in injury or damage to the product.
- Dette produkt er egnet til børn fra 6 år. Opsyn af voksne anbefales.
- Hold små dele væk fra små børn for at undgå kvælningsfare.
- Ensure all electrical connections are secure and dry. Do not operate the track near water.
- Only use the power adapter supplied with the set.
- Do not modify the track or cars in any way not specified by the manufacturer.
- Disconnect the power supply when the track is not in use or during assembly/disassembly.
Opsætning og montering
Pakkens indhold
Before starting assembly, verify that all components are present. Refer to the "IN THE BOX" diagram below.

Figure 1: Contents of the Carrera GO!!! Max Competition Race Track Set. Includes two Formula 1 cars, track sections, speed controllers, and accessories.
- 2 x Carrera GO!!! Formula 1 Slot Cars (Mercedes-AMG F1 W14 E Performance "L. Hamilton" and Red Bull Racing RB19 "M. Verstappen")
- 2 x Speed Controllers with Turbo Button
- Track sections (straight tracks, curves, looping action, junction, lap counter)
- Power Supply (CEE 7/16 Europlug)
- Sporbarrierer og understøtninger
- Instruktionsmanual
Sporsamling
The Carrera GO!!! Max Competition set features a track length of 6.3 meters (20.67 ft) and an assembled dimension of approximately 175 x 122 cm (5.74 x 4.00 ft). Assembly typically takes about 30 minutes.
- Vælg et passende sted: Select a flat, stable surface large enough for the track layout.
- Connect track sections: Carefully connect the track pieces by sliding the connectors together. Ensure a snug fit for good electrical contact. Refer to the assembly diagram for the standard layout.
- Install special track elements: Integrate the looping action, junction, and lap counter as shown in the diagram. Use supports for elevated sections like the loop.
- Attach track barriers: Secure the red track barriers to the outer edges of curves to prevent cars from derailing.
- Connect power and controllers: Plug the power supply into the connection track section. Connect the two speed controllers to the designated ports on the connection track.
- Place cars on track: Position the slot cars onto the track, ensuring the guide keels are correctly seated in the track slot.

Figure 2: Standard track layout and assembly information for the Carrera GO!!! Max Competition set.
The set allows for multiple track layout options to enhance your racing experience. Experiment with different configurations as shown in the "Race Track Options" diagram.

Figur 3: Eksamples of multiple race track layout options.
Betjeningsvejledning
Once assembled, the race track is ready for immediate use. The set is designed for up to two players.

Figure 4: The included Formula 1 cars and speed controllers.
- Tænd: Sæt strømadapteren i en stikkontakt.
- Start løb: Use the hand controller to control the speed of your car. Press the trigger to accelerate.
- Turbo Boost: Each controller is equipped with a turbo button. Press this button for a temporary burst of speed, useful for overtaking or navigating straight sections. Use with caution on curves to avoid derailing.
- Omgangstæller: The integrated lap counter will automatically record the laps completed by the cars.
Tip: Practice controlling your car's speed, especially around corners and through the loop, to master the track and prevent derailing.
General Carrera Track Demonstration
The following video demonstrates general operation principles of a Carrera track set. While it features a different model (Carrera First Mario Kart), the basic concepts of car placement, controller use, and track interaction are similar.
Video 1: Demonstration of a Carrera track set, showing cars racing and controller usage. This video is for a Carrera First Mario Kart set and illustrates general track operation.
Opretholdelse
- Sporrensning: Regularly wipe the track rails with a clean, dry, lint-free cloth to remove dust and debris. This ensures good electrical contact for the cars.
- Vedligeholdelse af bilen: Check the car's guide keel and contact brushes periodically. Replace worn brushes to maintain optimal performance. Ensure the wheels are clean and free of hair or fibers.
- Opbevaring: Når de ikke er i brug, skal skinnen og bilerne opbevares et tørt og støvfrit miljø. Adskil skinnen forsigtigt, hvis den skal opbevares i længere perioder.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Bilen bevæger sig ikke eller bevæger sig langsomt. |
|
|
| Car frequently derails. |
|
|
| Lap counter not working. |
|
|
Specifikationer
- Modelnummer: 20062574
- Mærke: Carrera
- Skala: 1:43
- Sporlængde: 6.3 meter (20.67 fod)
- Samlede mål (L x B x H): 175 x 122 x 40 cm (approx. 5.74 x 4.00 ft)
- Strømkilde: Electric with cord (CEE 7/16 Europlug)
- Antal spillere: 2
- Anbefalet alder: 6+ år
- Samlingstid: Cirka 30 minutter
- Vægt: 2.5 kg
- Uddannelsesmål: Hand-eye coordination, Concentration, Strategic thinking
- Særlige funktioner: Authentic Formula 1 experience, Turbo button on controllers, Looping action, Junction, Lap counter.
Garanti og support
This Carrera GO!!! Max Competition Race Track Set comes with a 2 års producentgarantiGem venligst din købsbevis i tilfælde af garantikrav.
For technical support, spare parts, or further inquiries, please contact Carrera customer service or visit their official webwebsted: www.carrera-toys.com.
Availability of spare parts in the EU is guaranteed for 1 year.