ALIENTEK T80/T80P Smart Soldering Iron Kit User Manual

1. Introduktion

This manual provides detailed instructions for the safe and effective use of your ALIENTEK T80/T80P Smart Soldering Iron Kit. The T80 and T80P are advanced, portable digital soldering irons featuring fast heating, precise temperature control, and a clear OLED display. Designed for various soldering tasks, these tools support PD/QC fast charging protocols via a Type-C interface and offer adjustable heating power up to 100W.

Please read this manual thoroughly before operating the device to ensure proper function and safety.

2. Sikkerhedsoplysninger

WARNING: Soldering irons operate at high temperatures and can cause severe burns and fire hazards. Always exercise extreme caution.

• Brug altid passende personlige værnemidler, herunder sikkerhedsbriller, når du bruger loddekolben.
• Sørg for tilstrækkelig ventilation på dit arbejdsområde for at undgå at indånde loddedampe.
• Never touch the soldering iron tip or heating element when the device is powered on or hot.
• Place the soldering iron in its stand when not in use. Do not lay it on flammable surfaces.
• Keep the soldering iron away from children and pets.
• Use only compatible power supplies and accessories. A 100W+ power supply is recommended for optimal performance.
• Disconnect the power supply when changing tips or performing maintenance.
• Do not use the soldering iron in wet conditions or near flammable liquids or gases.
• If the device appears damaged, do not operate it. Contact support for assistance.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• ALIENTEK T80 or T80P Smart Soldering Iron
• USB Type-C til Type-C-kabel
• Soldering Iron Tips (various types, e.g., 3 or 4 tips depending on kit)
• Loddejernsstativ
• Brugervejledning (dette dokument)

Image 3.1: Contents of the ALIENTEK T80/T80P Smart Soldering Iron Kit, including the iron, multiple tips, USB-C cable, and stand.

Image 3.2: The ALIENTEK T80/T80P Smart Soldering Iron Kit as packaged, showing the iron, tips, cable, and stand.

4. Produktet er slutview

The ALIENTEK T80/T80P Smart Soldering Iron features a compact design with an OLED display for clear status indication and two control buttons.

Image 4.1: Diagram illustrating the components of the T80 and T80P soldering irons, including the tip, anti-slip silicone cover, control keys (A and B), OLED screen, and Type-C port.

4.1 Key Differences Between T80 and T80P

5. Opsætning

5.1 Montering af loddespidsen

1. Ensure the soldering iron is disconnected from any power source and is cool to the touch.
2. Carefully insert the desired soldering tip into the heating element receptacle until it is firmly seated. Do not force the tip.
3. Ensure the tip is fully inserted to ensure proper heat transfer.

5.2 Tilslutning af strøm

1. Connect the provided USB Type-C to Type-C cable to the Type-C port on the soldering iron.
2. Connect the other end of the cable to a compatible PD/QC fast charge power adapter. For optimal performance and fast heating, a power adapter capable of delivering 100W (e.g., 20V/5A) is highly recommended. The device supports a working voltage område fra 9V til 20V.
3. The OLED screen will illuminate upon successful power connection, indicating the current status.

Note: The host does not contain a battery and requires an external power supply for use. It is normal for fast charging heads to have induced electricity. If you are sensitive to induced electricity, it is recommended to use it with a power bank.

6. Betjeningsvejledning

6.1 Tænd/sluk

• The soldering iron powers on automatically when connected to a suitable power source.
• To power off, simply disconnect the Type-C power cable.

6.2 Temperaturjustering

Use the control buttons (Key A and Key B) to adjust the target temperature. The OLED screen will display the current and target temperatures.

Billede 6.1: Eks.amples of the OLED screen display, showing temperature settings, volume information, temperature step, language selection (Chinese/English), sleep mode, standby mode, and upgrade options.

6.3 Power Fine-Tuning

The device offers 6 power gears for fine-tuning the current to achieve precise power adjustment (18W to 100W).

Image 6.2: Display showing the 6 available power gears (100W, 65W, 36W, 24W, 27W, 18W) and instructions for power fine-tuning.

Steps for Power Fine-Tuning:

1. Enter the power fine-tuning interface.
2. Press Key A or Key B to select the adjustment item.
3. Long press Key B to select, short press to adjust, long press Key A to exit.
4. Select OK and press and hold Key B to save your settings.

Note: The T80 will show initial temperature fluctuations when using a new heating core. Temperature stability will improve after several uses.

Image 6.3: Graph illustrating the fast heating time (2 seconds for T80 to melt tin) and temperature control accuracy of less than 2%.

6.4 Induced Dormancy (Auto Sleep)

The soldering iron features an intelligent induction design that automatically enters hibernation mode when put down, prolonging the life of the heating core and saving energy. It will wake up when picked up.

Image 6.4: Illustration of the induced dormancy feature, showing the soldering iron entering hibernation mode (displaying "休眠" and 200°C) when put down and waking up when picked up.

7. Vedligeholdelse

7.1 Cleaning the Soldering Tip

• Rengør loddespidsen regelmæssigt med en annonce.amp svamp eller messinguld til at fjerne overskydende loddetin og oxidation.
• After cleaning, apply a small amount of fresh solder to the tip (tinning) to prevent oxidation and prolong its lifespan.
• Ensure the tip is tinned before storing the iron.

7.2 Generel rengøring

• Sørg for, at enheden er frakoblet og afkølet, før den rengøres.
• Tør loddekolbens hus af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Hold Type-C-porten fri for støv og snavs.

7.3 Udskiftning af spids

Soldering tips are consumable items and will eventually wear out. Replace tips when they become excessively pitted, corroded, or no longer hold solder effectively. Ensure the iron is cool and unplugged before replacing tips.

8. Fejlfinding

9. Specifikationer

Image 9.1: Basic parameters of the ALIENTEK T80/T80P Smart Soldering Iron, including dimensions, power supply, operating voltage, fast charging protocol, temperature range, adjustable power, and screen type.

10. Garanti og support

ALIENTEK products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ALIENTEK webwebstedet. Behold din købskvittering som købsbevis.

For further assistance, you may contact ALIENTEK customer service through their official channels or the retailer from whom you purchased the product.

ALIENTEK Official Store: Visit ALIENTEK Store on Amazon