Flysky FS-SR8 2.4GHz ANT Protocol 8 Channel Receiver User Manual

Indledning

The Flysky FS-SR8 is an advanced 8-channel receiver designed for use with RC transmitters utilizing the ANT protocol, specifically compatible with the FS-ST8. This compact receiver features two external antennas for enhanced signal reception and supports bidirectional transmission, allowing the transmitter to display returned information from the receiver after two-way binding. It is versatile, adapting to a wide range of models including fixed-wing aircraft, helicopters, gliders, delta-wing airplanes, multicopters, racing drones, engineering vehicles, nest boats, robots, and cars.

Key features include PWM/PPM/i-BUS/S.BUS data output, a wide input power range of 3.5V to 9V DC, and robust construction for reliable performance.

Sikkerhedsoplysninger

Vær venligst opmærksom på voltage and safety when using this device. Ensure correct polarity and voltage within the specified range (3.5V~9V/DC) to prevent damage to the receiver or connected components.

Produkt overview

The FS-SR8 receiver features clearly labeled ports and indicators for easy setup and operation.

Figur 1: Front view of the FS-SR8 receiver. Visible labels include LED indicator, SERVO, SENS, BVD/VCC, BIND ports, and channels 1-8. The "BIND" button and "S+- PPM/1" output are also clearly marked.

Figur 2: The FS-SR8 receiver shown with its two external antennas and a snippet of the product manual, illustrating the compact design and included components.

Figur 3: Bag view of the FS-SR8 receiver, displaying regulatory markings such as 'CE' and the country of manufacture, 'MADE IN CHINA'.

Figur 4: Vinklet view of the FS-SR8 receiver, providing a clear perspective of the antenna connections and the arrangement of the various input/output ports.

Figur 5: The FS-SR8 receiver sealed in its anti-static retail packaging, ready for distribution.

Portbeskrivelser:

• LED: Statusindikatorlys.
• SERVO: Standard servo output channels (1-8).
• SENS: Sensor input port.
• BVD/VCC: Batteri Voltage Detection / Power Input.
• BINDE: Binding port/button for pairing with transmitter.
• S+- PPM/1: Multi-functional port for S.BUS, PPM, or Channel 1 output.

Opsætning

Bindende procedure:

1. Ensure your FS-ST8 transmitter is powered off.
2. Connect power to the FS-SR8 receiver (3.5V~9V/DC). The LED on the receiver should start flashing, indicating it's ready for binding.
3. Tryk og hold BIND-knappen på modtageren nede.
4. While holding the BIND button, power on your FS-ST8 transmitter.
5. The LED on the receiver should change to a solid light, indicating successful binding. Release the BIND button.
6. Power cycle both the transmitter and receiver to confirm the binding.
7. The FS-SR8 supports both one-way and two-way binding. For two-way binding, the transmitter will display telemetry information returned from the receiver.

Antenneplacering:

Proper antenna placement is crucial for optimal range and signal reliability. Position the two antennas at a 90-degree angle to each other, away from carbon fiber, metal, or other conductive materials that could shield the signal. Ensure the antenna tips are exposed and not bent sharply.

Connecting to Flight Controller/Servos:

Connect the receiver's output ports (PWM/PPM/i-BUS/S.BUS) to your flight controller or servos according to your model's wiring diagram. Refer to your flight controller's manual for specific connection details for each data output type.

Drift

Kompatible modeller:

The FS-SR8 receiver is designed for a broad range of RC models, including:

• Fly med faste vinger
• Helikoptre
• Svævefly
• Delta-wing airplanes
• Multicopters
• Racingdroner
• Ingeniørkøretøjer
• Nest boats
• Robotter
• RC biler

Range and Signal:

The receiver offers a typical air distance of over 1000m without interference. Always perform a range check before flying or operating your model to ensure a stable connection. Avoid operating in areas with high RF interference.

Opretholdelse

• Rensning: Hold modtageren ren og fri for støv, snavs og fugt. Brug en blød, tør klud til rengøring.
• Miljøforhold: Operate and store the receiver within the specified temperature range of -10℃ to +60℃ and humidity limit of 20% to 95%. Avoid extreme temperatures and high humidity.
• Fysisk inspektion: Regularly inspect the antennas for any damage or kinks. Ensure all connections are secure.
• Firmwareopdateringer: The receiver supports online updates. Check the official Flysky website for the latest firmware versions and update instructions to ensure optimal performance and compatibility.

Fejlfinding

Specifikationer

Hvad er der i æsken

• 1x Flysky FS-SR8 Receiver

Garanti og support

For warranty information, technical support, and the latest product updates, please visit the official Flysky webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Officiel Webwebsted: http://www.flysky-cn.com