System Sensor 2W-B
System Sensor 2W-B i3 Series 2-Wire Photoelectric Smoke Detector User Manual
Model: 2W-B
Indledning
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your System Sensor 2W-B i3 Series 2-Wire Photoelectric Smoke Detector. Please read this manual thoroughly before installation and keep it for future reference.
Funktioner
- Photoelectric smoke detector with plug-in design for easy pre-wiring before installation.
- Drift compensation automatically adjusts sensitivity to minimize nuisance alarms from dust accumulation.
- Smoothing algorithms to reduce false alarms from short-term smoke and dust spikes.
- Removable detector cover and chamber for simplified cleaning and maintenance.
- Built-in remote maintenance signaling.
- Power Source: 12/24 VDC, Two-Wire.
- Visual Alert: Red LED.
- Driftstemperatur: 32°F til 120°F (0°C til 49°C).
- Standards: UL, CSFM.
Vigtige sikkerhedsoplysninger
WARNING: This device is a smoke detector and not a fire alarm system. It is designed to detect smoke and provide a visual alert.
All life safety devices should be tested annually according to NFPA72 standards.
Do not paint the detector. Paint may interfere with the unit's ability to detect smoke.
This detector is not suitable for use in areas with high humidity or extreme temperatures outside the specified operating range.
Opsætning og installation
The System Sensor 2W-B i3 Series smoke detector features a plug-in design for easy installation.
Udpakning og komponenter
Upon opening the package, you will find the smoke detector unit and an instruction guide. The detector consists of two main parts: the base, which connects to the wiring, and the detector head, which twists onto the base.
Image: Packaging of the System Sensor 2W-B i3 Series Smoke Detector, highlighting key features and certifications like UL and FM approval. The model number 2W-B is clearly visible.
Kabelføring og montering
This is a 2-wire system designed for 12/24 VDC power. Refer to the included wiring diagram in the instruction guide for specific connection details. The base plate should be securely mounted to the ceiling or wall.
Once the base is wired, align the detector head with the base and twist clockwise until it locks into place.
Note: Ensure power is disconnected before performing any wiring or installation.
Operation
Once properly installed and powered, the detector will begin normal operation.
Indikatorlys
- Green LED (Normal Operation): A blinking green light indicates that the detector is receiving power and functioning correctly. This light typically blinks approximately once every minute.
- Red LED (Alarm Condition): A solid red light indicates that the detector has sensed smoke and is in an alarm state.
Image: A System Sensor 2W-B i3 Series Smoke Detector installed on a ceiling, showing its discreet profile and the green indicator light during normal operation.
Avanceret detektion
The i3 Series incorporates drift compensation and smoothing algorithms to differentiate between actual smoke conditions and nuisance factors like dust or cooking fumes, reducing false alarms.
Opretholdelse
Regular maintenance is crucial for ensuring the continued reliability of your smoke detector.
Rensning
The detector's cover and chamber are removable for easy cleaning. Gently vacuum or use a soft, damp cloth to remove dust and debris from the exterior and interior chamber. Do not use cleaning solvents.
Afprøvning
Test the detector monthly by pressing the test button or using approved smoke detector test spray. The red LED should illuminate, and the alarm should sound. If the alarm does not sound, replace the detector immediately.
Annual professional testing according to NFPA72 is recommended.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen grøn LED | No power or wiring issue. | Check power supply and wiring connections. Consult a qualified electrician if necessary. |
| Frequent Nuisance Alarms | Detector location, dust accumulation, or environmental factors. | Clean the detector chamber. Relocate the detector away from cooking fumes, high humidity, or dusty areas. |
| Red LED On, No Smoke | Detector fault or sensitivity issue. | Clean the detector. If the issue persists, the detector may need replacement. |
| Alarm Does Not Sound During Test | Detector malfunction. | Replace the detector immediately. |
Specifikationer
- Model: 2W-B
- Detektionsmetode: fotoelektrisk
- Strømkilde: 12/24 VDC, Two-Wire
- Visuel advarsel: Rød LED
- Diameter: 5-19/64 inches (approx. 5.3 inches)
- Højde: 2 tommer
- Varens vægt: 0.5 pund (8 ounces)
- Driftstemperatur: 32°F til 120°F (0°C til 49°C)
- Standarder: UL, CSFM
- UPC: 783863017599
- Fabrikant: Systemføler
- Oprindelsesland: USA
Garanti og support
Producentens garanti
This System Sensor 2W-B i3 Series Smoke Detector comes with a 3-year manufacturer's warranty. For warranty claims, please refer to the contact information provided in the original packaging or visit the manufacturer's webwebsted.
Teknisk support
For technical assistance or further inquiries, please contact System Sensor customer support.
Kontaktoplysninger:
- Webwebsted: www.systemsensor.com
- Telefon: Se produktemballagen eller webwebsted for regionale supportnumre.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.