1. Introduktion
Thank you for choosing the Hbada E3 Ergonomic Office Chair. This chair is designed to provide optimal comfort and support for extended periods of sitting, featuring advanced ergonomic adjustments. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your chair.
2. Sikkerhedsoplysninger
- Stå ikke på stolen.
- Brug ikke stolen som skammel.
- Sørg for, at alle bolte og skruer er forsvarligt spændt før brug. Kontroller med jævne mellemrum og efterspænd efter behov.
- Do not exceed the maximum weight capacity (typically 120 kg or 265 lbs, though not specified in provided data, this is a standard safety precaution).
- Hold hænder og fingre væk fra bevægelige dele under justering.
- Brug stolen på en plan overflade for at forhindre den i at vælte.
3. Pakkens indhold
Kontroller venligst, at alle komponenter er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.
- Ryglænssamling
- Sædesamling
- Nakkestøtte
- Armlæn (venstre og højre)
- Gas Lift cylinder
- Stjernebase
- Casters (5 pcs)
- Hardware-sæt (skruer, unbrakonøgle)
4. Opsætning og montering
Follow these general steps for assembly. Refer to the included graphical instructions for detailed diagrams.
- Fastgør hjulene til stjernefoden ved at skubbe dem godt ned i hullerne.
- Indsæt gasløftecylinderen i centerhullet på stjernebasen.
- Attach the armrests to the seat assembly using the provided screws.
- Forbind ryglænet med sædeenheden.
- Placer det samlede sæde og ryglæn på gasløftcylinderen.
- Attach the headrest to the top of the backrest.
Image: Overall dimensions of the Hbada E3 office chair, showing height, width, and depth measurements.
5. Betjeningsvejledning og justeringer
The Hbada E3 chair offers multiple adjustment options for personalized comfort.
5.1. Justering af stolens højde
To adjust the chair height, pull the lever located under the seat upwards while applying or releasing kropsvægt. Slip håndtaget i den ønskede højde.
5.2. Hældningsfunktion
The chair features a 140-degree recline function. Use the recline lever (usually on the side) to unlock the backrest, lean back to your preferred angle, and then push the lever down to lock it in place.
Image: A person demonstrating the 140-degree recline function of the Hbada E3 chair.
5.3. Justering af lændestøtte
The 3-zone lumbar support system provides comprehensive back protection. It can be adjusted in 8 directions, including inner/outer 40-degree rotation and a 14-degree buffer zone for optimal comfort and pressure relief.
Billede: Detaljeret view of the Hbada E3's adjustable 3-zone lumbar support system.
5.4. 3D-armlænsjustering
The 3D armrests offer versatile adjustments to support your arms and shoulders. They can be adjusted:
- Højde: Up to 70mm (2.95 inches) vertically.
- Forside/Bagside: Up to 50mm (1.65 inches) horizontally.
- Rotation: Up to 40 degrees inward or outward.
Image: Diagram illustrating the height, front/back, and rotational adjustments of the 3D armrests.
5.5. 3D-justering af hovedstøtte
The 3D headrest provides neck and head support and can be adjusted:
- Højde: Up to 4.5cm vertically.
- Rotation: Op til 60 grader.
- Vip: Op til 45 grader.
Image: Diagram illustrating the height, rotation, and tilt adjustments of the 3D headrest.
5.6. Sædedybdejustering
Adjust the seat depth by up to 5cm to accommodate different leg lengths and ensure proper thigh support.
Image: Illustration of the 5cm seat depth adjustment mechanism.
5.7. Ryglænets højdejustering
The backrest can be adjusted vertically by 7cm to align the lumbar support with your natural spine curvature.
Image: Diagram showing the 7cm vertical adjustment range for the backrest.
6. Vedligeholdelse
Regular maintenance helps prolong the life of your chair.
- Rensning: Wipe mesh and plastic surfaces with a damp klud og mildt rengøringsmiddel. Undgå skrappe kemikalier.
- Inspektion: Periodically check all screws and bolts for tightness and re-tighten as needed.
- Hjul: Keep casters free of debris (hair, dust) to ensure smooth movement.
- Gaslift: Forsøg ikke at adskille gasløftecylinderen.
7. Fejlfinding
Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stolen justerer ikke højden | Fejl på gasløftecylinder, eller håndtaget er ikke aktiveret. | Sørg for, at højdejusteringshåndtaget er trukket helt ud. Hvis problemet fortsætter, skal gasliften muligvis udskiftes. Kontakt support. |
| Knirkende lyde | Løse forbindelser eller friktion mellem dele. | Check and tighten all screws and bolts. Apply a small amount of silicone lubricant to moving parts if necessary. |
| Stolens vakler | Loose base connections or uneven floor. | Ensure the star base is securely attached and all casters are properly inserted. Check if the floor is level. |
If troubleshooting steps do not resolve the issue, please contact Hbada customer support.
8. Specifikationer
- Model: E3 (E301G-V3)
- Mærke: Hbada
- Ryglænsstil: Mesh-ryg
- Sæde Materiale Type: Mesh
- Særlige funktioner: Ergonomic, Lumbar Adjustment Function
- Anbefalet brug: Kontor, spil
- Værelsestype: Kontor
- Armrest Style: 3D armlæn
- Base Style: Hjul
- Reclining Stages: 2 (Implied by 140-degree recline, usually lockable at upright and reclined)
- Farve: White (Note: Product title mentions 'White', but images show grey/silver. Assuming 'White' refers to the frame/accents for this specific model variant.)
9. Garanti og support
Hbada er forpligtet til at levere produkter af høj kvalitet og fremragende kundeservice.
- 3-års garanti: Produktet leveres med 3 års garanti.
- 30-dages returpolitik: Enjoy a 30-day no-questions-asked return and exchange policy.
- Kundeservice: For any initial defects, malfunctions, or inquiries, please contact our customer service center. We will provide free replacement parts.
For support, se venligst de kontaktoplysninger, der fulgte med dit køb, eller besøg den officielle Hbada webwebsted.
10. Officielle produktvideoer
No relevant official product videos with 'Seller' as creator type and m3u8 format were found in the provided data.