1. Introduktion
Thank you for choosing the USX MOUNT Universal Full Motion TV Wall Mount. This manual provides detailed instructions for safe installation, operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.
This mount is designed to securely hold 10-26 inch displays with a maximum weight of 10kg (22 lbs). It supports VESA mounting patterns of 50x50mm, 75x75mm, and 100x100mm.
Figure 1.1: USX MOUNT Universal Full Motion TV Wall Mount
2. Produktspecifikationer
| Feature | Specifikation |
|---|---|
| Model | USX-WM1026 |
| Skærmstørrelseskompatibilitet | 10-26 tommer |
| Maksimal belastningskapacitet | 10 kg (22 lbs) |
| VESA-kompatibilitet | 50x50mm, 75x75mm, 100x100mm |
| Tilt vinkel | +30° / -30° |
| Swivel Angle (Wall Plate) | ±45° (afhængigt af TV-størrelse) |
| Vægafstand | 62 mm |
| Materiale | Koldvalset stål |
| Farve | Sort |
Note: Always verify your TV's weight, screen size, and VESA pattern before installation to ensure compatibility.
Figure 2.1: Compatibility Check for TV Size, VESA, Weight, and Wall Type
Figure 2.2: Supported VESA Mounting Patterns
3. Sikkerhedsoplysninger
Please read and understand all instructions before installation. If you have any questions, contact customer support. Improper installation may result in property damage or personal injury.
- Do not install this product on drywall or plasterboard alone. It must be mounted to a solid concrete wall or a wooden stud.
- Ensure the wall structure can safely support the combined weight of the mount and your display.
- Overskrid ikke den maksimale lastekapacitet på 10 kg (22 lbs).
- Brug kun den medfølgende hardware. Kontakt kundesupport, hvis der mangler eller er beskadigede dele.
- Always have two people for installation, especially when lifting the TV.
- Hold børn og kæledyr væk under installationen.
4. Pakkens indhold
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, please contact USX MOUNT customer service.
Pakken indeholder typisk:
- Vægplademontering
- TV beslag
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- Instruktionsmanual
5. Installationsvejledning
Følg disse trin omhyggeligt for en sikker installation.
5.1. Choose Your Wall Type
This mount is suitable for installation on solid concrete walls or wooden studs. Do NOT install on drywall or plasterboard without securing to a stud.
Figur 5.1: Kompatible vægtyper
5.2. Trin-for-trin installation
- Fastgør vægpladen: Position the wall plate on your chosen wall location. Mark the drilling points. Drill pilot holes and secure the wall plate using appropriate screws and anchors for your wall type. Ensure it is level and firmly attached.
- Attach TV Bracket to TV: Secure the TV bracket to the back of your television using the provided VESA screws and washers that match your TV's VESA pattern. Ensure the bracket is centered and tightened securely.
- Hæng TV på vægpladen: Carefully lift the TV (with the bracket attached) and hook it onto the wall plate. Ensure the TV is properly seated and locked into place.
- Juster vinkel: Adjust the TV to your desired viewing angle using the tilt and swivel mechanisms.
Figur 5.2: Forenklede installationstrin
6. Betjening og justeringer
This full motion mount allows for flexible positioning of your display.
6.1. Hældningsjustering
The TV bracket allows for a tilt range of +30 degrees upward and -30 degrees downward. Loosen the tilt adjustment knobs on the side of the TV bracket, set the desired angle, and then tighten the knobs to secure the position.
6.2. Drejejustering
The wall-side attachment allows for a swivel of up to 45 degrees left or right. The actual range of motion may vary depending on the size of your television. Gently push the TV to the desired left or right angle.
Figure 6.1: Tilt Adjustment and Wall Distance
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.
- Tjek med jævne mellemrum: Every few months, check that all screws and connections are tight and secure.
- Rensning: Tør holderen af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Smøring: De bevægelige dele er designet til problemfri drift og kræver generelt ikke smøring. Hvis bevægelsen bliver stiv, skal du kontakte kundesupport.
8. Fejlfinding
Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV'et er ikke i vater | Wall plate or TV bracket not installed level. | Carefully adjust the wall plate or TV bracket. Ensure all screws are tightened after adjustment. |
| Mount føles ustabil | Screws are loose or incorrect wall anchors used. | Re-check all mounting screws for tightness. Ensure appropriate anchors were used for your wall type. Do not exceed weight capacity. |
| Difficulty adjusting tilt/swivel | Justeringsknapperne er for stramme, eller mekanismen er stiv. | Loosen adjustment knobs slightly before attempting to move. If still stiff, contact customer support. |
For issues not listed here, or if problems persist, please contact USX MOUNT customer support.
9. Garanti og support
USX MOUNT provides a 10 års kvalitetsgaranti from the date of purchase for this product. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your USX MOUNT product, please contact our customer service team. Please have your purchase information and model number (USX-WM1026) ready when contacting support.
