1. Introduktion og produktoversigtview
Thank you for choosing the BE COOL BC50LEF2301 50L Dehumidifier. This appliance is designed to efficiently remove excess moisture from the air in your home or commercial space, improving air quality and preventing issues like mold and mildew. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your dehumidifier.
Key features of your BE COOL BC50LEF2301 dehumidifier include:
- Powerful dehumidification: Removes up to 50 liters of moisture per day.
- Suitable for large areas: Effective in rooms up to 125 m³ (50 m²).
- User-friendly touch panel with LED display.
- Adjustable humidity levels from 30% to 80%.
- Miljøvenlig R290 kølemiddel.
- 24-timers timerfunktion.
- Automatisk afrimningsfunktion.
- Full water tank alarm and automatic shut-off.
- 7-liters aftagelig vandtank.
- Integrated dust filter.
- Power outage memory function.
- Udstyret med hjul for nem mobilitet.
2. Sikkerhedsinstruktioner
Læs alle sikkerhedsinstruktioner omhyggeligt, inden apparatet tages i brug, for at forhindre personskade eller beskadigelse. Gem denne manual til senere brug.
- Elektrisk sikkerhed: Sørg for, at strømforsyningen matcher voltage specified on the rating label. Do not operate the unit with a damaged power cord or plug. Do not share the power outlet with other appliances.
- Placering: Place the dehumidifier on a flat, stable surface. Maintain at least 20 cm (8 inches) clearance around the unit for proper airflow. Do not block air inlets or outlets.
- Kølemiddel: This appliance uses R290 refrigerant. Do not puncture the refrigerant circuit. Servicing should only be performed by qualified personnel.
- Vandtank: Always empty the water tank before moving the unit. Do not drink the collected water.
- Børn og kæledyr: Hold børn og kæledyr væk fra apparatet under drift.
- Rensning: Tag altid stikket ud af enheden, før du rengør eller udfører vedligeholdelse.
- Driftsbetingelser: Do not operate the unit in extremely high temperatures or in direct sunlight. The recommended operating temperature range is 5-32°C.
3. Produktkomponenter
Gør dig bekendt med hoveddelene i din affugter:
- Kontrolpanel: Located on the top, with touch buttons and an LED display.
- Luftudtag: Øverste front, hvor tør luft udstødes.
- Luftindtag: Bagtil, hvor fugtig luft suges ind.
- Støvfilter: Located behind the air inlet, removable for cleaning.
- Vandtank: Removable tank at the bottom front for collecting condensed water.
- Kontinuerlig dræningsudløb: (If applicable) Located at the rear for connecting a drain hose.
- Hjul: For nem flytning af enheden.
- Håndtag: Integrated handle for portability.
4. Opsætning
- Udpakning: Tag forsigtigt affugteren ud af emballagen. Gem emballagematerialerne til senere opbevaring eller transport.
- Placering:
- Placer enheden lodret på en fast, plan overflade.
- Ensure there is at least 20 cm (8 inches) of free space around the unit to allow for adequate air circulation.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas prone to splashing water.
- For optimal performance, operate the unit within the recommended temperature range of 5-32°C.
- Strømtilslutning: Sæt netledningen i en jordet stikkontakt. Sørg for, at stikkontakten opfylder enhedens strømkrav.
- Indledende brug: After transport, allow the unit to stand upright for at least 2 hours before plugging it in and turning it on. This allows the refrigerant to settle.
5. Betjeningsvejledning
The BE COOL BC50LEF2301 features an intuitive touch control panel and LED display for easy operation.
5.1 Kontrolpanelfunktioner
- Tænd/sluk-knap (⏻): Tryk for at tænde eller slukke enheden.
- Tilstandsknap (M): Cycles through different operating modes (e.g., Auto, Continuous, Drying).
- Humidity Setting (%): Adjusts the desired humidity level from 30% to 80% in 5% increments.
- Knap til ventilatorhastighed (☰): Selects between two fan speeds (High/Low).
- Timer-knap (⏱): Sets the 24-hour timer for automatic power ON or OFF.
- LED display: Viser aktuel luftfugtighed, indstillet luftfugtighed eller timerindstillinger.
5.2 Indstilling af ønsket luftfugtighed
Press the Humidity Setting button (%) repeatedly to cycle through desired humidity levels. The display will show the selected percentage. The unit will operate until the room humidity reaches the set level, then pause. It will resume operation if the humidity rises above the set level.
5.3 Timer funktion
The 24-hour timer allows you to set a specific time for the unit to turn ON or OFF automatically.
- Sådan indstiller du automatisk slukning: While the unit is ON, press the Timer button. Use the humidity setting buttons (or dedicated timer adjustment buttons if present) to set the desired number of hours (1-24) after which the unit will turn off.
- Sådan indstiller du automatisk tænding: While the unit is OFF, press the Timer button. Set the desired number of hours (1-24) after which the unit will turn on.
5.4 Water Tank Full Alarm and Auto Shut-off
When the 7-liter water tank is full, the unit will automatically stop operating, and an alarm will sound (beep). The LED display may also indicate a full tank. Empty the water tank and reinsert it correctly to resume operation.
5.5 Kontinuerlig dræning
For extended operation without needing to empty the water tank, you can connect a drain hose to the continuous drainage outlet at the rear of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable receptacle or floor drain.
5.6 Afrimningsfunktion
The unit is equipped with an automatic defrost function. If frost builds up on the evaporator coils, the unit will temporarily stop dehumidifying and run the fan to melt the frost. Dehumidification will resume automatically once the defrost cycle is complete.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din affugter.
6.1 Rengøring af støvfilteret
- Sluk for enheden, og tag stikket ud af stikkontakten.
- Locate the air inlet grille at the rear of the unit.
- Fjern støvfilteret.
- Clean the filter with a vacuum cleaner or wash it with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinserting.
- Reinsert the dry filter and close the grille.
Recommendation: Clean the dust filter every two weeks or more frequently depending on usage and air quality.
6.2 Tømning af vandtanken
- When the water tank is full, the unit will stop operating and alert you.
- Træk forsigtigt vandtanken ud fra enhedens forside.
- Tøm det opsamlede vand.
- Clean the tank periodically with mild detergent and water to prevent mold growth. Rinse thoroughly.
- Reinsert the empty tank firmly into the unit. Ensure it is correctly seated to allow the unit to resume operation.
6.3 Rengøring af enhedens yderside
Tør ydersiden af enheden af med en blød, damp klud. Brug ikke skrappe kemikalier, slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
6.4 Opbevaring
Hvis enheden opbevares i en længere periode:
- Unplug the unit and empty the water tank.
- Clean the dust filter and the exterior.
- Allow the unit to dry completely for at least 24 hours in a well-ventilated area.
- Opbevar enheden oprejst på et køligt og tørt sted, helst i originalemballagen.
7. Fejlfinding
Før du kontakter kundesupport, bedes du læse følgende fejlfindingsvejledning for almindelige problemer:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Ingen strømforsyning. Netledningen er ikke korrekt tilsluttet. Water tank full or not correctly inserted. | Kontroller strømudtag og afbryder. Sørg for, at strømkablet er tilsluttet korrekt. Empty water tank and reinsert it correctly. |
| Enheden kører, men affugter ikke. | Room temperature too low (below 5°C). Luftfilter tilstoppet. Humidity setting is higher than current room humidity. Døre/vinduer åbnes. | Operate unit within recommended temperature range. Rengør luftfilteret. Set desired humidity lower than current room humidity. Close doors and windows to isolate the room. |
| Indikatoren for fuld vandtank lyser, men tanken er ikke fuld. | Water tank not correctly inserted. Fejlfunktion i flydeafbryder. | Fjern vandtanken og sæt den godt fast på plads igen. Kontakt kundesupport, hvis problemet fortsætter. |
| Enheden er støjende. | Enheden står ikke på en plan overflade. Luftfilter tilstoppet. Problem med intern komponent. | Placer enheden på en flad, stabil overflade. Rengør luftfilteret. Kontakt kundesupport. |
| Rim på spoler. | For lav rumtemperatur. | The unit's automatic defrost function should activate. If not, turn off the unit and allow it to defrost naturally. Ensure operating temperature is above 5°C. |
If the problem persists after trying these solutions, please contact BE COOL customer support.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Vær cool |
| Modelnummer | BC50LEF2301 |
| Affugtningskapacitet | Approx. 50 Liters/24h |
| Vandtankkapacitet | 7 liter |
| Magt | 680 watt |
| Anbefalet rumstørrelse | Op til 125 m³ (50 m²) |
| Produktmål (L x B x H) | 26.6 x 37.8 x 61.5 cm |
| Varens vægt | 19 kilo |
| Materiale | Plast |
| Kølemiddel | R290 (miljøvenlig) |
| Blæserhastigheder | 2 |
| Særlige funktioner | Two fan levels, Dust filter, Full water tank alarm, Defrost function, Power outage memory, 24-hour timer, Touch panel, Removable tank, Wheels. |
9. Garanti og support
This BE COOL dehumidifier comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BE COOL customer support. Contact information can typically be found on the product packaging, the official BE COOL webwebstedet eller din købskvittering.
When contacting support, please have your model number (BC50LEF2301) and purchase date ready.