Maxxima 48-inch Hardwired LED Under Cabinet Strip Light Instruction Manual

1. Introduktion

Thank you for choosing the Maxxima 48-inch Hardwired LED Under Cabinet Strip Light. This product is designed to provide efficient and brilliant warm white illumination for various indoor and outdoor applications, including kitchens, living rooms, and cove lighting. This manual provides essential information for safe installation, operation, and maintenance of your LED strip light.

This 48-inch LED strip light delivers 1840 lumens of 3000K warm white light while consuming only 24 watts. It features a hardwired connection, eliminating the need for an external power supply, and is suitable for direct line voltage (120V) installations.

2. Sikkerhedsoplysninger

ADVARSEL: For at mindske risikoen for brand, elektrisk stød eller personskade skal du altid følge disse sikkerhedsforanstaltninger:

• Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale el-forskrifter og -forskrifter.
• Sørg for, at forsyningen voltage is 120V AC. Do not connect to any other voltage.
• Produktet må ikke ændres på nogen måde. Enhver ændring kan ugyldiggøre garantien og skabe en sikkerhedsrisiko.
• Se ikke direkte ind i LED-lyskilden, når den er tændt.
• Hold produktet væk fra brændbare materialer.
• This product is non-dimmable. Do not connect to a dimmer switch unless explicitly stated otherwise on the product packaging or specifications.
• For outdoor use, ensure installation is within a weatherproof JBox and connected to a GFCI breaker.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1x Maxxima 48-inch Hardwired LED Under Cabinet Strip Light
• Mounting Clips (quantity varies by length, typically 9 for 48-inch)
• Skruer
• Vægankere

Included mounting accessories: screws, wall anchors, and clips.

4. Specifikationer

5. Opsætning og installation

Before installation, ensure power is disconnected at the circuit breaker. This product requires hardwiring to a 120V AC power source. If you are unsure about electrical wiring, consult a qualified electrician.

Installationstrin:

1. Planplacering: Determine the desired location for your LED strip light. Measure the area to ensure the 48-inch strip fits appropriately. Mark the mounting points for the clips.
2. Mount Clips: Secure the mounting clips to the desired surface (e.g., underside of a cabinet) using the provided screws and wall anchors if necessary. Ensure clips are evenly spaced to support the strip light securely.
3. Rute ledninger: Route the hardwire cord from the LED strip light to your 120V AC power source junction box. The light includes a 23-inch hardwire cord for ample længde.
4. Hardwire Connection: Connect the LED strip light's wires to the household wiring inside the junction box. Typically, this involves connecting the black wire from the light to the black (hot) wire from the power source, the white wire from the light to the white (neutral) wire from the power source, and the ground wire (if present) to the household ground. Use appropriate wire connectors (e.g., wire nuts) to secure connections.
5. Secure Strip Light: Gently press the LED strip light into the mounted clips until it snaps securely into place. Ensure the strip is flush and straight.
6. Gendan strøm: Once all connections are secure and the light is mounted, restore power at the circuit breaker.
7. Test funktionalitet: Tænd lyskontakten for at kontrollere, at den fungerer korrekt.

Maxxima 48-inch LED strip light coiled, showing hardwired connection.

Diagram illustrating sleek design, hardwiring to 120V AC, and 2-foot hardwire cord.

Visuel installationsvejledning:

6. Betjeningsvejledning

The Maxxima Hardwired LED Under Cabinet Strip Light operates directly from your 120V AC power source. Once properly installed and wired to a wall switch or other control mechanism, simply toggle the connected switch to turn the light ON or OFF.

Note: This LED strip light is non-dimmable. Connecting it to a dimmer switch may result in flickering, damage to the unit, or improper operation.

Example of Maxxima LED strip light installed under kitchen cabinets.

Example of Maxxima LED strip light used for under cabinet and floor cove lighting in a kitchen.

7. Vedligeholdelse

The Maxxima LED Under Cabinet Strip Light requires minimal maintenance.

• Rensning: Ensure the power is off before cleaning. Wipe the light strip with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or electrical components.
• Inspektion: Undersøg jævnligt ledninger og montering for tegn på slid, skader eller løse forbindelser. Ret eventuelle problemer omgående.

8. Fejlfinding

If you experience issues with your Maxxima LED Under Cabinet Strip Light, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact Maxxima customer support.

9. Garanti og support

This Maxxima LED Under Cabinet Strip Light comes with a 3 års garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or acts of nature.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Please have your model number (MSL-482450W) and proof of purchase available.

Maxxima Customer Support: Refer to the contact information provided on the product packaging or the official Maxxima webwebsted.