BoxWave DirectSync PD Cable (3ft)
BoxWave DirectSync PD Cable (3ft) Instruction Manual
Model: DirectSync PD Cable (3ft)
Indledning
This manual provides essential information for the proper use and care of your BoxWave DirectSync PD Cable. This USB-C to USB-C cable is designed for efficient power delivery and high-speed data transfer, making it suitable for charging and syncing a wide range of compatible devices, including the RUIZU X31 (1.5 in).
Image: The BoxWave DirectSync PD Cable shown alongside a RUIZU X31 device, illustrating the product and its intended use.
Funktioner
- 100 Watt Power Delivery (PD): Capable of delivering up to 100W of power, suitable for charging smartphones, tablets, and even laptops.
- Braided Nylon Construction: Made with high-grade nylon materials for enhanced durability and resistance to tangles and fraying.
- Reinforced Strain Relief: Features durable, rubberized grommet strain reliefs on both USB-C connectors to prevent cable fraying and ensure a secure connection.
- High-Speed Data Transfers: Supports data transfer speeds up to 480Mbps, allowing for quick syncing of files while charging.
- Dobbelt funktionalitet: Simultaneously charges your device and transfers data.
- Længde: 3 feet (approximately 100 cm) for convenient use.
Billede: En detaljeret view highlighting the durable nylon braided exterior of the DirectSync PD Cable.
Image: An illustration demonstrating the reinforced strain relief design at the cable's connectors, which helps prevent damage from bending.
Opsætning
The BoxWave DirectSync PD Cable is designed for plug-and-play simplicity. No software installation or complex setup is required.
- Identify the USB-C port on your charging adapter or computer.
- Identify the USB-C port on your device (e.g., RUIZU X31, laptop, smartphone).
- Insert one end of the DirectSync PD Cable into the USB-C port of your charging adapter or computer.
- Insert the other end of the DirectSync PD Cable into the USB-C port of your device.
- Sørg for, at begge forbindelser er faste og sikre.
Image: The DirectSync PD Cable connected to a laptop, illustrating its capability for high-wattage strømforsyning.
Betjeningsvejledning
Opladning af din enhed
Once connected to a compatible power source (such as a wall adapter, power bank, or computer's USB-C port), the cable will begin charging your device. The 100W Power Delivery capability ensures fast and efficient charging for devices that support it.
Dataoverførsel
To transfer data, connect one end of the cable to your device and the other end to a computer's USB-C port. Your device should appear as a connected storage device on your computer, allowing you to transfer filemed hastigheder på op til 480 Mbps.
Image: The DirectSync PD Cable simultaneously charging a smartphone and connected to a laptop, demonstrating its charge and sync capabilities.
Opretholdelse
- Rensning: Brug en blød, tør klud til at tørre kablet og stikkene af. Undgå at bruge skrappe kemikalier eller slibende materialer.
- Opbevaring: Opbevar kablet et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer. Undgå at vikle kablet stramt op eller bøje det i skarpe vinkler for at forhindre indvendig skade.
- Håndtering: Always grasp the connector head when plugging or unplugging the cable. Do not pull on the cable itself, as this can damage the internal wires or the connectors.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden oplader ikke. | Loose connection, incompatible power source, or faulty device port. | Ensure both ends of the cable are securely connected. Try a different power adapter or USB-C port. Test the cable with another device if possible. |
| Langsom opladningshastighed. | Power source not providing sufficient wattage, or device does not support fast charging. | Use a power adapter that supports Power Delivery (PD) and provides adequate wattage for your device. Ensure your device supports fast charging. |
| Dataoverførslen virker ikke. | Loose connection, incorrect device settings, or computer port issue. | Verify cable connections. Check your device's USB connection settings (e.g., ensure it's set to "File Transfer" or "MTP"). Try a different USB-C port on your computer. |
| Kablet ser ud til at være beskadiget. | Fysisk stress eller forkert håndtering. | Discontinue use immediately to prevent potential damage to your devices. Contact BoxWave support for assistance. |
Specifikationer
- Model: DirectSync PD Cable (3ft)
- Varenummer: B0CNSFNRVR (ASIN)
- Mærke: BoxWave
- Farve: Jet Black
- Materiale: Nylon Braided (exterior), Copper (internal conductors)
- Længde: 3 feet (approx. 100 cm)
- Strømforsyning: Op til 100W
- Dataoverførselshastighed: Op til 480 Mbps
- Forbindelser: USB-C til USB-C
- Varens vægt: 3 ounce
Garanti og support
For information regarding warranty coverage or technical support for your BoxWave DirectSync PD Cable, please refer to the official BoxWave website or contact their customer service directly. Specific warranty terms may vary.
Note: No specific warranty period or direct support contact information was provided in the product details. Please consult the manufacturer's official resources.
Vigtige sikkerhedsoplysninger
- Do not expose the cable to water or excessive moisture.
- Undgå ekstreme temperaturer, både varme og kolde.
- Forsøg ikke at adskille eller ændre kablet.
- Opbevares utilgængeligt for børn og kæledyr.
- Use only with compatible devices and power sources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.