Deaf Bonce Apocalypse ATOM-900.2 PRO

1. Introduktion

Thank you for choosing the Deaf Bonce Apocalypse ATOM-900.2 PRO 2-Channel Class D Amplifier. Det her amplifier is engineered to deliver high-fidelity audio performance and robust power for your car audio system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your amplivligere.

Læs venligst denne manual grundigt, inden du forsøger at installere eller betjene den. Gem denne manual til senere brug.

2. Sikkerhedsoplysninger

Improper installation or use can lead to serious injury, damage to the amplifier, or damage to your vehicle. Always follow these safety guidelines:

• Frakobl køretøjets negative batteripol, før du påbegynder installationsarbejde.
• Sørg for, at alle ledninger er korrekt ført og fastgjort for at forhindre klemning eller beskadigelse.
• Brug strøm- og jordledninger med passende diameter som angivet i installationsafsnittet.
• Installer ampOpbevaringsenheden på et sted, der giver tilstrækkelig ventilation for at forhindre overophedning.
• Undgå at installere amplifier in areas exposed to moisture or direct sunlight.
• Forsøg ikke at reparere eller modificere ampselv. Overlad al service til kvalificeret personale.
• Brug passende sikkerhedsudstyr, herunder øjenbeskyttelse, under installationen.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• (1) Deaf Bonce ATOM-900.2 PRO Amplivligere
• Brugervejledning (dette dokument)
• Monteringshardware (skruer)

Image: Retail packaging for the Deaf Bonce ATOM-900.2 PRO amplifier, showing the product box.

4. Produktet er slutview og funktioner

The Apocalypse ATOM-900.2 PRO is a high-power 2-channel Class D amplifier designed for demanding car audio applications. Its compact design and advanced features ensure powerful and clear sound reproduction.

Nøglefunktioner:

• Højeffekt output: Delivers up to 900W RMS per channel at 1 Ohm.
• Bridgeable Configuration: Allows for a single powerful output of up to 1800W at 2 Ohms for subwoofers.
• Versatile Frequency Control: Equipped with adjustable Low Pass Filter (LPF) and High Pass Filter (HPF) for precise sound tuning.
• Efficient Class D Technology: Ensures high power output with minimal heat generation and power consumption.
• Kompakt og holdbart design: Engineered for longevity and ease of installation in various vehicle types.

Billede: Vinklet view of the Deaf Bonce ATOM-900.2 PRO ampløfter, showcasing dens kompakte design og køleribber.

5. Opsætning og installation

Korrekt installation er afgørende for din ydeevne og sikkerhed amplifier. If you are unsure about any part of the installation process, consult a professional installer.

5.1 Montering af Amplivligere

Vælg et monteringssted, der er tørt, godt ventileret og beskyttet mod direkte sollys eller overdreven varme. Sørg for, at der er tilstrækkelig plads omkring amplifier for air circulation. Secure the amplifier firmly using the provided mounting screws.

Billede: Top-down vinklet view of the Deaf Bonce ATOM-900.2 PRO amplifier, showing its overall dimensions and mounting tabs.

5.2 Ledningsforbindelser

Før du foretager nogen tilslutninger, skal du frakoble den negative pol på dit køretøjs batteri.

• Power (B+ / +12V): Connect a high-quality 4-gauge power cable directly from the positive terminal of the vehicle's battery to the +12V terminal on the amplifier. Install an appropriate fuse (not included) within 18 inches of the battery.
• Jord (GND): Connect a 4-gauge ground cable from the GND terminal on the amplifier to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid, low-resistance connection.
• Fjernbetjening (REM): Tilslut en fjernbetjeningsledning fra din hovedenheds fjernbetjeningsudgang til REM-terminalen på ampDenne ledning drejer amptænd og sluk for støjrelæet med din hovedenhed.
• Højttaler output: Connect your speakers to the CH1+ / CH1- and CH2+ / CH2- terminals. Ensure correct polarity. For bridged operation, refer to the diagram below. The minimum permissible load on each channel is 1 Ohm, and 2 Ohm in a bridged connection.
• Input (RCA): Connect RCA cables from your head unit's pre-out to the INPUT RCA jacks on the amplivligere.
• High-Input: If your head unit does not have RCA outputs, use the HI-INPUT connection.

Billede: Detaljeret view of the input and output terminals on the Deaf Bonce ATOM-900.2 PRO amplifier, showing power, ground, remote, speaker outputs, RCA inputs, and high-level input connections.

5.3 Indledende indstillinger

After all connections are made, reconnect the negative battery terminal. Before playing audio, set the amplifier controls to their initial positions:

• GEVINST: Set to minimum (fully counter-clockwise).
• FREQ (LPF/HPF): Set to the desired crossover frequency based on your speaker type. For full-range speakers, you might use HPF. For subwoofers, use LPF.
• X-OVER: Select LPF (Low Pass Filter), FULL (Full Range), or HPF (High Pass Filter) based on your system configuration.
• BASS BOOST: Set to 0dB (minimum).

Billede: Nærbillede view of the control panel on the Deaf Bonce ATOM-900.2 PRO amplifier, showing the GAIN, FREQ, X-OVER, and BASS BOOST knobs, along with input options.

6. Betjening af Amplivligere

Once installed, you can fine-tune the amplifier for optimal lydkvalitet.

6.1 Forstærkningsjustering

GAIN-kontrollen matcher ampadapterens indgangsfølsomhed i forhold til udgangsniveauet på din hovedenhed. Sådan indstiller du forstærkningen:

1. Drej på amplifier gain to minimum.
2. Set your head unit volume to about 75-80% of its maximum.
3. Spil et dynamisk musikstykke.
4. Langsomt øge amplifier gain until you hear distortion, then back off slightly until the sound is clear.

Note: The gain control is not a volume knob. Setting it too high can cause distortion and damage to your speakers or amplivligere.

6.2 Crossover Settings (LPF/HPF)

The crossover filters allow you to direct specific frequency ranges to your speakers or subwoofers.

• LPF (lavpasfilter): Allows frequencies below the set point to pass through. Typically used for subwoofers (e.g., 50-80 Hz).
• HPF (Højpasfilter): Allows frequencies above the set point to pass through. Typically used for full-range speakers or component sets (e.g., 80-120 Hz).
• FULD: Omgår delefiltret, så hele frekvensområdet kan passere.

Adjust the FREQ knob to select the desired cutoff frequency for your chosen filter.

6.3 basforstærkning

The BASS BOOST control provides an increase in output at a specific low frequency. Use this feature sparingly and with caution, as excessive bass boost can lead to distortion and potential damage to your speakers or amplifier. Start at 0dB and increase gradually if desired.

7. Vedligeholdelse

The Deaf Bonce Apocalypse ATOM-900.2 PRO ampLifier kræver minimal vedligeholdelse for at sikre langsigtet ydeevne.

• Rensning: Tør regelmæssigt af ampRengør ydersiden af ​​apparatet med en blød, tør klud for at fjerne støv og snavs. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Ventilation: Sørg for, at ampKøleribberne er fri for blokeringer for at muliggøre korrekt varmeafledning.
• Forbindelser: Kontrollér lejlighedsvis alle strøm-, jord-, fjernbetjenings- og højttalerforbindelser for at sikre, at de er fastgjorte og fri for korrosion.

8. Fejlfinding

Hvis du oplever problemer med din amplifier, refer to the following troubleshooting guide. If the issue persists, contact customer support.

8.1 Ingen strøm / Amplifer tænder ikke

• Check the in-line fuse near the battery. Replace if blown.
• Verify that the +12V, GND, and REM connections are secure and have proper voltage.
• Ensure the remote wire is receiving +12V from the head unit when it is on.
• Kontroller køretøjets batterivolumentage.

8.2 Ingen lydudgang

• Bekræft amplifier is powered on (power indicator light should be illuminated).
• Check RCA input connections from the head unit to the amplivligere.
• Kontroller højttalerledningernes forbindelser på begge amplifier og højttalerne.
• Ensure the head unit is providing an audio signal.
• Check the GAIN setting; it might be too low.

8.3 Forvrænget lyd

• Reduce the GAIN setting on the amplivligere.
• Lower the volume on your head unit.
• Kontroller højttalerimpedansen; sørg for, at den matcher amplifier's capabilities (minimum 1 Ohm per channel, 2 Ohm bridged).
• Verify that speaker wires are not shorted or touching the vehicle chassis.
• Adjust crossover settings (LPF/HPF) to ensure speakers are playing within their optimal frequency range.
• Reduce BASS BOOST if it is set too high.

8.4 AmpOverophedning af væske

• Sørg for tilstrækkelig ventilation omkring ampFjern eventuelle forhindringer.
• Check speaker impedance; running below the minimum recommended impedance can cause overheating.
• Reducer GAIN-indstillingen.
• Verify proper ground connection.

9. Specifikationer

Technical specifications for the Deaf Bonce Apocalypse ATOM-900.2 PRO amplivligere:

10. Garantioplysninger

This Deaf Bonce Apocalypse ATOM-900.2 PRO amplifier is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Deaf Bonce webwebstedet for detaljerede garantivilkår og -betingelser. Gem din købsbevis til eventuelle garantikrav.

11. Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Deaf Bonce dealer or visit the official Deaf Bonce webwebsted for supportressourcer og kontaktoplysninger.

Deaf Bonce Official Webwebsted: Visit the Deaf Bonce Store on Amazon