Generisk vejrbestandigt og holdbart 52" rundt spisebord i støbt aluminium med paraplyhul - brugsanvisning

Indledning

Tak for købetasing the Generic All-Weather and Durable 52" Round Cast Aluminum Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor dining table. Please read these instructions carefully before assembly and retain them for future reference.

Sikkerhedsoplysninger

For at sikre sikker brug og forhindre skader, bedes du overholde følgende sikkerhedsretningslinjer:

• Saml altid bordet på en blød, ren overflade for at undgå ridser.
• Sørg for, at alle bolte og skruer er forsvarligt spændt før brug. Kontroller med jævne mellemrum og efterspænd efter behov.
• Do not overtighten fasteners during assembly, as this can strip threads or damage components.
• Avoid using power tools or socket drivers for assembly, as they can apply excessive force and damage the table. Hand tools are recommended.
• Hold små dele væk fra børn under montering.
• Du må ikke stå eller sidde på bordet.
• Placer bordet på en plan overflade for at forhindre det i at vælte.
• Use the umbrella hole only with appropriately sized and weighted umbrellas, secured properly.

Billedbeskrivelse: A diagram illustrating assembly steps and important safety warnings. The warnings explicitly state "DO NOT OVER TIGHTEN", "NO POWER TOOLS", and "NO SOCKET DRIVERS" with corresponding icons.

Pakkens indhold

Før monteringen påbegyndes, skal du kontrollere, at alle nedenstående dele er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, må du ikke fortsætte med monteringen, men kontakte kundesupport.

Billedbeskrivelse: A detailed diagram illustrating all components of the dining table, labeled A through P, along with their corresponding descriptions and quantities. This includes the table top, center rings, legs, foot levelers, umbrella cover, various screws, nuts, washers, PVC covers, nut caps, and wrenches.

Opsætnings- og monteringsvejledning

Follow these steps to assemble your dining table. It is recommended to have two people for assembly.

1. Step 1: Attach Legs to Table Top Frame
   

   Place the table top (A) upside down on a soft, non-abrasive surface. Attach the four table legs (C) to the underside of the table top frame. Secure them using screws (D), small flat washers (I), and small lock washers (J). Do not fully tighten at this stage.

   

   Billedbeskrivelse: Diagram showing the initial assembly step where four table legs (C) are attached to the inverted table top (A) using screws and washers.
2. Step 2: Connect Center Rings and Secure Legs
   

   Connect the two center rings (B) between the attached table legs (C). Use bolts (F), big flat washers (G), and big lock washers (H) to secure the center rings to the legs. Then, attach the nuts (E) and nut caps (M) to the bolts. Once all components are loosely assembled, gradually tighten all screws and bolts evenly until secure. Remember not to overtighten.

   

   Billedbeskrivelse: Diagram illustrating the second assembly step, showing the two center rings (B) being connected to the table legs (C) with bolts, washers, and nuts. This step also shows the final tightening of all fasteners.

3. Step 3: Attach Foot Levelers and Umbrella Cover
   

   Carefully turn the table upright. Attach the foot levelers (O) to the bottom of each table leg. These can be adjusted to ensure the table is stable on uneven surfaces. Insert the umbrella cover (K) into the center hole of the table top.

   

   Billedbeskrivelse: Diagram showing the final assembly step, where the table is upright, and foot levelers (O) are attached to the legs, and the umbrella cover (K) is placed in the table's center hole.

Your table is now assembled. Ensure all connections are firm and the table is stable before use.

Betjeningsvejledning

This dining table is designed for outdoor use and provides a stable surface for dining and other activities.

• Placering: Position the table on a flat, stable surface. Use the adjustable foot levelers (O) to compensate for minor unevenness in the ground.
• Brug af paraply: The table features a 2-inch umbrella hole. To use an umbrella, remove the umbrella cover (K) from the center of the table top. Insert the umbrella pole through the hole. Ensure the umbrella base is stable and weighted appropriately to prevent tipping in windy conditions.
• Vægt kapacitet: Undgå at placere alt for tunge genstande på bordet for at forhindre beskadigelse.
• Miljøforhold: While designed for all-weather use, consider covering the table during extreme weather conditions (heavy snow, strong winds, prolonged rain) to extend its lifespan.

Billedbeskrivelse: En fuld view of the assembled 52-inch round cast aluminum dining table, showcasing its lattice design and the central umbrella hole.

Opretholdelse

Proper maintenance will help preserve the appearance and extend the life of your dining table.

• Rensning: Clean the table regularly with a soft cloth, mild soap, and water. Rinse thoroughly and dry completely to prevent water spots. Avoid harsh chemicals, abrasive cleaners, or brushes that could damage the powder-coated finish.
• Inspektion: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
• Vinteropbevaring: In areas with harsh winters, it is recommended to store the table indoors or cover it with a protective outdoor furniture cover to prevent damage from extreme cold, snow, and ice.
• Rustforebyggelse: While cast aluminum is rust-resistant, minor scratches or chips in the powder coating can expose the metal. Touch up any damage promptly with appropriate outdoor furniture paint to prevent oxidation.

Fejlfinding

If you encounter any issues with your dining table, refer to the following common problems and solutions:

• Bordet er vakkelvornt:
  • Ensure all assembly bolts and screws are securely tightened.
  • Adjust the foot levelers (O) on each leg to stabilize the table on uneven surfaces.
  • Verify the table is placed on a flat, level ground.
• Parts Do Not Align During Assembly:
  • Do not fully tighten any fasteners until all parts are loosely assembled. This allows for minor adjustments.
  • Review the assembly steps and diagrams to ensure correct orientation of parts.
  • If a part appears bent or damaged, contact customer support for a replacement.
• Umbrella Does Not Fit:
  • Ensure the umbrella pole diameter is compatible with the 2-inch umbrella hole.
  • Remove the umbrella cover (K) before inserting the umbrella.

Specifikationer

Billedbeskrivelse: A diagram showing the key dimensions of the round dining table, including a diameter of approximately 51.97 inches and a height of 29.13 inches.

Garantioplysninger

Specific warranty details for this product are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product listing on the retailer's webhjemmeside eller kontakt sælgeren direkte.

Kundesupport

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact the seller or manufacturer through the platform where the product was purchased. Please have your order number and product model (patio-coffee-tables) available when contacting support.