Avenli WSL17606USV41

Avenli 4-personers oppustelig firkantet spa - kulstofgrå brugermanual

Model: WSL17606USV41

Indledning

Thank you for choosing the Avenli 4-Person Inflatable Square Spa. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new inflatable spa. Please read this manual thoroughly before installation and use, and keep it for future reference.

Avenli 4-Person Inflatable Square Spa in Carbon Grey

Image: The Avenli 4-Person Inflatable Square Spa in Carbon Grey, showcasing dens firkantede form og eksterne pumpeenhed.

Vigtige sikkerhedsoplysninger

Always follow basic safety precautions when installing and using this electrical appliance. Failure to follow these instructions could result in injury or death.

  • Do not permit children to use this spa unless they are supervised at all times.
  • Ensure the spa is placed on a flat, even surface capable of supporting the weight of the spa when fully filled (approximately 1,200 pounds) and its occupants.
  • Do not operate the spa if the temperature is below 39 degrees Fahrenheit (4 degrees Celsius).
  • Always use a Ground Fault Circuit Interrupter (GFCI) for electrical connection.
  • Do not use extension cords. Connect the spa directly to a grounded outlet.
  • Maximum water temperature is 104°F (40°C). Consult a doctor before use if pregnant, diabetic, or in poor health.
  • Do not consume alcohol or drugs before or during spa use.
  • Regularly clean and maintain the spa water to prevent bacterial growth.

Pakkens indhold

Bekræft, at alle komponenterne nedenfor er inkluderet i din pakke:

Diagram showing all included components: liner, pump unit, top cover, ground cloth, GFCI, air valve, inflating hose, pump unit connectors, caps, repair kit, filter cartridge, filtration cartridge support.

Image: A visual representation of all items included with the Avenli Inflatable Spa, such as the spa liner, pump unit, cover, ground cloth, and various accessories.

  • Inflatable Spa Liner
  • Pump Unit with Control Panel
  • All-Weather Resistant Top Cover with Secure Locking Clips
  • Jorddug
  • GFCI stik
  • Luftventil
  • Inflating Hose
  • Pump Unit Connectors (3)
  • Kasketter
  • Reparationssæt
  • Filterpatron
  • Filtration Cartridge Support

Opsætningsinstruktioner

Setting up your Avenli Inflatable Spa is a straightforward process, typically taking less than 10 minutes for initial inflation.

1. Valg af sted

Choose a flat, level area free of debris. The surface must be able to support the total weight of the spa when filled with water and occupants (approximately 1,200 pounds).

Avenli Inflatable Spa placed on a wooden deck, demonstrating proper site selection.

Image: The inflatable spa positioned on a sturdy outdoor deck, illustrating a suitable installation location.

2. Laying the Ground Cloth

Unfold the ground cloth and place it on your selected site. This provides an extra layer of protection for the spa liner.

3. Inflation

  1. Unpack the spa liner and place it on the ground cloth.
  2. Connect the inflating hose to the pump unit and the spa's inflation valve.
  3. Plug in the pump unit (ensure GFCI is functional).
  4. Turn on the inflation function on the pump unit. The spa will inflate rapidly.
  5. Once fully inflated, disconnect the hose and secure the valve cap.
Avenli Inflatable Spa with pump unit attached, ready for inflation or operation.

Image: The inflatable spa body connected to its external pump unit, illustrating the setup for inflation and water circulation.

4. Påfyldning med vand

Fill the spa with a garden hose to the recommended water level indicated on the inside of the spa liner. Do not overfill.

5. Attaching the Pump Unit

Connect the pump unit to the spa liner using the provided connectors. Ensure all connections are tight to prevent leaks.

Betjeningsvejledning

The Avenli spa features an intuitive LED control panel for easy operation.

Diagram of the Avenli spa control panel with buttons for filtration, heat, massage, lock, temperature increase/decrease, and temperature unit selector.

Billede: En detaljeret view of the spa's LED control panel, highlighting buttons for various functions such as heating, massage, filtration, and temperature adjustment.

Kontrolpanelets funktioner:

  • LED display: Viser den aktuelle vandtemperatur og indstillinger.
  • Varme knap: Activates the heating system. The heater will maintain the set temperature.
  • Massage knap: Activates the air jet massage system (90 air jets).
  • Filtration Button: Controls the water filtration system.
  • Låseknap: Låser/oplåser kontrolpanelet for at forhindre utilsigtede ændringer.
  • Knapper til temperaturstigning/sænkning: Adjusts the desired water temperature. Maximum temperature is 104°F (40°C).
  • Temperature Units Selector: Toggles between Celsius (°C) and Fahrenheit (°F).

Indledende opvarmning:

After filling the spa, press the Heat Button. The spa will begin heating the water to your desired temperature, up to 104°F (40°C). Heating time will vary based on ambient temperature and initial water temperature.

Opretholdelse

Regular maintenance is crucial for the longevity and hygiene of your inflatable spa.

Vandkvalitet

  • Test water regularly using spa test strips.
  • Maintain proper pH levels (7.4-7.6) and sanitizer levels (e.g., chlorine or bromine).
  • Change spa water every 1-3 months depending on usage.

Filterpatron

  • Rengør filterpatronen ugentligt ved at skylle den med en haveslange.
  • Replace the filter cartridge every 2-4 weeks, or more frequently with heavy use.

Rengøring af spaen

  • Drain the spa completely using the convenient bottom drain.
  • Wipe down the interior and exterior surfaces with a soft cloth and mild, non-abrasive cleaner.
  • Skyl grundigt og lad det tørre før genopfyldning eller opbevaring.

Opbevaring

When not in use for extended periods, or for portability:

  1. Drain all water from the spa.
  2. Deflate the spa completely.
  3. Ensure the spa is thoroughly dry to prevent mold and mildew.
  4. Fold neatly and store in a dry, protected area, away from extreme temperatures.
Avenli Inflatable Spa with its protective cover installed, showing secure locking clips.

Image: The inflatable spa with its weather-resistant cover securely fastened, demonstrating how to protect the spa when not in use.

Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

ProblemMulig årsagLøsning
Spa not inflating or deflating quickly.Valve not properly sealed; pump unit issue.Ensure inflation valve is fully open/closed. Check pump unit connections.
Water not heating or reaching desired temperature.Ambient temperature too low; filter dirty; heater malfunction.Ensure ambient temperature is above 39°F. Clean or replace filter. Contact support if issue persists.
Spa losing air.Leak in liner; valve not sealed.Check all valves for proper sealing. Use included repair kit for small punctures.
Kontrolpanelet svarer ikke.Panel locked; power issue.Press the Lock button to unlock. Check power connection and GFCI.

Specifikationer

FeatureDetalje
ModelnavnAvenli 4-Person Inflatable Square Spa - Carbon Grey
ModelnummerWSL17606USV41
Kapacitet4-Person
Vandkapacitet148 gallons
Dimensioner (L x B x H)58 cm x 58 cm x 25 cm
MaterialePolyvinylchlorid (PVC)
Varens vægt59 pund
Strømforsyning110-120V, 60Hz, 1380W
Maksimal temperatur104°F (40°C)
Antal luftdyser90
Diagram showing the dimensions of the Avenli Inflatable Spa: Outer Wall 58.3 inches, Inner Wall 44.1 inches, Height 25.6 inches, Pump Unit Height 18.5 inches, Pump Unit Depth 13.7 inches.

Image: A technical diagram illustrating the precise dimensions of the Avenli Inflatable Spa, including outer and inner wall measurements and overall height.

Garanti og support

For warranty information, technical support, or to purchase replacement parts, please contact Avenli customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Sælger: Four Seasons Pool Supply

Returpolitik: 30 dages refunderings-/erstatningspolitik fra købsdatoen.

© 2024 Avenli. Alle rettigheder forbeholdes.